TE Connectivity
Berwyn, PA 19312
Heat-Shrinkable Tubing meets new standards.
Revised material formula makes Versafit 3x, V2, and V4 heat-shrinkable tubing meet MIL SPEC-SAE-AMS-DTL-23053/5 Class 1 and 3 and new standard UL 224 VW-1 for heat aging and heat shock. Tubing is free from polybrominated bi-phenyls and polybrominated biphenyl oxides and ethers, simplifying end-life disposal. Applications include insulation and protection of wire bundles and components in...
Read More »
Connector System eliminates wire stripping.
MTA-50 family of insulation displacement contact (IDC) style connectors have 0.050 in. contact centerlines in single, staggered row. This reduces board space for wire-to-board connectors while simplifying wire termination. Pre-loaded IDC contacts eliminate need for wire stripping and accommodate manual or semi-automatic assembly. Connectors are available in 2 to 28 contact positions and accept 26...
Read More »
SPDT Relay fits in small places.
Slim PCH series relay minimizes need for board space. It has silver-tin oxide contacts in form C (SPDT-NO) arrangement. Normally open contacts are rated at 5A resistive at 277 Vac or 30 Vdc, while normally closed contact set is rated for 3 A. DC coils are available for 5-48 V and nominal coil power requirement is 400mW. Relays are UL recognized, CSA certified and VDE approved. Applications...
Read More »
Power Connectors eliminate mating problems.
Genderless 600 Vac or dc connectors have impact resistant, UL 94V-0 polycarbonate housing that is keyed and color-coded to prevent mismating. Intermating is not possible between connectors of different colors. Once mated, connectors resist vibration. Two pole, 50 A connectors are rated for up to 10,000 mating cycles. Applications include electric vehicles, material handling equipment, industrial...
Read More »
Interconnect System has phosphor bronze contacts.
AMPMODU Micro Interconnect System, based on high-density 0.8mm centerline contacts, is suitable for cable-to-board, cable-to-cable, and board-to-board applications. Dual row connector is available in 4 through 40 positions. F crimp for 28 AWG wire provides wire termination, and contacts terminated to 28 AWG wire are rated at 1 amp. Housings are SMT compatible UL 94V-0 LCP, and temperature rating...
Read More »
Convenience Outlet accommodates high current.
20A Convenience Outlet is designed for panel-mount applications and has quick snap-in configuration that offers insulation displacement connections. It will accept 20A and 15A plugs and is suitable for use in surge protectors, power outlets, and computer peripheral applications. Current capacity is up to 20A with 12 AWG solid wire at 125 Vac, 60 Hz. With 14 AWG solid wire, current capacity is up...
Read More »
Tape Feeder handles small components.
Narrow profile ThinPRO Electronic Tape Feeder places 0201/0402 components and parts smaller than 0.040 in. Its direct-drive motor accurately advances plastic, paper, or foil tapes to pick position. Smooth action of motor provides controlled acceleration and deceleration, which minimizes jarring of components. It has 2 optical encoders for precision component presentation, and is interchangeable...
Read More »
Soft Shell Connectors are available in 2 to 12 positions.
Micro MATE-N-LOK 3mm-pitch connectors have dual-beam contacts for improved mating area, and high temperature housings for IR processing. Single row contacts on 3mm centerlines accommodate installations where thin, tight connectors capable of handling up to 5 A are required. Units can provide power and signal I/O and power interface interconnections.
Read More »
General Purpose Relay switches loads up to 15 amps.
Series OEG PCLH-2 is available with plug-in terminals for socket mounting and printed-circuit terminals for board mounting. Silver-alloy contacts are double-pole, double-throw form C, and are rated 15 A @ 120 Vac resistive and 10 A @ 250 Vac or 30 Vdc. AC coils are available from 6 to 240 V and DC coils from 6 to 110 V. Enclosed relay is suitable for electrical panels, factory automation...
Read More »
Square Continuous Posts accommodate any centerline.
AMPMODU square posts can be inserted into printed circuit boards in virtually any configuration. Post is constructed of brass, comes packaged on reel, and is notched at desired length. Carrier strip is not required. Posts are available in 0.025 and 0.045 post sizes, in lengths of 0.400 to 1.0 in. in 0.010 in. increments, with tin or gold plating. The 0.025 square post is rated for up to 3A while...
Read More »