TE Connectivity
Berwyn, PA 19312
Pulse Wire Sensor suits various industrial applications.
Product senses rotor positions, serves as revolution counter, and detects speed and rotation. Contactless sensor requires no external power to operate. Permanent-magnet design generates output voltages from 3.5-4 Vdc and requires no voltage amplification for switching electronics. Adaptable to custom applications, sensor is suitable for applications with drive frequencies of 0-10 kHz.
Read More »Coax Cable substitutes for standard RG 316 cable.
RAYCHEM(TM) coaxial cable is dimensionally equivalent to standard RG 316 cable and can be terminated using standard connectors. It offers non-melting insulation and low attenuation loss up to 50 GHz. Impedance is 50 ohms with velocity propagation of 66%. Max attenuation is 41.67 dB/100 ft at 2.35 GHz. Bare-copper center conductor is surrounded by RAYOLIN(TM) L dielectric material, tin-copper...
Read More »
Receptacle automatically insulates contact.
Fully-insulated Ultra-Pod .110 Series FASTON Receptacle, for .110 tabs at .020 and .032 thickness, uses F-crimp wire termination. It accepts 22-18 AWG wire with insulation diameters up to .120 in. Brass or tin-plated brass contacts are rated for 600 Vac and are suitable for solid or stranded wire. Housings meet UL 94V-0 or UL 94V-2 flammability requirements. Applications include household...
Read More »
Power Connectors employ genderless housing design.
Series 120A AMP power connectors are offered in 2-pole battery version or single-pole, stackable general-purpose version. They are rated for 120 A at 600 V (AC or DC) when using 2 AWG wire. Contacts are silver plated copper with self-cleaning design, suitable for up to 10,000 mating cycles. Connectors have impact resistant, UL 94V-0 polycarbonate housing and can be used in electrical vehicles,...
Read More »
Connector Kits suit both simplex and duplex applications.
Multimode LC Connector Plug Kits are available for 900 Ã-µm buffered cable and 1.6 to 2.0 mm, 2.4 mm, and 3.0 mm jacketed cable. Knurled crimp body enables cable retention, while wide thumb latch makes it easy to unplug. Design utilizes one connector body style for both simplex and duplex applications. Duplexing is accomplished via field installable clip, which allows polarization corrections.
Read More »
Cable Clamp suits circular plastic connectors (CPCs).
Right-angle, covered cable clamp attaches to new or existing CPCs and allows 360Ã-
Read More »
Power Rocker Switches are available in 3 sizes.
Available in 13 x 19 mm, 14 x 28.5 mm, and 25 x 28.5 mm sizes, switches fit into industry standard panel cutouts. They offer various termination methods, illumination, single/double pole capability, and markings. Dust resistant switches are rated for 16 A at 125 Vac (1/3 HP) and handle capacitive loads of up to 50 A for 3 msec. Actuation force ranges between 150 and 1,250 g (model dependent), and...
Read More »
Circuit Breaker is suitable for up to 40 A.
P&B W54 thermal circuit breaker can not be manually tripped. Push-button doubles as reset mechanism and indicator when unit has been tripped. Quick connect .250 in. tabs and #8-32 screws are available for wire termination. M11 x 1.0 thread and 3/8 in.-24 UNF thread is standard. Unit will continuously carry 100% of rated capacity. At 135% of rated capacity, it will trip within 1 hour and its trip...
Read More »
Connector accommodates high-volume manufacturing.
HTS HD Series modular connector system is comprised of rectangular outer shell made from die cast zinc or aluminum, inner contact housing, and Multimate contacts, which employ pin and socket design that is either stamped and formed or screw-machined. Contacts accept 30 to 14 AWG stranded wire. Connector accommodates 7 to 128 contacts and is rated for 250 Vac at 10 A per contact. Applications...
Read More »
Electrical Terminal eliminates post insulation.
Ultra-Pod .250 Series FASTON Tab offers F-crimp wire termination and is applied with all-in-one applicator that crimps terminal to wire and inserts it into insulation housing. Tab connects with .250 x .032 receptacles and accepts 18-10 AWG wire with insulation diameters up to .200. Contacts are made from tin-plated brass, and nylon housing meets UL 94V-2 flammability requirements. Contacts, which...
Read More »