Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Floor Finish suits high-speed maintenance programs.
Gallery ultra high speed (UHS) floor finish provides wet-look gloss and responds quickly to UHS burnishing. It provides mark resistance and durability.
Read More »
Signal-Conditioner Module offers dual channels.
Test Friendly(TM) Dynamics Model 4120 provides 40kHz signal amplification, non-linearity correction, and cold-junction compensation for conversion of millivolt output of thermocouple into 0 to 10 V signal, linearly proportional to temperature. Programmable voltage reference is provided for internal self test and automated user calibration functions. Each channel can be configured for use with any...
Read More »
Frame Grabber has half-height, PCI-compatible form factor.
PicPort-Color acquires images from S-Video and Composite video sources in NTSC/RS170/PAL/CCIR/SECAM or PAL-M formats. Onboard electronics insure conservation of color information during digitalization process. LV-SDS Software Suite includes Orchid library, with ActiveX/OCX and regular function calls, Daisy C/C++ core library, Daisy Real-time Application Library, Video for Windows driver, Twain...
Read More »
Linear Thruster withstands static side loads up to 520 lbs.
Extruded Linear Thruster, with 32 mm bore, incorporates stainless-steel guide shafts and composite bushings in unitized body, making it suitable for corrosive or wash-down environments. Body and tooling plate are anodized aluminum. Bushing/guide shaft combination provides smooth motion and heavy-duty load carrying. Stroke lengths are available up to 10 in. in length.
Read More »
Plasma Cutter offers short repositioning time.
Aviator XLT, with FastCAM automatic nesting software, combines liquid-cooled plasma system with Burny 1250 CNC control to produce precision cutting of 12 ga steel at 250 ipm or 1/4 in. stainless at 100 ipm. Traverse speed is 500 ipm and vertical-lift speed of C&G AVC Plus plasma torch lifter 150 ipm. Welded, tubular-steel frame supports integrated 6 x 12 ft down-draft cutting table. Pneumatic air...
Read More »
Welding Wire suits pulverizer rebuilding applications.
Stoody(R) CP2000 open arc-welding wire, composed of chromium-carbide alloy, can be applied to carbon, low alloy, and manganese steels. Stoody CP-2000 has hardness HRC of 58-64, and is suitable for hot-wear applications up to 900 deg F. Model with 7/64 in. dia has 400 to 650 amperage range and voltage range of 28 to 32. Model with 1/8 in. dia wire has 450 to 650 amperage range and voltage range of...
Read More »
Alternator provides power for stick welding.
Power-Plus(R) Exciter(TM) TA-6/200-KBC provides 5.5 kVA of 115/230 Vac auxiliary power, 200 dc amps @ 60% duty-cycle welding output, and 12/24 V battery charger. Separate windings are used for welding and auxiliary power. Generator is powered by 15 hp, 1-cylinder, gas fueled, air-cooled engine. Alternator provides smooth weld output for STICK or scratch-start dc TIG welding applications. It fits...
Read More »
Portable DC Inverter offers constant-current output.
Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...
Read More »
Accelerometer offers frequency range from 0 to 2400 Hz.
Model JTF, with anodized-aluminum housing, provides overload protection to 20x range. It is available in 3 different mounting configurations: flat-pack rectangular unit mounts with 2 bolts; bolt-mount model has center through hole; and stud-mount utilizes tapped hole in base. Triaxial mounting block is available for flat-pack style to mount 3 accelerometers for sensing vibration in each of 3 axes.
Read More »
Power Transformers meet CSA, UL, IEC, and VDE standards.
Series AU/BU Toroidal transformers convert 120/240V primary input to 6 to 120 V secondary output over range of 20 VA to 10 KVA. Applications include UPS systems, inverters/converters, fuel cells, power conditioners, and lighting equipment. Options include encapsulation, mounting, terminal strips, and additional shielding. Transformers are recognized under UL478, UL1446, UL6500, and UL544.
Read More »