Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Bellow Couplings assemble onto existing equipment.
BK2 series couplings are made with split hub and stainless steel bellow. Hub allows user to assemble coupling on existing equipment where shaft ends cannot be moved. Stainless steel bellow has high torsional rigidity with zero backlash; can compensate for axial, angular, and lateral misalignment simultaneously; and has low moment of inertia. Shaft hubs are bored for shaft diameters from 0.12 to...
Read More »Single Board Computers have 256K Flash/128K SRAM.
OP6800 MiniCom C-programmable operator interface and single-board computer provides Internet/Ethernet connectivity and 24 industrialized, digital I/O. Also available without Ethernet connectivity, OP6810 MiniCom provides integrated control, display, and networking capabilities. Both models offer international-character 122 x 32 pixel LCD, user-relegendable keypad with 7-key/7-LED interface, 4...
Read More »Transfer Pumps move wrapped materials without unraveling.
Powered by compressed air, modified material transfer pumps offer instantaneous vacuum flow and high air velocity, allowing material to pass through at high speeds without interference. They are available in anodized aluminum in 16 standard sizes, with internal diameters from 1/8 to 4 in., and vacuum flow rates from 3 SCFM to over 375 SCFM. Pumps are suitable for automating bulk-packaging...
Read More »Incandescent Light features NEMA 4X/IP65 enclosure.
Streamline(TM) LP3I light is available in 3 mounting options and 5 colors with operating voltages of 12 Vdc, 24 Vdc and 120 Vac. LP3PI has integrated 1/2 in. pipe mount; LP3MI has 1 1/2 in. male-pipe mount; and LP3TI features 2-hole design for surface mounting. LP3I is UL and cUL listed, and available in amber, blue, clear, green and red.
Read More »PCB Interfaces provides up to 300 I/Os per connector.
FleXYZ interfaces provide flexibility in X, Y, and Z axes by specifying number of rows, pins per row, and desired board spacing with standard interconnects. YTT Series headers and YTW Series board stackers mate with YTQ and YTS Series sockets to provide board spacings from 0.329 to 1.165 in. By using YTE Series elevated socket, board spacing can be increased to 1.705 in. Interconnects have 4-6...
Read More »Lubrication System operates up to 4 valves.
MicroCoat uses low volume low pressure (LVLP) air to apply lubricant as fine film to reduce oil consumption by as much 70%. Compact, low-maintenance spray valves fit in tight press areas, and can be mounted in any position above or below stock. Valves coat every square in. of metal with fine, consistent film of oil, eliminating mist, dripping, or waste. System offers individual flow controls for...
Read More »COG Display suits PDAs and handheld devices.
Model AGM3224K chip-on-glass (COG) module has 320 x 240 QVGA format display. With depth of only 2.2mm, it is suitable for portable applications such as PDAs and other handheld devices. Module is 88.3 x 69.1 x 2.2 mm, with dot size of 0.225 x 0.225 mm.
Read More »Bar Code Marking System stores more data.
Data Matrix marking system produces 2D bar code that can be read in any orientation, stores 50 times data as standard bar codes, and uses 1/4 of space required for bar codes. System uses double-stylus head, where one head is used for data-matrix encryption mark and other marks standard characters. Both heads run side-by-side, optimizing speed. System reads mechanical and laser markings on metal...
Read More »Portable Gas Monitors suit various applications.
Solus portable monitors include 3 models: Solus-II is maintenance-free for 2 years, and detects oxygen, hydrogen sulfide, and carbon monoxide; Solus-XP detects combustible gases; and Solus-Plus has field-changeable sensors for switching between gases (Cl2, CO, H2, H2S, HCN, NO2, O2, or SO2). Solus-Plus also comes with data-logging and vibrating alarm. All models offer audible and visual alarms...
Read More »RF Edgeboard Connector accepts RG59 or RG6 cables.
F Type V-Bite(TM) RF edgeboard connector offers up to -40.3 dB return loss at 2.3 GHz. 75 ohm connector is engineered for signal integrity in RF applications, and snaps and locks into place for secure PCB retention during hand or re-flow soldering. It is supported both above and below board to minimize stress on solder area. Manufactured of machined brass, and employing straight-through contact...
Read More »