Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
LDO Regulator provides standby power.
Low dropout regulator, in IttyBitty(TM) SOT-23-5 package, suits applications in portable and fixed systems and consume only 18 microA of quiescent current. Model MIC5233, with input voltage range of 2.3 to 36 V, supplies up to 100 mA of output current. Model MIC5235, with input voltage range of 2.3 to 24 V, supplies 150 mA. Applications include keep-alive circuits in battery or telecom systems,...
Read More »
Direct Drive Motors allows large through holes.
ULT Direct Drive motors are available in 64, 127, 165, and 190 mm O.D. with through holes up to 75% of OD. Peak torque is 1800 oz-in. Machine-wound stator coils optimize motor constant and keep axial length to minimum. Single-piece, multi-pole magnets are available with custom hubs, allowing simple integration into rotary stage design. Standard windings are available for 12, 24, and 48 V, and...
Read More »
Differential pH probe wires directly to PLC.
AquaMetrix P65 has built-in, 2-wire, 4 to 20 mA transmitter and replaceable, double-junction, salt bridge for extended service life. It is available in 1 1/2 in. threaded body and 1 1/4 in. variable insertion depth models. Probe provides true, 3-electrode, differential pH measurement, which reduces ground loop interference.
Read More »
Filter Dryer produces dry cakes.
RT(R) filter can be used with either hot-gas drying or infrared drying. Filter is available in open, fume tight, gas tight, and pressure tight configurations, and with full sanitary configuration to meet cGMP requirements. For hot-gas drying, segmented tray design makes it easy to use specific tray sections as hot gas drying zones. Hot gas can be air, nitrogen, or steam. Infrared drying can be...
Read More »
Beam Delivery Optics suit CO2 lasers.
Beam delivery optics, for 25 to 200 W lasers, are available with coatings for phase and polarization. Optics include lenses, mirrors, and beam combiners in sizes from 1/2 to 1 1/2 in. OD. Focal lengths range from 1 to 25 in. in 1/2 in. increments. Optics provide less than 0.2% total absorption. Applications includes Synrad lasers and low-power industrial marking, laser etching, and soldering...
Read More »
High-Power Magnifiers sit on desktop or light table.
Compact Clear Base Magnifiers, with magnifying powers of 9x, 12x, and 20x, have achromatic color-corrected lens which provides distortion free viewing and sharp image over entire field of view of lens. Adjustable lens-focusing collar adjusts focus for individual's vision or to view object that is not flat. Magnifiers may be used hands free. Clear base enables work surface to be viewed through...
Read More »
Brushes prepare surfaces for finishing.
Fiberglass brushes roughen surfaces to enhance adhesion of solder, paint, and epoxy. Other uses include cleaning electrical contacts, removing rust, removing epoxy and paint, and cleaning injection molds and foil stamping dies. Brushes are suitable for use in printed circuit board industry for PC board rework, including flux removal, edge connector cleaning, trace cleaning for soldering, and...
Read More »
Lockout Valves have integrated soft-start functions.
EZ Series Lockout Valves comply with OSHA Standard 29 CFR Part 1910, and prevent accidental actuation during servicing of air-operated equipment. Valves are offered in pipe sizes from 3/8 to 1 1/4 in., with BSPP and NPT threads, and CVs from 3.7 to 13.7. Exhaust ports range from 3/4 to 1 1/4 in. Construction consists of cast aluminum-alloy body, detented spool, and threaded exhaust port....
Read More »
Infrared Thermometer uses laser beam for aiming.
Model 61 is designed for measuring rotating, electrically live, dangerously hot, or hard-to-reach objects. When depressed and held down, laser illuminates and temperature readings are continuously updated and displayed on backlit LCD screen. Unit has single front button, optical resolution of 8:1, and protective holster.
Read More »
Label Maker uses MS Windows(R) operating system.
GlobalMark(TM) label maker produces full-color, industrial grade labels and signs in minutes. It provides on-screen templates and touch-screen menus for set-up and operation, and can produce signs and labels up to 4 in. wide and to any length. Print resolution is 300 dots per in., and XY axis plotter/cutter can be used for precision letter and symbol cutting. Three models are available: Color&Cut...
Read More »