Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Power Analyzer measures energy variables.
Model 1010 measures harmonics, voltage, frequency, crest factor, and performs power analyses. It checks energy consumption of electrical appliances, measures maximum and minimum energy demand, and makes harmonic analysis of power factor correction capacitors. It also analyzes variable-speed motor drives and solid-state lighting ballasts, makes efficiency measurements, measures inrush current when...
Read More »
Bevel Head provides cuts for 3 and 5 axis applications.
Waterjet Bevel Head is for use with Vision NT CNC Windows(R)-based cutting machine controller. It allows for contour or straightedge beveling in flat-sheet material at any angle from -90 to +90 deg A-axis and -360 to +360 deg C-axis rotation. Bevel head features 0.005 in. total TIR at nozzle tip, 0.1 deg accuracy per axis, and 0.05 total repeatability per axis.
Read More »
Battery Packs have on-board charging circuits.
Li-Ion Battery Packs provide 5 times the energy density of NiCad packs for comparable size, and can be made in cylindrical, prismatic, and coin cell configurations, with capacities ranging from 500 mA to 20 A. On-board circuitry gauges charge, temperature, and remaining run time. Options include flying leads, pressure contacts, and solder-, surface mount-, and quick-connect connectors. Battery...
Read More »
Low-Dropout Regulator powers processor cores.
MIC49150 1.5 A dual supply LDO is capable of output voltages down to 0.9 V and responds instantly to any abrupt change in load current. It supports input voltage as low as 1.4 V and features thermal shutdown, current limit protection, and ability to use ceramic output capacitors. Transient response is 10 MHz GBW and dropout is 500 mV at 1.5 A. Regulator is available in MSOP-8 and S-Pak packages....
Read More »
Crosspoint Switches operate up to 3 Gpbs from 2.5 V supply.
SY55854U 3Gbps single 2x2 CML switch, in 16-pin QSOP package, operates from supply voltage as low as 2.3 V. Output channel-to-channel skew is guaranteed to be less than 15 ps over temperature and voltage. SY55858U and SY55859L dual 2x2 CML switches come in 32-pin TQFP and 32-pin MLF packages, respectively. SY55858U includes flexible, 3-pin input stage. SY55859L operates up to 2.7 Gbps and...
Read More »
LDO Regulator provides standby power.
Low dropout regulator, in IttyBitty(TM) SOT-23-5 package, suits applications in portable and fixed systems and consume only 18 microA of quiescent current. Model MIC5233, with input voltage range of 2.3 to 36 V, supplies up to 100 mA of output current. Model MIC5235, with input voltage range of 2.3 to 24 V, supplies 150 mA. Applications include keep-alive circuits in battery or telecom systems,...
Read More »Prod Style Thermocouple connects to digital thermometers.
Model KSP-49 type K thermocouple, with round- or flat-pin connector, integrates with most commercially available digital thermometers. It has 12 in. long, chrome-plated, rigid arm with 5/8 in. dia cushioned, rubber handle. Flexible, stainless-steel armor protects against premature wire breakage. Spring-loaded, 1/4 in. solid prod tips absorb shock and can be sharpened or replaced. Applications...
Read More »Filters are available with optional large-tube body.
AFR Series design replaces multiple valves found in systems with single rotating diverter. Actuator design provides more power and torque than original AFR, and is rated for more rotations. Optional 6 in. tubes enable unit to address filtration at low retentions and high flows. They are suitable for flow capacity at low, flow-restricting retentions of less than 100 microns.
Read More »
Drill matches brazed drill precision.
CrownLoc(TM) allows users to drill different diameters using same drill body. It features precision-ground interface of interlocking V-grooves to ensure repeated positioning of each crown. Cutting edges are produced by injection-molding carbide substrate, producing homogenous tungsten carbide. Double coolant holes through each crown permit high volume of coolant to reach cutting edge. Crowns are...
Read More »
Software Library is used with C-Motion(TM) library.
Pathfinder Contouring Software Library enables engineers to develop complex s-curve and trapezoidal motion profiles using simple C++ function calls. It works with Navigator multi-axis or Pilot single-axis motion control chips for brushed, brushless, stepper, and microstepper applications. Pathfinder provides functions for performing circular interpolation, linear interopolation, and 1, 2, or...
Read More »