Maxim Integrated Products
Sunnyvale, CA 94086
Aug 10, 2009 Operating from 6-38 V supply, MAX9943 (single) and MAX9944 (dual) op amps consume 550 µA quiescent current per amplifier. They have 100 µV max input-offset voltage as well as 0.4 µV/°C offset drift and offer gain-bandwidth product of 2.4 MHz. Featuring 15 nV/SqrRtHz input-voltage noise density and 1 fA/SqrRtHz input-current noise density, MAX9945 operates from 4.75-38 V supply, consumes 400 µA quiescent current, and has gain-bandwidth product of 3 MHz.

National Semiconductor Corp.
Santa Clara, CA 95051-0695
Aug 10, 2009 Featuring supply voltage of 1.6-5.5 V and max supply current of 0.4 µA, PowerWise LPV521 extends battery life in portable equipment including wireless remote sensors, power-line monitoring, and micropower oxygen and gas sensors. Wide-input common-mode voltage range accepts input signals 100 mV beyond each rail, enabling direct connection to several sensor types. Housed in 5-pin SC-70 package, op amp includes EMI suppression filters and offers power-to-performance ratio of 65 µA/MHz.

L-Com, Inc.
North Andover, MA 01845
Jul 29, 2009 Covering frequency range of 750-2,700 MHz, SCW04N 4-way wireless splitter features 50 W power rating and is constructed from heavy duty aluminum. It is suited for 800 and 900 MHz cellular and ISM band operation, 1.8 and 1.9 GHz PCS cellular radio applications, as well as 2.3 GHz WCS Band, 2.36 GHz CDMA Band, and 2.4 GHz 802.11b, 802.11g, and 802.11n applications. Device is designed to be installed indoors or in weather-resistant enclosure.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jul 16, 2009 Optimized for 1-500 MHz operation, Model LTC6412 provides continuous gain adjustment from -14 to 17 dB. Third-order output intercept point is 35 dBm at 240 MHz across all gain settings. Device also achieves constant output noise level over entire gain range, with noise figure of 10 dB at max gain setting. Using negative gain slope mode, gain control slope is -32 dB/V at 140 MHz, with control range of 0.1-1.1 V. Housed in 4 x 4 mm QFN package, LTC6412 consumes 110 mA on 3.3 V supply.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Jun 26, 2009 Operating from 1.8-6.0 V, MCP605X/MCP606X/MCP607X series are trimmed in-package to enable low offset voltage (150 µV). Devices are unity-gain stable and operate over -40 to +125°C range. Each offers rail-to-rail input and output that promotes dynamic range. Respective Gain Bandwidth Product (GBWP) ratings for MCP605X, MCP606X, and MCP607X series are 385 kHz, 730 kHz, and 1.2 MHz, while quiescent current ratings are 30, 60, and 110 µA.

Newport Corp.
Irvine, CA 92606
Jun 24, 2009 Featuring optimized dual outputs for simultaneous high-energy and time-resolved experiments, Spectra-Physics® Unison(TM) amplifier system delivers femtosecond pulses at both terawatt-class intensities at 10 Hz frequency and mJ energies in kHz frequency regime. System also features pulse energy stability and TEM₀₀ spatial mode for high quality experimental results.

STMicroelectronics
GENEVA   Switzerland
Jun 16, 2009 Available in single, dual, or quad configurations, Series TSV61x, TSV62x, and TSV63x offer active current as low as 11 µA, 29 µA, and 60 µA, respectively. Units feature EMI rejection, ESD tolerance, and operation over extended temperature range of -40 to +125°C. Supplied in shutdown and non-shutdown versions, TSV62x and TSV63x provide 420 and 880 kHz gain-bandwidth-product, respectively, low input offset voltage down to 500 µV max, and input bias current of 1 pA.

Mahr Federal Inc.
Providence, RI 02905
Jun 15, 2009 Featuring dual input ports for single or differential ID or OD measurements, Series 830 includes dimensional-measuring model calibrated in both inch and metric units. Gage inputs can be used simultaneously with either normal or reversed polarity for differential measurement setups, and ±2 V analog output port is also provided. Portable or bench mountable unit provides minimum of 8 hr of operation using rechargeable batteries and also operates on 120 or 240 AC line voltage.

Oclaro
San Jose, CA 95134
Jun 15, 2009 New Focus(TM) TA-7600 series amplifier features tapered structure that maintains minimized power densities even after amplification. Capable of delivering over 1 W output power, unit offers fiber-coupled input which allows for simplified alignment. Constant power mode, monitor for input power, and front- and back-end isolation features are also included. Unit is compatible with New Focus Vortex(TM) II Precision Laser and with 767, 780, 795, and 852 wavelengths.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
Jun 11, 2009 Based upon GaAs pseudomorphic high electron mobility transistor technology, Models SUF-1033, -5033, and -8533 offer multiple high-frequency gain blocks featuring various gain levels across bandwidth. Each packaged broadband amplifier also features single supply voltage, low gain variation vs. temperature, and 50 W I/O match. With frequency ranges of DC-18 GHz, 0.1-4 GHz, and DC-12 GHz, units are suited for commercial, military, and space applications.

HBM, Inc.
Marlborough, MA 01752 3014
Jun 09, 2009 CMD600 digital charge amplifier enables mechanical quantities, such as force, pressure, or torque, in range of 50-600,000 pC (pico coulombs) to be measured with piezoelectric sensors and made available either as analog voltage signals (0-10 V) or in digital form via its integrated Ethernet interface. All signal inputs and outputs are electrically isolated, and IP65 rated device utilizes TEDS so that any connected system automatically reads sensor and amplifier data.

HBM, Inc.
Marlborough, MA 01752 3014
Jun 08, 2009 Supporting Advanced Plug and Measure technology that allows applicable transducers to be automatically recognized by amplifier, MX410 has 4 individually configurable inputs, each electrically isolated and each with analog output. Digitalization is implemented with 24 bit resolution. Module is suitable for SG transducers in half or full bridge circuits, inductive half or full bridges, current-fed piezoelectric sensors (IEPE), and analog voltage signals (±10 V).

HBM, Inc.
Marlborough, MA 01752 3014
Jun 08, 2009 With sampling rates of up to 96,000 signals/sec and bandwidths of up to 38 kHz, MX460 can acquire torque from HBM torque transducers, PWM signals, and speeds. It measures digital signals with precision of up to 1 MHz, while all input channels are electrically isolated and can be individually configured. Device supports integrated Transducer Electronic Data Sheet (TEDS) technology and features Ethernet and Firewire interfaces for data transmission.

Trek, Inc.
Medina, NY 14103 9710
Jun 03, 2009 Suited for piezoelectrics, electro-optics, and MEMS applications, Model PZD350A provides large signal bandwidth of 250 kHz and small signal bandwidth greater than 350 kHz. It offers high speed and precise control of DC or peak AC output voltages in programmable ranges of 0 to ±350 V with output current range of 0 to ±200 mA (bipolar model) and 0 to ±700 V with ±100 mA (unipolar model). CE marked unit provides full four-quadrant, class AB, all-solid-state output stages.

Cissoid
Mont Saint Guibert 1435  Belgium
Jun 02, 2009 Packaged in plastic SOIC16W, operational amplifier CMT-OPA sustains temperature range from -55 to +175°C, suited for high temperature applications such as automotive, industrial, oil and gas, and aeronautics markets. It can be powered from single or symmetric supply voltages ranging from 4.5-20 V. Amplifier is built on latch-up free CMOS process, has gain above 90 dB, and consumes current of 575 µA/channel when supplied at 20 V.

PREMA Semiconductor GmbH
Mainz D-55129  Germany
Jun 01, 2009 Suited for use in automatic test environments, PR2201 has low typical input bias current of 5 pA and input offset voltage of typical ±2 mV, which can be further reduced by external trimming. With high differential input voltage of up to 60 V and low quiescent current of 500 µA, unit features gain bandwidth of up to 1 MHz and slew rate of more than 1 V/µs, suited for designing fast control circuits. Optional component PR2202 comes with 2 integrated op-amps.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
May 26, 2009 To minimize drift over time and temperature, 50 MHz MCP65X Series includes mCal on-chip, one-shot calibration circuit that calibrates offset voltage at power-up using internal power on-reset detector, or based upon state of external pin. Units feature rail-to-rail output with output drive current of 95 mA. Housed in 8-pin SOIC, 3 x 3 mm DFN, or 10-pin MSOP package, op amps are suited for microphone preamplifiers, H-bridge drivers, barcode scanners, and ultrasound equipment.

Maxon Precision Motors
Fall River, MA 02720
May 20, 2009 Miniaturized DEC Module 24/2 is digital 1-quadrant amplifier with speed controller for brushless EC motors with Hall Sensors up to 48 W and surface area measuring less than 5 cm². It has supply voltage range of 8-24 Vdc (alternatively 5 Vdc) and continuous output current of 2 A. Designed for maximum motor speed of 80,000 rpm, amplifier has 2 connector arrays arranged in 2.54 mm pattern for supporting connectivity and integration into OEM-side motherboard.

Advanced Analogic Technologies Inc.
Sunnyvale, CA 94085
May 12, 2009 Model AAT5101 2.5 W Class D audio amplifier operates from 2.1-5.5 V supply voltage and delivers up to 92% efficiency and offers 0.06 µA shutdown current and 1.35 mA quiescent current. It features low noise, filterless PWM architecture and outputs 1.35 W with 8 W load and THD+N of less than 1% and 2.5 W with 4 W load and THD+N below 10%. Operating across -40 to +85°C temperature range, it features thermal and short circuit protection circuitry with self-recovery.

Pepperl+Fuchs
Twinsburg, OH 44087
May 01, 2009 Featuring multiple detection modes, selectable timing functions, and remote teach, SU18 and SU19 Photoelectric Fiber Optic Amplifiers each deliver NPN light on, NPN dark on, PNP light on, or PNP dark on output options. Locking lever secures fiber optic cable to sensor, while press-and-click feature facilitates DIN rail mounting and removal. Series SU18 is available in pushbutton teach or potentiometer adjustable models, while SU19 Series can be gang-mounted with up to 18 amplifiers.