Electronic Amplifiers

IMS 2017 Technical Presentation  Multi-use Interoperable RF Amplifier" By Paulo Correa, Empower RF Systems Chief Technical Officer
Electronic Amplifiers

IMS 2017 Technical Presentation Multi-use Interoperable RF Amplifier" By Paulo Correa, Empower RF Systems Chief Technical Officer

On Tuesday June 6th Empower RF’s CTO , Paulo Correa, will be presenting this topic to an audience of IMS attendees at the Exhibitor Workshop 1pm to 3pm, Room 318/319 of the Hawai’i Convention Center. Abstract The RF system amplifier has not evolved in any significant way since the inclusion of the microcontroller twenty years ago. That’s a remarkable statement given the advancements seen in...

Read More »
IMS 2017 Technical Presentation “Multi-use Interoperable RF Amplifier” By Paulo Correa, Empower RF Systems Chief Technical Officer
Electronic Amplifiers

IMS 2017 Technical Presentation “Multi-use Interoperable RF Amplifier” By Paulo Correa, Empower RF Systems Chief Technical Officer

On Tuesday June 6th Empower RF’s CTO , Paulo Correa, will be presenting this topic to an audience of IMS attendees at the Exhibitor Workshop 1pm to 3pm, Room 318/319 of the Hawai’i Convention Center. Abstract The RF system amplifier has not evolved in any significant way since the inclusion of the microcontroller twenty years ago. That’s a remarkable statement given the advancements seen in...

Read More »
Electronic Amplifiers

Housed in hermetic 1.75 x 1.62 x 0.525 in. module with replaceable SMA connectors, HMC-C582 GaAs MMIC pHEMT Power Amplifier is operated between 0.01 GHz and 20 GHz. Providing 24 dB of gain, up to 36 dBm output IP3 and 26 dBm output power at 1 dB gain compression, unit’s inputs and outputs are matched to 50 Ω. Suitable for electronic warfare, electronic countermeasures, radar and fiber optic...

Read More »
Electronic Amplifiers

Housed in hermetic 1.75 x 1.62 x 0.525 in. module with replaceable SMA connectors, HMC-C582 GaAs MMIC pHEMT Power Amplifier is operated between 0.01 GHz and 20 GHz. Providing 24 dB of gain, up to 36 dBm output IP3 and 26 dBm output power at 1 dB gain compression, unit’s inputs and outputs are matched to 50 Ω. Suitable for electronic warfare, electronic countermeasures, radar and fiber optic...

Read More »
Electronic Amplifiers

High-Power MMIC Amplifiers are fabricated using GaAs pHEMT process.

Suitable for test and measurement, EW, ECM and radar applications, High-Power MMIC Amplifiers are available in MAAP-011247-DIE (2 W) and MAAP-011248-DIE (1 W) models with 13.5 and 14 dB gain respectively. Operating from DC to 22 GHz, units are matched to 50 Ω across the band. Housed in 2.99 x 1.5 x 0.1 mm package, MAAP-011247-DIE provides 500 mA bias current at 15 V whereas MAAP-011248-DIE with...

Read More »
Electronic Amplifiers

High-Power MMIC Amplifiers are fabricated using GaAs pHEMT process.

Suitable for test and measurement, EW, ECM and radar applications, High-Power MMIC Amplifiers are available in MAAP-011247-DIE (2 W) and MAAP-011248-DIE (1 W) models with 13.5 and 14 dB gain respectively. Operating from DC to 22 GHz, units are matched to 50 Ω across the band. Housed in 2.99 x 1.5 x 0.1 mm package, MAAP-011247-DIE provides 500 mA bias current at 15 V whereas MAAP-011248-DIE with...

Read More »
Low Phase Noise Amplifiers meet MIL-STD-883 standards.
Electronic Amplifiers

Low Phase Noise Amplifiers meet MIL-STD-883 standards.

Available in models ranging from 1.5 to 18 GHz frequency with -180 dBc/Hz offset residual phase noise at 10 KHz, Low Phase Noise Amplifiers are suitable for electronic warfare, VSAT and radar applications. Offering 9 to 14 dB of small signal gain with 5.5 dB noise figure, units are housed in gold-over-nickel-plated Kovar™ metal drop-in packages. Having Psat levels from +16 to +25 dBm range,...

Read More »
Low Phase Noise Amplifiers meet MIL-STD-883 standards.
Electronic Amplifiers

Low Phase Noise Amplifiers meet MIL-STD-883 standards.

Available in models ranging from 1.5 to 18 GHz frequency with -180 dBc/Hz offset residual phase noise at 10 KHz, Low Phase Noise Amplifiers are suitable for electronic warfare, VSAT and radar applications. Offering 9 to 14 dB of small signal gain with 5.5 dB noise figure, units are housed in gold-over-nickel-plated Kovar™ metal drop-in packages. Having Psat levels from +16 to +25 dBm range,...

Read More »
Gallium Nitride Power Amplifiers feature 2 GHz-6 GHz operating frequency.
Electronic Amplifiers

Gallium Nitride Power Amplifiers feature 2 GHz-6 GHz operating frequency.

Available in HMC7885 and HMC7748 models, Gallium Nitride Power Amplifiers are suitable for test and measurement, communications, military/aerospace surveillance and radar applications. Housed in hermetic flange-mount package, HMC7885 provides 21 dB of small-signal gain and 45 dBm of saturated RF-output power and draws 2.2 A from 28-V dc supply. Offering 60dB of small-signal gain, HMC7748 draws...

Read More »
Gallium Nitride Power Amplifiers feature 2 GHz-6 GHz operating frequency.
Electronic Amplifiers

Gallium Nitride Power Amplifiers feature 2 GHz-6 GHz operating frequency.

Available in HMC7885 and HMC7748 models, Gallium Nitride Power Amplifiers are suitable for test and measurement, communications, military/aerospace surveillance and radar applications. Housed in hermetic flange-mount package, HMC7885 provides 21 dB of small-signal gain and 45 dBm of saturated RF-output power and draws 2.2 A from 28-V dc supply. Offering 60dB of small-signal gain, HMC7748 draws...

Read More »

All Topics