Electronic Amplifiers

Electronic Amplifiers

Ryder EMS to Exhibit at Hong Kong Electronics Fair Spring Edition 2015

Ryder Industries Ltd, the Swiss-owned EMS provider with manufacturing facilities in China, today announced that it will exhibit at the Hong Kong Electronics Fair (Spring Edition) in booth #5C - C02 in Hall 5, scheduled to take place April 13-16, 2015 at the Hong Kong Convention and Exhibition Centre, hosted by the Hong Kong Trade Development Council. Ryder EMS will showcase its New Product...

Read More »
Electronic Amplifiers

Rohde & Schwarz to Showcase Its Comprehensive Portfolio of EMC Test Solutions in Stuttgart

Rohde Schwarz will again demonstrate its expertise in electromagnetic compatibility (EMC) measurements at the EMV 2015 international trade fair (booth 328, hall C2) in Stuttgart. Highlights will include compliance tests in the 5 GHz band, tried and tested EMC software with enhanced functionality and broadband amplifiers with expanded frequency ranges. Munich,Â- – Rohde Schwarz, the global...

Read More »
Traveling Wave Tube Amplifiers suit uplink applications.
Electronic Amplifiers

Traveling Wave Tube Amplifiers suit uplink applications.

Based on SuperPower technology, XTD-2000KHE Ku-band TWTA provides 750 W of linear power in compact, rugged package weighing 92 lb and drawing less than 3,200 W of prime power. XTD-1500DBSHE DBS-band TWTA provides 560 W of linear power for direct-to-home applications in same package and draws only 2,500 W of prime power. Designed for SATCOM applications, both are available as outdoor antenna-mount...

Read More »
Broadband RF Amplifiers operate from 0.5-40 GHz.
Electronic Amplifiers

Broadband RF Amplifiers operate from 0.5-40 GHz.

Based on GaAs PHEMPT semiconductor technology with 50 Ω hybrid MIC circuits enclosed in environmentally sealed metal packages, RF Broadband Amplifiers offer noise figures from 2.5–6 dB across entire frequency range. Devices have gain levels from 20–48 dB, gain flatness as low as ±0.5 dB, and power output from 20 mW to 2 W. Equipped with stainless steel SMA or 2.92 mm connectors,...

Read More »
Electronic Amplifiers

Maxim Integrated Demonstrates Highly Integrated Analog Solutions at Embedded World 2015

Maxim showcases solutions for industrial power, industrial interface, and the signal chain. MUNICH - Maxim Integrated Products, Inc. (NASDAQ: MXIM) will demonstrate highly integrated analog solutions for embedded applications at the Embedded World 2015 Exhibition and Conference in Nuremberg, Germany (February 24-26, 2015). In three demo areas for Industrial Power, Industrial Interface, and Signal...

Read More »
Electronic Amplifiers

US Government Agency Selects ETL's Compact Vulcan Matrix System and Alto Line Amplifier

Virginia, USA.Â- – A large US Government Agency has selected ETL Systems, a global designer and manufacturer of RF signal distribution equipment for satellite communications, to provide RF equipment. In this case, the customer required a 256 x 128 matrix system, so two Vulcan matrices were used in conjunction with combiners to design the overall system which will be operated in Australia....

Read More »
OFS to Present Five Technical Papers at BiOS / Photonics West Conferences
Electronic Amplifiers

OFS to Present Five Technical Papers at BiOS / Photonics West Conferences

Norcross, GeorgiaÂ- – OFS, a leading designer, manufacturer, and supplier of innovative fiber optic products will present five papers, one of which is an invited paper, at SPIE's BiOS and Photonics West Conferences located at the Moscone Center in San Francisco, California from 7 through 12 February 2015. The invited paper will be presented Tuesday, 10 February and is entitled New...

Read More »
New Marposs Electronic Gauge Amplifiers to Be Featured at Eastec 2015.
Electronic Amplifiers

New Marposs Electronic Gauge Amplifiers to Be Featured at Eastec 2015.

Auburn Hills, Michigan — Marposs Corp. will present its new generation P3up and P7up electronic gauge amplifiers at EASTEC in booth #3008. The devices are intended for connecting to Marposs measuring heads, and represent an economical, practical and reliable solution for in-process work-piece monitoring on grinding machines. The P3up is ideal for simple in-process gauging applications, while...

Read More »
1 to 3 GHz High Power Amplifier - Live Demo at EMC & SI 2015
Electronic Amplifiers

1 to 3 GHz High Power Amplifier - Live Demo at EMC & SI 2015

Empower RF Systems is once again conducting live demonstrations of broadband, high power amplifiers with compelling performance, industry leading small size, and user interface / functionality that dares to challenge legacy products offered in the market. Next appearing at EMC & SI 2015 in Santa Clara, we will be showcasing our 1 to 3 GHz, 1 kW HPA in a 5U chassisÂ-  -  an...

Read More »
Broadband Low Noise Amplifiers range from 30 MHz to 40 GHz.
Electronic Amplifiers

Broadband Low Noise Amplifiers range from 30 MHz to 40 GHz.

With noise figure levels from 2.5–3 dB typ across entire band, ultra-broadband and millimeter wave low noise amplifiers (LNAs) include 17 unconditionally stable models covering multi-octave bandwidths with flat gain response and GaAs PHEMT semiconductor technology. Features include 50Â- Ω hybrid MIC circuits enclosed in environmentally sealed metal packages with nickel or gold plating,...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics