Electronic Amplifiers

Low Noise Amplifier operates from 10-14 GHz.
Electronic Amplifiers

Low Noise Amplifier operates from 10-14 GHz.

Housed in leadless 3 x 3 mm plastic surface-mount package, Model CMD189P3 delivers greater than 19 dB of gain with corresponding output 1 dB compression point of +4 dBm and noise figure of 1.4 dB. Broadband MMIC device has 50 Ω matched design, which eliminates need for external DC blocks and RF port matching. Applications include point-to-point and point-to-multipoint radios, military end-use,...

Read More »
Electronic Amplifiers

Flat Panel Buffer Amplifier targets tablets and notebooks.

Designed to addÂ- two additional power supply voltages available in panel electronics, Model iML2911 employs sensing circuitry for common voltage (VCOM) output load requirement and automatically switches between multiple supply voltage combinations. This saves energy for both still and dynamic display images without affecting quality. Housed in 8-pin TDFN package and 9-ball CSP, device...

Read More »
Portable RF Amplifiers withstand harsh environments.
Electronic Amplifiers

Portable RF Amplifiers withstand harsh environments.

Comprising 4 models covering multi-octave bandwidths from 1–40 GHz, Ultra-broadband Portable Bench Top RF Amplifiers offer up to 60 dB small signal gain, low noise figure of 5 dB, and output P1dB compression power ranges from +10 to +22 dBm. Units have internal AC voltage power supply of 115–120 Vac at 60 Hz. Operating from -40 to +85°C, 20 GHz modules use SMA female connectors, while...

Read More »
Pasternack Introduces Brand New USB Controlled Microwave and Millimeter Wave Components
Electronic Amplifiers

Pasternack Introduces Brand New USB Controlled Microwave and Millimeter Wave Components

USB Controlled RF Amplifiers, Attenuators and PIN Diode Switches Up to 40 GHz Unveiled by Pasternack Irvine, CAÂ- – Pasternack, a leading manufacturer and supplier of RF, microwave and millimeter wave products, releases their brand new lines of USB controlled microwave and millimeter wave components which includes amplifiers, attenuators and PIN diode switches. The new components from...

Read More »
Test System meets immunity testing requirements.
Electronic Amplifiers

Test System meets immunity testing requirements.

Combining signal generator and integrated power amplifier, Model NSG 4060 meets requirements for immunity testing to low frequency disturbances in frequency range of 15 Hz to 150 kHz. Disturbances are coupled onto cables in common mode (IEC/EN 61000-4-16) with continuous levels up to 33 V or differential mode (IEC/EN 61000-4-19) with levels up to 22 V/4.5 A. System includes user port for 4 TTL...

Read More »
High Power Amplifier integrates power detector.
Electronic Amplifiers

High Power Amplifier integrates power detector.

Designed specifically for 18 GHz wireless backhaul applications, Model MAAP-011145 covers 17.6–19.75 GHz frequency band and delivers over 2 W output power at 1 dB compression point. Device provides 25 dB small signal gain, OIP3 of 43 dBm, noise figure of 7 dB, and 34.5 dBm of saturated output power. Housed in 7 mm, lead-free cavity package, amplifier features temperature compensated integrated...

Read More »
Electronic Amplifiers

Digital Radio Extender does not require infrastructure change.

Employing digital technology and using IP connection, eVerge™ EVX-Link can connect digital mobile radios (DMRs) and be installed anywhere from high-rise building or on large campus to geographically separate sites. Solution works with any digital mobile radio platform, does not require users to replace existing infrastructure or employ repeater, and improves coverage by linking up to 30 areas....

Read More »
Electronic Amplifiers

Transimpedance Amplifier suits coherent receiver applications.

With power dissipation of 300 mW per channel, Model MATA-003806Â- is suited for next generation of micro Integrated Coherent Receivers for metro applications at 100 Gbps and beyond. Dual-channel linear TIA has transimpedance gain which can be adjusted from 100 Ω up to 10 KΩ with manual and automatic gain control modes of operation. Input and output peak detectors...

Read More »
Electronic Amplifiers

Comtech Xicom Technology Receives First Annual Impact Award for New SuperPower(TM) SATCOM Uplink Amplifiers from SatNews Publishers

SANTA CLARA, CALIF.Â-  – Comtech Xicom Technology, Inc., the leader in high power amplifier products for satellite communications (SATCOM), received the first Annual Impact Award from SatNews Publishers during Satellite2015, for their introduction of a new line of SuperPower™Ã‚  traveling wave tube amplifiers (TWTAs) that can double available TWTA output and provide direct...

Read More »
Isolated Gate Driver suits high power density applications.
Electronic Amplifiers

Isolated Gate Driver suits high power density applications.

Aimed at high-density power converters, motor drives, and actuators based on SiC transistors, power MOSFETs, and IGBTs, HADES® v2 chipset uses 3 ICs: HADES2P on primary side, HADES2S on secondary, and quad-diode ELARA. Unit includes all functions to drive gates of power switches in isolated, high voltage half bridge. HADES® is available in hermetic packages for extreme temperature...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics