Nickel Flux-Cored Wires offer arc stability.
Type A-T1, 625-T1, 82-T1, 182-T1 and HX-T1 flux-cored wires meet chemistry requirements of AWS EniCrFe-2, ERNiCrMo-3, ERNiCr-3, and EniCrMo-2. Operational characteristics make them suitable for similar and dissimilar joining applications, as well as many cladding applications. Wires offer arc stability even when welding in vertical position.
Read More »
Welding Wire suits submerged arc-welding applications.
Low alloy steel StoodyÃ-® ThermalCladÃ-® Roll Build 3 produces deposit of unlimited thickness. Sizes include 3/32 in. diameter with amperage range of 300-400, voltage range of 25-29, and wire extension range from 1 to 1Ã-¼ in.; 1/8 in. diameter for 400-500 A, 26-30 V, with wire extension of 1Ã-¼ to 1Ã-½ in.; and 5/32 in. diameter for 450-600 A, 28-32 V, with wire extension of...
Read More »
Open Arc Welding Wire withstands high stress applications.
StoodyÃ-® 600 offers abrasion and impact resistance and produces titanium carbide bearing deposit. Wire is available in 7/64, 3/32, and 1/16 in. dia. Wire with 7/16 in. dia has 45-550 amperage (A) range, 30-32 voltage (V) range, and 1Ã-½ in. wire extension. Wire with 3/32 in. dia has 400-500 A range, 28-30 V range, and 1Ã-½ in. wire extension. With 1/16 in. dia, wire has 225-275 A...
Read More »
Flux-Cored Wires resist elements and improve conductivity.
Copper-covered Thermal Arc-® SF-1 and SF-1A (E71-T1) flux-cored welding wires prevent moisture absorption and rust. They have no seams, flux voids, or strip seams. Sizes range from .045 to .052 in. diameter. SF-1 is welded in CO2 shielding gas while SF-1A is designed for 75 Argon-25CO2. Both wires feature low spatter and easily removed slag cover.
Read More »
Choosing the Right Type of Chemical Gauge
This white paper provides an in-depth overview into choosing the right type of chemical gauge.
Read More »
Metal-Cored Wire produces low spatter.
MC-6 mild-steel, metal-cored electrode is suited for low-voltage operation and out-of-position applications. It offers stable arc for consistent, defect-free welds and high tolerance to gaps. It achieves up to 97% deposition efficiency. Because electrode is deoxidized, it reduces prep-time. Applications include railcar, automotive parts, agricultural equipment, heavy equipment, structural...
Read More »
Welding Wire welds through mill scale, dirt, and rust.
Thermal Arc TR S-6 copper-coated wire contains high levels of manganese and silicon and is designed for GMAW welding under CO2 or AC/CO2 shielding gases. It produces low spatter level, which minimizes post-weld clean up. Wire diameters range from .024 to .045. Applications include sheet metal work, tanks and pipe work, and automotive and truck body work.
Read More »
Welding Wire can be used on under-carriage components.
Thermaclad 42 submerged arc-welding wire offers temper resistance as well as resistance to metal-to-metal frictional wear and cold deformation. It is 1/8 in. in diameter, with DC amperage range of 400 to 500 A and voltage range of 27 to 29 V. Thermaclad 42 can be used for build-up and hardfacing on rollers and idlers, and is also suitable for crane wheel and mine-car wheel applications.
Read More »
Die Wires for repairing metalworking components.
ToolTherm 225FC-G flux cored, gas shielded die wires have tensile strength of 140,000 psi, making them suitable for applications including forging hammers, die impressions, shafts, and rams. Wires are available in 3/32 and 1/8 in. dia; 3/32 in. wire has current range of 350-500 A and wire extension of Ã-¾ to 1Ã-¼ in.; 1/8 in. wire has current range of 500-700 A with wire extension of 1 to...
Read More »
Tungsten Electrode starts arcs reliably.
TriMix(TM) multi-dopant blend, non-radioactive tungsten is made from three rare earth tungstens. Mix provides reliable arc starting, especially after numerous prior ignitions; reduced burn-off rate; prolonged service life; and high quality arc.
Read More »
Wire welds in virtually any position.
All position (AP) 2209T-1 gas shielded flux cored wire can be welded with either 100% CO2 or Argon/CO2 gas mixtures. Wire features spray like arc transfer and slag removal. AP 2209 wire is available in .045 and 1/16 in. dia. Former has 130 to 220 amperage range and 24 to 27 voltage range, while latter offers 170 to 300 amperage range and 25 to 28 voltage range. Composition is balanced to achieve...
Read More »
Solder Redefined
Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.
Read More »
