Welding Rods, Wire and Electrodes

Cobar's Advanced Technologies Featured in the APEX Hand Solder Competition
Dispensers

Cobar's Advanced Technologies Featured in the APEX Hand Solder Competition

The Balver Zinn/Cobar Group announces that its SN100C Wire Solder and Cobrush flux applicator were demonstrated at the first Hand Solder Competition at the recently held IPC APEX EXPO in San Diego. During the two-day hand soldering competition, numerous companies competed to build a functional electronics assembly in 30 minutes. Assemblies were judged on soldering in accordance with IPC-A-610E...

Read More »
Gas-Shielded Flux-Cored Wire offers low hydrogen weld deposits.
Welding Rods, Wire and Electrodes

Gas-Shielded Flux-Cored Wire offers low hydrogen weld deposits.

Designed for optimal weld quality on offshore drilling rig applications and jack-up rig fabrication, FabCO® 712M welding wire has less than 4 ml diffusible hydrogen per 100 g of weldment. This decreases chance of underbead cracking and can lessen requisite preheating, while degree of moisture pickup minimizes chance of hydrogen entering weld after exposure to atmosphere. Supplied in 0.045...

Read More »
Miscellaneous Protectors

Linde Canada to Showcase Productivity Benefits of Welding Equipment and Gases at FABTECH Canada

Mississauga, Canada- Metal fabricators attending FABTECH Canada looking for ways to increase productivity without sacrificing product quality or safety in the workplace are invited to visit with Linde Canada welding experts who will be showcasing the company's extensive line of welding gases and equipment and safety products at the show. Linde Canada Limited is an affiliate of Linde North...

Read More »
Tungsten Electrodes offer optimized arc starts and stability.
Welding Rods, Wire and Electrodes

Tungsten Electrodes offer optimized arc starts and stability.

Available in 7 in. lengths and 5 diameters of 0.040, 1/16, 3/32, 1/8, and 5/32 in., Tungsten Electrodes come in 2% lanthanated and zirconiated versions. Two percent lanthanated electrodes, providing substitute for 2% thoriated tungsten electrodes, offer minimized tip erosion. Zirconiated tungsten electrodes resist spitting in high current applications, minimizing opportunity for contamination....

Read More »
Miscellaneous Metals

Hobart Brothers Offers Filler Metals for Demand Critical Seismic Applications

TROY, Ohio - Hobart Brothers has announced that it offers 16 metal-cored and flux-cored (gas- and self-shielded) wires that meet the AWS D1.8/D1.8M, Structural Welding Code-Seismic Supplement for Demand Critical welds in seismic moment frame welded connections. These filler metals have all been three-lot tested in accordance with AWS D1.8/D1.8M:2009 testing requirements and meet the requirements...

Read More »
Welding Rods, Wire and Electrodes

Metal-Cored Wire Excels on Robotic Welding Applications, Improves Productivity

TROY, Ohio - To improve productivity, particularly on robotic or automated welding applications, Hobart Brothers offers its Hobart® FabCOR® 86R gas-shielded metal-cored wire. The wire operates well on both constant voltage (CV) and pulsed welding power sources, and is good for welding non-alloyed and fine grain steels, rail cars, storage vessels, steel structures and in heavy...

Read More »
New Hardsurfacing Electrode for Earthmoving and Mining Applications
Welding Rods, Wire and Electrodes

New Hardsurfacing Electrode for Earthmoving and Mining Applications

Fort Loramie, OH - Select-Arc, Inc. has introduced a metal-to-metal wear hardsurfacing electrode that yields a low alloy, martensitic steel of mid-range hardness. SelectWear 42 is a medium alloy martensitic steel wire that offers very good metal-to-metal wear resistance. It has the capability of welding crack-free multiple layers. This electrode is utilized for welding applications such as...

Read More »
Self-Shielded, Flux-Cored Wire suits offshore welding.
Welding Rods, Wire and Electrodes

Self-Shielded, Flux-Cored Wire suits offshore welding.

Designed for welding in narrow TKY joints and poor fit-up conditions, Innershield® NR-440Ni2 features optimal toe wash-in and is capable of delivering flat bead face when used in vertical-up or vertical-down welding applications. Wire meets H8 diffusible hydrogen requirements over range of humidity levels. Available in 5/64 in. diameter on 14 lb coils, product is hermetically sealed in...

Read More »
Martensitic Electrodes weld 410 stainless steel.
Electrodes

Martensitic Electrodes weld 410 stainless steel.

Delivering flat, well washed beads with minimal weaving, Select 410-AP all position wire welds straight 410 SS while providing corrosion and oxidation resistance up to 1,200°F. Select 410NiMo, featuring nominal weld metal composition of 12% chromium, 4.5% nickel, 0.6% molybdenum, and max carbon content of 0.06%, delivers smooth stable arc with low spatter residue and well washed beads. Both...

Read More »
Stainless Steel Electrodes produce little or no spatter.
Electrodes

Stainless Steel Electrodes produce little or no spatter.

Available in .045 and 1/16 in. diameters, SelectAlloy 16-8-2 Electrodes are composed of 15.5% chromium, 8.5% nickel, and 1.5% molybdenum. Flux cored SelectAlloy 16-8-2-AP, designed to weld in all positions, delivers flat, well washed beads, while metal cored SelectAlloy 16-8-2-C wire provides smooth, spray arc transfer and produces little or no slag. Both gas-shielded electrodes are suitable for...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers