Welding Rods, Wire and Electrodes

Victor Technologies to Exhibit Its Most Advanced Plasma Cutting, Gas Equipment, and Welding Solutions at FABTECH 2013
AC to DC Power Supplies

Victor Technologies to Exhibit Its Most Advanced Plasma Cutting, Gas Equipment, and Welding Solutions at FABTECH 2013

Products include the Victor® Thermal Dynamics® Ultra-Cut® XT series of power sources and CUTMASTER® series of hand-held plasma cutters; Victor® 400 Series oxy-fuel torch; Tweco® Switchable Magnetic Products, Tweco Classic MIG gun series and Fabricator® 141i 3-in-1 welder; and Stoody® hardfacing and hardbanding wires for oil and gas exploration. ST....

Read More »
Material Handling Equipment

Indium Corporation Soldering Products Meet New IPC J-STD004B

Indium Corporation introduces a full line of soldering products that satisfy IPC's J-STD004B. The IPC's new 004B has stricter requirements for measuring halogens and electromigration risk. Indium Corporation's full line of PCB assembly products were specifically designed to meet these new international standards, which help to improve both first pass yields and long-term reliability. Users'...

Read More »
Flux Cored Electrode suits stress-relieved applications.
Welding Rods, Wire and Electrodes

Flux Cored Electrode suits stress-relieved applications.

Delivering smooth, stable arc, Select 7000-SR is designed for welding carbon and certain low alloy steels where optimal mechanical properties are required in both as-welded and stress-relieved conditions. Gas-shielded, flux cored, all-position electrode has low spatter emission and fast freezing slag. Available in .045, .052, and 1/16 in. diameters, Select 7000-SR is suitable for welding vessels,...

Read More »
Low-Alloy Cellulosic Electrode suits root pass welding.
Welding Rods, Wire and Electrodes

Low-Alloy Cellulosic Electrode suits root pass welding.

Available in 4.0 mm, 3/16 in., and 5.0 mm dia, Pipeliner® Arc 80 is designed for root pass welding up to X80-grade pipe as well as fill and cap pass welding for X70-grade pipe. Low-alloy stick electrode, classified as E8010-G and E8010-P1 per AWS, fosters productivity in vertical down as well as out-of-position pipe welding and offers deep penetration. Q2 Lot® control shows actual...

Read More »
Gas-Shielded Flux-Cored Wire improves comfort, productivity.
Welding Rods, Wire and Electrodes

Gas-Shielded Flux-Cored Wire improves comfort, productivity.

Designed for single- and multi-pass welding, Hobart® FabCO® 70XHP can be used in flat and horizontal position with either 100% CO2 or 75% argon, 25% CO2 shielding gas mixture. Fume generation rates help improve operator comfort, and deposition rates increase productivity. Available in 1/16, 5/64, and 3/32 in. dia, wire offers tensile strengths from 78,000–85,000 psi. Charpy V-Notch...

Read More »
Simulators

Lincoln Electric to Address Benefits of Classroom Virtual Simulation on Aug. 8 at Alabama Technical-Education Conference

Presentation to focus on how classrooms of the future will transform and enrich learning experiences via multi-media platforms, and how welding simulation is doing just that today ClevelandÂ- - The progression of technology has long been studied in classrooms, but as technology evolves it is changing the classroom learning environment itself. How that evolution is happening is the subject of...

Read More »
Filler Metals address range of application requirements.
Electric Wire

Filler Metals address range of application requirements.

Hobart® FabCOR® F6 gas-shielded metal-cored wire provides deposition rates and travel speeds that help increase productivity on single-pass, flat, and horizontal welding applications. Due to formulation of flux fill, Hobart Element™ gas-shielded flux-cored wires achieve low manganese levels and offer consistent arc stability and low spatter. MAXAL® 4943 aluminum wire and TIG...

Read More »
Nickel Alloy Electrode withstands rigorous environments.
Welding Rods, Wire and Electrodes

Nickel Alloy Electrode withstands rigorous environments.

Designed to tackle critical welding applications in demanding environments, SelectAlloy 182-AP produces uniform, well washed beads with minimal weaving, low spatter, and optimized slag peeling. Gas-shielded, flux cored, all position wire offers resistance to hot cracking, corrosion, and oxidation. Available in .045 and 1/16 in. diameters, ENiCrFe-3 class electrode is suitable for welding in...

Read More »
Flux-Cored Wire creates low-hydrogen welds in pipelines.
Welding Rods, Wire and Electrodes

Flux-Cored Wire creates low-hydrogen welds in pipelines.

Designed for overmatch welding on API 5L Grade X80 steel pipelines, Fabshield® X90 ensures welds remain ductile and resist cracking with low-temperature impacts. Diffusible hydrogen designation of 6.2 mL/100 g of weldment further minimizes chance of cracking. Available in 5/64 in. diameter, wire operates on DCEN, requires no shielding gas, and features fast-freezing slag for consistent...

Read More »
Electric Wire

Now Supplying Solders/Wire, Babbitt Alloys, and Casting Alloys Release

Mars Metal is now supplying a wide range of wire (solid and flux cored). Our inventory includes: • Pure lead wire • Pure tin wire • Lead-free wire • Silver bearing wire Our specialized wire solder is available in over 50 types and sizes in Â-¼ lb, ½ lb, 1lb, 5 lb, 20 lb, and 25lb spools by case lots. Also available upon request are 250 lb bulk fibre drums. Mars Metal also...

Read More »

All Topics