Crestron DMPS3-4K Presentation Systems Receive Joint Interoperability Test Command (JITC) Certification
Controls and Controllers

Crestron DMPS3-4K Presentation Systems Receive Joint Interoperability Test Command (JITC) Certification

Defense Information Systems Agency (DISA) Adds Crestron to Unified Capabilities (UC) Approved Products List (APL); DMPS3-4K-150-C is the first 4K switching & control solution on the APL Rockleigh, NJ - May 5, 2017 - Crestron today announced that its latest DMPS3-4K DigitalMedia™ Presentation Systems (DMPS3-4K-300-C, DMPS3-4K-200-C), used in conjunction with a family of Crestron scalers,...

Read More »
Cobalt Blue FS-ULT70-99CB Class 3-4 Sterile Wipes
Wipes and Wipers

Cobalt Blue FS-ULT70-99CB Class 3-4 Sterile Wipes

Blue Thunder Technologies offers Cobalt Blue FS-ULT70-99CB validated sterile presaturated wipes for ultra-critical aseptic areas and where sterile compounding is performed. They are approved for use in a variety of sterile cleanroom applications including ISO Class 3-4 (Class 1-10) and higher. Cobalt Blue FS-ULT70-99CB contain four edges that are individually laser cut, with melted and sealed...

Read More »
CP-1501 Compactor delivers 39,500 lb maximum force.
Compactors

CP-1501 Compactor delivers 39,500 lb maximum force.

Suitable in business offices, retail outlets, hotels and universities, CP-1501 Commercial Compactor with single cylinder design is serviceable by front/rear load trucks. Featuring 45.6 x 46 in. top opening, and capacity of 1-1/2 cu-yd, unit provides cycle time of 50 sec. Having 90 cu-yd/hr volume displacement, compactors meet ANSI and OSHA standards.

Read More »
Controls and Controllers

JVC Delivers End-to-End Live Production and eng Solutions

WAYNE, NJ (April 20, 2017) – JVC Professional Video, a division of JVCKENWOOD USA Corporation, will showcase its end-to-end live production workflow, as well as a number of product enhancements and technology demonstrations, at the 2017 NAB Show (Booth C4315), which runs April 24-27 in Las Vegas, Nev. With the ProHD Mobile Bridge and the new ProHD Portable Bridge, JVC has created robust bonded...

Read More »
New Crestron Mercury is equipped with precision-engineered speaker and microphones
Controls and Controllers

New Crestron Mercury is equipped with precision-engineered speaker and microphones

Enabling users to instantly and securely present content wirelessly on the room display form laptop, smartphone or tablet, Mercury™ AV System is equipped with precision-engineered speaker and microphones for sounding phone calls from mobile devices or SIP phone systems. Featuring occupancy sensors and PinPoint™ proximity beacon, product helps in easy collaboration with colleagues using soft...

Read More »
MGC Series SCR Control meets UL61800-5-1 standards.
Controls and Controllers

MGC Series SCR Control meets UL61800-5-1 standards.

Operating on 115 or 230 VAC 50/60 Hz single phase power source, MGC Series SCR Control is designed for 90 or 180 VDC PMDC motors. Rated to 11 A maximum current and 50°C maximum temperature, unit provides 0.5G and + 0.1G on under and over 50 Hz vibration respectively. Using new current-limiting algorithm to prevent overshoot and reduces demagnetization, product offers 1.37 SCR form factor at...

Read More »
MIXO Modular Inserts are resistant to mechanical stresses.
Inserts

MIXO Modular Inserts are resistant to mechanical stresses.

Available with types of connections ranging from small signal connectors with low amp and voltage, up to 200 amp connectors, MIXO Modular Inserts are mounted side by side and locked into metallic frame. Each insert is designed to fit and lock into frame sizes ranging from 1 module to 12 modules. Housing signal, power, data and pneumatics contacts for conduction with up to 8 bars pressure...

Read More »
MS3 Inserts come with HiPIMS PVD coating.
Inserts

MS3 Inserts come with HiPIMS PVD coating.

Suitable for machining unstable or thin-walled components and setups, MS3 Inserts are equipped with coolant jet guiding geometry. Featuring smooth surface and extremely sharp cutting edges, MS3 inserts are used for cutting high temperature alloys, titanium, cobalt-based and nickel-based alloys. Units are combined with WSM01 grade and secondary applications include steel, stainless steel and...

Read More »
Dortronics Showcases Flexible, Economic 4800 Series Smart Interlock Controller at ISC West 2017
Controls and Controllers

Dortronics Showcases Flexible, Economic 4800 Series Smart Interlock Controller at ISC West 2017

User Configurable for up to Five Doors Las Vegas, NV (April 5, 2017) – This week at ISC West, Dortronics is showcasing their highly versatile and economical 4800 Series Smart Interlock Controllers in booth #1037. The 4800 Series offers users the flexibility to configure the solution in the field to accommodate up to five doors with ample flexibility for various input/output configurations. Also...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics