SI® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required
SI® inserts from PennEngineering® permanently install in plastic assemblies to provide durable and reusable metal threads for mating hardware and allow for repeated disassembly and re-attachment whenever required. By promoting quick and easy access to an assembly, SI inserts offer highly practical joining solutions in contrast to fixed and unyielding methods, such as adhesives or rivets....
Read More »
Analog Devices Presents Linear LT8708/-1 Regulator Controller with Six Independent Forms of Regulation
The Linear™ LT8708/-1 Bidirectional Buck-Boost Switching Regulator Controller is offered in 5 mm x 8 mm QFN-40 package and can operated in –40 to 125°C temperature range. The unit is operated with a single inductor over a 2.8 V to 80 V input voltage range and delivers an output voltage from 1.3 V to 80 V. It allows user to set the current limits independently using four resistors. The...
Read More »
New NetUSB II Controllers Support Speeds Up to 100 MHz TCK Rates
The NetUSB II multi-TAP JTAG Controllers come in 4- TAP or 8-TAP configurations. The units come with user-selectable pin configurations and 5V tolerant ATE-class pin drivers. It is offered with built-in protection for harsh environments. The controllers feature JTAG interface for PCBA testing, CPU-based functional testing and in-system-programming.
Read More »
New Linear Acoustic ARC Loudness Control System Provides User-Definable Loudness Target
The Linear Acoustic® ARC Loudness Control System meets EBU R128 and ATSC A/85 standards. The unit offers a “set and forget” LUFS output loudness target and selectable profiles. It features two channel (stereo) processing for two independent programs and APTO™ processing. The system is embedded with next-generation television loudness processor in a 1RU package.
Read More »
Direct Acting High Speed Servo Valve (DASV)
Download this paper to learn about how high performance servo valve's can be used in your most demanding hydraulic and pneumatic applications.
Read More »
New Trash Compacting System Vacuums Air from Trash Cans
Kaivac's new trash compacting system is capable of reducing trash volume by up to one half. The system features a vacuum wand that, when placed in the liner of a trash can, vacuums out the air that has collected there. In addition to the vacuum wand the system features a trash can and a strap attachment.
Read More »
FADU Introduces SSD Controller and Bravo Series Enterprise SSD Deliver Maximum IOPS/Watt
FADU’s Annapurna SSD Controller and FADU Bravo Series Enterprise SSD are powered by 64-bit, E51 multicore RISC-V Core IP. The Annapurna SSD controller offers a throughput of 3.5GB and IOPS of 800K. The FADU Bravo SSD delivers an efficiency of 3-4X IOPS/ watt and features an advanced flash memory controller.
Read More »New Power Management Solution Provides Up to Five High Efficiency Low Quiescent Current Outputs
The new Power by Linear™ LTC3372 from Analog Devices, Inc. offers a power management solution for systems requiring multiple low voltage outputs. The combination of a 60V synchronous buck switching regulator controller and four configurable synchronous monolithic buck regulators allows for up to five high efficiency low quiescent current outputs. These outputs can be porgrammed to either...
Read More »
New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with an improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. The Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. The MS3 insert comes with...
Read More »
New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. MS3 insert comes with jet-guiding...
Read More »
Automated Feedmill Control System
Sterling, IL June 2018: Sterling Systems & Controls, Inc. custom designs and manufactures the highest quality automation control systems for virtually any process or a complete facility. Sterling Systems & Controls has designed and provided equipment and software for a customized Automated Feedmill Control System using an Allen-Bradley PLC and desktop PC’s running Sterling Systems’ customized...
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
