New Valves Products

Pneumatic Valve System offers operational flexibility.

Moduflex Pneumatic Valve System incorporates 25-Pin, D-Sub V-Series module that allows for use of 25-Pin cables in IP40 applications while addressing up to 19 addresses. System lets users select from 0.32 and 0.80 Cv valve sizes and assemble dual 3/2, 4/2, and 4/3 configurations in one island to meet application requirements. Single tie-rod connection facilitates user ability to add or delete...

Foot Valve Cylinder Assembly suits demanding applications.

Stainless Steel Foot Valve Cylinder Assembly is able to pump organic and inorganic, hot, viscous, and gritty liquids that often clog pumping systems. It pumps liquid down to bottom of intake at controlled, constant rate, independent of head, to minimize silt build-up in well. Assembly is manufactured for use with company's electric or pneumatic piston pumps.

Ball Valves feature electric actuator.

Series 130 consists of Type 131 in polypropylene, Type 132 in PVDF, and Type 133 in PVC and CPVC, all available in sizes 3/8-2 in. Designed for service life of 250,000 cycles, EA 21 actuator is equipped with integrated emergency manual override and automatic adjustment of voltage and frequency for on/off or process control applications. Units include ISO-Namur interface and IP67-rated housing...

Directional Control Valves offer 2-way porting connections.

Model D03 Valve features nominal flow of 8 gpm with max flow of 16.8 gpm and max frequency of operation of 300 cpm. Recommended temperature range is 100Ã-

Bearing Solutions For Your Robotics and Automation Applications

This ebook provides an in-depth overview into bearing solutions for your robotics and automation applications.

Check Valves feature external SAE threads.

INSERTA(TM) ICT Thread-In Type Check Valves are all steel with hardened, lapped discs and seats, providing positive fluid shut off. Ranging in size from 5/16-3Ã-½ in., units have cracking pressure from 3-90 psi with standard being 15 psi. Mounted in any position, valves feature max operating pressure of 5,000 psi and temperature range of -22 to 175Ã-

Flow Control Valve delivers precise control of Cv.

Model FCV allows user to adjust Cv linearly from 0-19 Cv with electrical command. Single package incorporates 1 in. valve with actuator, positioner, and electronics. Available as normally open or normally closed, valve accepts either 0-10 V or 4-20 mA signal.

Solenoid Valves offer various configuration options.

Measuring 10 mm wide, HEA/HEB Series is available in 0.55 W or 0.15 W versions. Products deliver 0.07 Cv flow rate; have 6-7 ms response time; and can be mounted as single unit, single unit with base piping, or on F, A, and AJ type manifolds. HEA Series comes in 2-, 3-, and 5-port configurations, while HEB Series comes in 2- and 3-port configurations. Both are available with single and double...

Pump Bypass Valves are corrosion-resistant.

Available in pipe sizes from Ã-¼-3 in., thermoplastic Bypass Relief Valves protect chemical process systems from pump dead-heading by automatically diverting flow through NC bypass line in case of obstruction in piping system. Available body materials include PVC, polypropylene, Corzan CPVC, Kynar PVDF, and PTFE. Featuring flow rates from 2-200 gpm and set pressures from 5-150 psi, valves can...

Solenoid Valve is designed for aggressive liquids and gases.

Model HK5 direct-acting solenoid valve is 12.6 mm wide with 0.05 Cv flow rate, 1.8 W power consumption, pressure rating from vacuum to 30 psig, and working temperature range of 32-175Ã-

Check Valve withstands up to 250 psig backpressure.

Available in brass and 303 stainless steel, ultra-miniature Model CKV-M3 incorporates elastomeric duckbill and cracks open to allow flow at as little as Ã-½ psig. Unit is made from 5 mm hexagonal stock with max length of Ã-¾ in. Suited for gas and pneumatic applications, valve is available with in-line barb-to-barb configuration, internal or external M3 threads, or any combination...

Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions

Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.