
Cast Steel Flanged Gate and Swing Check Valves meet ASTM A216 WCB standards.
150 lb. Cast Steel Flanged Gate and Swing Check Valves are offered in sizes ranging from 1/4 up to 2 in. with flanged ball valves from 1 to 6 in. 400CSF Gate Valves and 422CSF swing check valves come with bolted bonnet whereas 405CSF Globe Valves feature outside screw and yoke. Units offer maximum pressure and temperature of 285 PSI and 1000ºF respectively.
Read More »
Qosina's Stopcocks meet RoHS and REACH standards.
Qosina’s Stopcocks are offered in low pressure ratings in different build-in styles. Units are designed in 1-way, 2-way, 3-way and 4-way configurations. These stopcocks offer connection option such as male luer locks, female luer locks, male luer slips, barbs and tubing ports.
Read More »
Cylinder Return Double Valves feature pneumatic controls.
Cylinder Return Double Valves are available in 3/2 and 5/2 RSe models. Units are used to monitor safe air supply/exhaust and safe cylinder return applications. Products are offered in port sizes ranging from 1/8 in. to 1/2 in. and come with spring return feature. These valves are equipped with two PNP proximity sensors.
Read More »
Mueller Swing Check Valves come in ductile iron construction.
Mueller Swing Check Valves are available in 2, 14, and 16 in. sizes and are UL-listed. Units feature bronze to BUNA seating, lifting rings, PN16 drilling, bosses and a drain plug. Products are rated at 350 psig cold working pressure and are FM-approved.
Read More »
The Ultimate Guide To PCB Hardware
This guide will help you understand the different components that can enhance the performance of your printed circuit board design.
Read More »
Drain Valves come in injection molded plastic construction.
Drain Valves are available in seven models and are suitable for tunnel, batch and coin-op washers. Units feature integrated AC motors and motor protectors. Products offer variety of configurations such as inlet and outlet port sizes, motor voltage and cycles and housing color.
Read More »
PST30 Diverter Valve comes in aluminum or 316 stainless steel housing.
PST30 Diverter Valve comes with internally shim-able positive stops, inflatable pneumatic seals and end plates. Unit features plugs, inlet and outlet ports flanged which mates with 150# ANSI or 10N-DIN flange patterns. Product offers 145° port-to-port rotation, 2-way switching capability and external tunnel position indication. Valve is equipped with pneumatic actuator which offers 4 second...
Read More »
Singer Pressure Management Valve is operated based on flow rates.
Singer 106/206 PGM-2PR-630-SM Pressure Management Valve comes with integral back up and is available in sizes 4-12 inches (DN100-DN300). This hydraulic unit comes with a minimum pressure at the inlet of 29 PSI. Product is equipped with pressure pilots and used paddle style orifice plate.
Read More »
Pressure Management Valve automatically adjusts to optimal downstream pressure.
106/206 PGM-2PR-630-SM Pressure Management Valve is offered in 4-12 in. sizes with minimum pressure of 29 PSI. Built on the 206 PGM or 106 PGM, unit’s integral backup system protects against diaphragm or pilot failure. The valve works on the flow signal received from the orifice plate. Valve prevents unwanted pressure spikes.
Read More »
Jerguson® 360 Series Safety Ballcheck Valves come with cleanout port.
Jerguson® 360 Series Safety Ballcheck Valves are equipped with locking pin and lock-out tag-out slot. Units are API 641 and ISO 15848-1 certified and meet API Class V shutoff requirements. Products are integrated on armored glass gage and quarter-turn position visible handle.
Read More »
Leaded and Lead-Free Brass Ball Valves are UL/FM approved.
Leaded and Lead-Free Brass Ball Valves are available in sizes ranging from ¼ in. to 4 in. Units feature a two-piece forged body design and come with 600PSI Non-Shock WOG 125PSI SWP rating. Products offer PTFE seats and a locking device on the handle.
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »