Solid State Relays offer various ratings and control modes.
SSR Series Power Controllers feature ruggedized construction, touch safe exterior, back-to-back SCR design, ambient ratings of 40Ã-ºC, and DIN rail mounting. Products are rated for 25, 50, and 75 A at voltages up to 600 Vac and provide zero-fired single phase control with control signals of 4.5-32 Vdc, 24-265 Vac, or 24-190 Vdc. Other features include self-lifting terminals, LED status...
Read More »Solid State Relay blocks voltages up to 800 V.
Model CPC1978J optically-coupled SSR has load current handling capability up to 10 A and offers low on resistance of 2.3 Ohms. It is packaged in i4-PAC(TM), which features silicon soft-soldered onto Direct Copper Bond substrate, providing 2,500 Vrms isolation from leads to backside of packages and enabling thermal resistance of 0.45 K/W from junction to heatsink. Applications include motor...
Read More »
Solid-State Relays reduce heat sink requirements.
Offered with integrated, removable finger-proof covers, CW24 and CW48 provide LED status indication and universal connectors. Available in steady-state current ratings of 10, 25, 50, 90, and 125 A rms, products have high surge ratings in silicon-controlled rectifier, AC-switch output configuration. Series CW48 and CW24 have respective blocking ratings of 1,200 and 600 Vpk and come in universal...
Read More »
Relay Assemblies interface with various control input signals.
Intelligent Control Solid State Relay Assemblies are rated for loads up to 100 A at 40Ã-
Read More »
All About Cable Drag Chains
This ebook provides an in-depth overview into cable drag chains.
Read More »
Solid State Relay has output status LED.
DIN rail mounted SSN solid-state relay employs LED to show output status and is supplied with built-in heat sink. Able to be specified for 15 or 25 A max load current, product suits applications where close horizontal mounting is desired. Unit measures 3.9 in. high, has a depth of 3.9 in., and requires .85 in. of DIN rail space. It accepts DC input signals of 4.5-30 Vdc and is UL recognized and...
Read More »
Solid-State Relays provide start-stop, on-off switching.
Totally encapsulated, Series SSR is impervious to shock and vibration and can be mounted anywhere. Units amplify current handling capabilities on pressure, level, and flow sensors. Each features SPST, normally open switch operation. Models SSR-25 and SSR-210 operate from 24-260 Vac with max load of 5 A and 10 A, respectively. Model SSR-312 operates from from 100-130 Vac with max load of 5 A, and...
Read More »Relays and Couplers suit appliance and HVAC markets.
Solid State Relay (SSR) and Phototriac Coupler components offer AC switching and control. Small power 8-pin DIP SSRs are offered in zero-cross and non-zero cross type. SSR components' drive current ranges from 60 mA to 16A. Rated 1.2 A, 8-pin DIP SSRs are also available. PC2 and PC3 lines of DIP-6 and expanded DIP-4 Phototriac Couplers include 200 V line with and without Zero cross functionality...
Read More »
Switch Modules have fully integrated controls.
Medium-Current PowerMod(TM) Solid-State switch modules include gate drive, power, over-current protection, pulse-width frequency error checking, and fault handling. Stackable from 11-66 KV, units provide over 99% switching efficiency, less than 500 ns switching times, pulse frequencies up to 100 KHz, and adjustable pulse widths from submicroseconds to DC, on pulse-to-pulse basis. Single...
Read More »Solid State Relays have intelligent features.
OMEGAÃ-® SSRINT Series intelligent Solid State Relays are optically isolated, have 1,200 V blocking voltage, 4,000 V isolation, zero voltage turn on, and built-in snubber. Fully integrated with heat sink and DIN rail mounting plate in space-saving design, relays automatically shut down in over-temperature conditions, and turn back on when returned to normal operating temperatures.
Read More »
Relay combines 3 units in one package.
Solid-state Series SG-24F includes 3 models, switching 10 through 25 A at up to 440 Vrms with dc inputs, and either zero-cross or random turn-on with up to 800 V blocking. LED indicator and built-in snubbers are included. Series uses photo-isolation for high input-to-output isolation of 4000 Vrms.
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
