Solid State Relays

Proportional Output Controller has analog input, solid-state design.
Solid State Relays

Proportional Output Controller has analog input, solid-state design.

Upon input from analog signal, single-phase RGx1PÂ- calculates and delivers necessary output power without requiring additional interface device. User-selectable switching modes – full cycle, phase angle, and soft start – let operators address different application requirements. While RGC1P contactors (15–63 A switching) have integrated heat sink, RGS1P...

Read More »
Solid State Relays

DIN-Mount Interface Relays have space-conserving design.

Measuring 14 mm wide x 70 mm high, RV8H electromechanical relaysÂ- typically install between output from PLC or other controller and load to increase switching capacity and protect output from damage. Products can replace 5–10 A general-purpose, plug-in relays. Offered in SPDT (up to 16 A) and DPDT (up to 8 A) models, all versions are available with AC or DC input (ranging from 5 Vdc to...

Read More »
Solid State Relays

Anacon Solid State Relay Now Features "Cool One" Heat Sink

Anacon's APC7120 has been a solid contributor to the wide variety of application specific solid state relay products offered by Anacon Power Controls. Utilizing the Anacon designed Cool One" 45MM DIN Mount heat sink, with a 40A rated output @40C ambient controlling line voltages up to 660Vac. Application focus for the APC 7120 is generally resistive loads and applications primarily found in...

Read More »
Hybrid Solid-State Relays provide noiseless switching.
Solid State Relays

Hybrid Solid-State Relays provide noiseless switching.

Featuring modular design consisting of GaAIAs IRED actuation control and MOSFETs for switch output, Models VOR1142A6, VOR1142B6, and VOR1142M4 are normally open SPST switches supplied in DIP-6, SMD-6, and SOP-4 packages, respectively. Single-channel 1 Form A units offer on-resistance of 22 Ω, load current of 140 mA, load voltage of 400 V, and low turn-on current of 0.25 mA. Electronically...

Read More »
SeriesOne DR Solid State Relays are Approved for Use in Hazardous Environment Installations Typical in the Oil and Gas Industry
Solid State Relays

SeriesOne DR Solid State Relays are Approved for Use in Hazardous Environment Installations Typical in the Oil and Gas Industry

Crydom’s innovative SeriesOne DR product line attains UL approval for both the ANSI/ISA CSA Class I Division 2 requirements and ATEX 95 Equipment Directive 94/9/EC ratings . Crydom, a brand of Custom Sensors Technologies, announces its Solid State Relay SeriesOne DR attains UL approval for both the ANSI/ISA CSA Class I Division 2 requirements and ATEX 95 Equipment Directive 94/9/EC ratings for...

Read More »
Solid State Relays suit confined space applications.
Solid State Relays

Solid State Relays suit confined space applications.

Measuring 36 x 21 x 24 mm, RF1 Series is designed for control of resistive loads. Zero switching type RF1A switchesÂ- ON when voltage crosses AC sine wave’s zero crossover point, while instant-ON type RF1B switches ON at instant when control voltage is applied. Relays are rated for up to 25 A load current, up to 280 Vac line voltage, and 5, 12, or 24 Vdc control voltage. Integrated...

Read More »
Solid State Relays

GPS-Synchronized Current Interrupter includes built-in relay.

Powered from AC or DC source, MicroMax GPS350 integrates Normally Closed AC/DC solid state relay that can interrupt up to 60 A with on/off cycles of less than 4 sec, and 80 A with 4-sec cycles or longer. Relay also provides voltage suppression which absorbs inductive energy released during on/off switching. Supplied in hardened enclosure for extreme conditions, MicroMax GPS350 can be programmed...

Read More »
Dual Analog Switch suits high-frequency applications.
Solid State Relays

Dual Analog Switch suits high-frequency applications.

Housed in 20-pin SOIC package, Model CPC7512 provides switching functionality of 2 normally open 1-Form-A solid state relays. Both switches incorporate T-switch compensation technique to provide 60 dB of off-isolation at 1 MHz by minimizing open-state capacitive coupling. Designed to provide single-ended or differential access to high-voltage networks, monolithic IC switches signal up to...

Read More »
Solid State Interface Relays switch loads up to 240 Vac.
Solid State Relays

Solid State Interface Relays switch loads up to 240 Vac.

Featuring 100 mA to 3 A switching capability in 6 mm wide space, RV8S Series is available for 24 Vdc, 48 Vdc, and 240 Vac input voltage applications, with output voltage ranges of 0–24 Vdc, 0–48 Vdc, and 24–280 Vac, respectively. Depending on model, operate time isÂ- as fast as 40 µs with 200 µs release time. DIN-rail mounted, IP20-rated relays feature...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics