New Sensors / Detectors / Transducers Products

Proximity Scanner has 300-

Presence-sensing Model RLS 100 safety laser scanner, with up to 19.7 ft deep protective field and 32.8 ft deep warning field, safeguards work areas in stationary or mobile applications. Unit can be placed on one corner of machine to be guarded to protect 2 sides, simultaneously. Field size, shape, and depth can be programmed via Configuration and Diagnostic Software (CDS) tool. Product has 2.8...

Photoelectric Frame Sensors come in aluminum housing.

Series FRS and OFB offer sensing areas of 64 x 70 mm through 200 x 250 mm. They allow non-contact detection of parts as small as 1.5 mm in diameter passing through sensing area at speeds up to 15 m/sec. FRS Series incorporates microprocessor to allow insertion of transparent tube through sensing area to guide difficult to handle parts. Sensors are offered with digital outputs NPN or PNP, or with...

Infrared Temperature Sensor suits OEM applications.

Non-contact MI-N3000 temperature sensor can be used in multiple locations to detect hot spots on moving material. Product can be used on dryers, conveyor belts, webs, and in thermoforming operations to sense temperature variation. Equipped with thermocouple and voltage outputs, unit measures temperatures from 34 to 932Ã-

Pressure Sensor simplifies programming and calibration.

Model 40D has built-in electronic processor that linearizes signal and compensates for temperature fluctuations. Measuring 2Ã-½ in. long with Ã-½ in. dia, space-saving design incorporates revolving display that allows readout to be viewed even if sensor is located in awkward to reach position. Up to 4 different measurement units/peak values can be shown on display. Programmable as NO or...

Design & Manufacturing Process of a Coil

Because the design and manufacturing of electromagnets are critical to the successful operation of the application, it's important to spend time defining your requirements before purchasing coils for an application. This eBook will guide you through the process of evaluating the application's constraints, identifying the needed specifications, and collaborating with a manufacturer to develop an appropriate coil solution for the application.

Ultrasonic Sensor is field configurable.

SUPERPROXÃ-® SC300 12 mm sensor detects changing colors, clear material, and small objects down to 0.1 mm at speeds of 2000/min. Up to 10 different engineering parameters can be graphically set through WindowsÃ-®-based software and AC441 configurator. With glass epoxy face and NEMA 4X/IP67 rating, sensor resists most acids and bases, including most food products. It is sealed to withstand...

Sensor detects objects regardless of background color.

WORLD-BEAMÃ-® QS30AF adjustable-field sensor features visible red sensing beam and background suppression circuitry, which allows it to detect only objects within defined sensing field while ignoring objects beyond cutoff point up to 12 in. Unit can be set for light operate or dark operate and features bipolar configuration with one NPN and one PNP output. Maximum output rating is 150 mA for...

Image Sensor/Camera suits mobile applications.

Model MI-0343 VGA-size CMOS stand-alone image sensor operates at 40 mW at 15 fps. Model MI-SOC-0343 System-on-a-Chip sensor camera operates at 85 mW at 15 fps. Both offer VGA resolution of 640 H x 480 V and can be programmed to output progressive scan images up to 30 fps. SoC can be programmed to output images in 8-bit CCIR 656 or 565 RGB format. It performs color recovery, color correction,...

Photodetectors come in single- and 4-element configurations.

Series Nd:YAG can be used in photovoltaic or photoconductive mode. Sensing areas of Quad photodetectors are divided into 4 independent quadrants. Models SPOT-15-YAG and SPOT-9-YAG offer sensing areas of 15 and 9 mm, respectively. Single-element Models PIN-100-YAG and PIN-5-YAG have sensing areas of 100 mmÃ-² and 5 mmÃ-², respectively. N on P silicon units operate in fully depleted mode to...

Collision Avoidance Sensor has range of 3 meters.

Series FE7W offers 3 m sensing range suited for automatic guided vehicles (AGVs) and other scanning applications. Each sensor incorporates one front scanner, two side scanners, and two independently adjustable scanning zones within one housing. Offerings for diffused mode photoelectric sensor include eight operating frequencies, three sensitivity adjustments, and NPN and PNP outputs.

Liquid Level Sensors use time domain reflectometry.

DetectorÃ-® Micropower Impulse Radar Sensors consist of Series MIR-800 with solid waveguide rods, and Series MIR-900 featuring fully encapsulated, flexible rods. Units measure distance to surface of tank contents and output 4-20 mA signal proportional to liquid level. Sensors pulse microwaves every 2 Ã-µsec and capture fresh readings every 310 msec. Resolution and repeatability are 0.01...

Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission

Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.