Push-Button Switches offer dual and quad lamp design.
Momentary Switches, Models SW44217 and SW44220 feature gold plated contacts and interchangeable lenses with clear top cover, black opaque sides, and legend plates. Designed to accommodate up to four T-1 Sub Midget Flange based lamps or LEDs, switches are rated 30 Vdc or 115 Vac, 2 A resistive, 0.5 A inductive. They measure 0.75 in. sq and require 1.6 in. behind display panel. Interconnection is...
Read More »Push Buttons and Indicators utilize LED technology.
RMQ-TitanÃ-® 22 mm Control Circuit Devices consist of push-button and indicating lights that combine ergonomic styling with LEDs that emit light non-stop for 100,000+ hr and provide low energy consumption from 0.3 W. Products are UL/CSA/CE approved and meet UL 4X, 13, IEC, IP67, and 69K requirements. Devices come in multi-range 12-264 V designs and are vibration-resistant and finger-safe per...
Read More »
Emergency Stop Switches conform to EN 418.
Emergency Stops are offered in twist-to-release and key-to-release versions and are protected to IP65 from front. Series 04 and 44 are 22.5 mm switches with 37 mm dia actuators. Series 04 incorporates bayonet fitting contact block with 2 mounting screws. Series 44 has snap-on contact block with slow-make forced-open contacts. Series 61 is 16 mm with 27 mm actuator, and is installed using threaded...
Read More »Touch Buttons are safety rated and ergonomically designed.
Series B, 800Z Zero-Force(TM) Touch Buttons provide Category 3 Type IIIB and Category 4 Type IIIC safety ratings for 2-hand control applications. Inter-linked sensor surface weaves 2 capacitive sensors in offset planes for product sensitivity, while fault detection alerts operator to potentially dangerous conditions. Noise immunity is achieved by utilizing pattern-recognition and noise-sensing...
Read More »
Understanding Food & Beverage Lubricants
The term "food-grade lubricants" may sound like another name for food oils such as cooking spray, salad dressing, lard, or canola oil, but it actually refers to lubricants that are safe for use in food processing equipment.
Read More »
Multi-Colored Switch indicates operating condition.
PCB-mounting Series 95 pushbutton can be illuminated with up to 3 different color LEDs. Able to change color when pressed, it maintains that color until pressed again. Available in 19 mmÃ-² versions and 12.7 mm versions, button's entire cap illuminates. Film insert can be inserted between diffuser and lens to mark function of each switch. Series 95 features noiseless switching action and...
Read More »
Pushbutton Switches suitable for 1/4 in. panel mounting.
Series 9000 miniature switches have 3/8 in. dia body with Ã-¼-40 threaded bushing and .157 in. dia black glass-filled polyamide actuator. Models are single pole with normally closed, normally open, or normally open/normally closed electrical functions. They offer solder lug or printed circuit terminals. Switches are suitable for applications where low power ratings up to 0.6 A 125 Vac, 0.3 A...
Read More »
Pushbutton Switches come with many options.
Miniature 18000 series switches are available in SPDT and DPDT with snap-action contact mechanism for tactile switching. Options include ratings from 100 mA at 30 Vdc to 1 A at 120 Vac or 30 Vdc, panel mounted styles, snap-in mounting models, and straight, vertical, or horizontal printed circuit mounting models. Other options include actuator length, round and square snap on caps in colors, and...
Read More »
Braille Door Switch helps blind or visually impaired.
Series 56 door-opener pushbutton is available with Braille markings such as Open or Close embossed on raised bezel on either side of pushbutton. To help visually impaired locate function button, raised bezel is available in two bright colors, yellow or orange, as well as red, blue, green, black, light and dark gray. Applications include sliding door toilet units in trains and coaches, and public...
Read More »
Pushbutton Switch mounts in 22.5 mm round hole.
Dual Lighted Pushbutton is available in momentary action with independent lighted indicator. It features green and red lenses and comes with international ON/OFF legends or with no legends. Actuator meets NEMA 4 and 13 and IP65 requirements, and switch contacts are rated 10 A at 660 Vac. Pushbutton meet UL, CSA, and other international approvals.
Read More »Pushbutton Switches have nickle-plated, aluminum bezels.
HW4 series 22 mm pushbuttons provide all features of existing HW series. Bright metal bezel switches stand out visually against darker backgrounds, allowing for flexibility in panel design. HW4 switches are compatible with all existing HW series components. Metal bezel models are available in round pushbutton styles with flush, extended, and mushroom buttons, as well as E-stops, pilot lights, and...
Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.
Read More »
