Pushbutton Switches

Illuminated Pushbutton Switches offer aesthetic options.
Pushbutton Switches

Illuminated Pushbutton Switches offer aesthetic options.

UB2 power and logic-level switches are offered with variety of cap styles and accessories. Sculptured caps have indentation that allows operator to slip finger into correct center position to actuate switch. Beveled caps evenly and brightly diffuse LEDs. Flat caps offer clear lens with colored diffusers. All caps are constructed of polycarbonate with glossy finish. Splash cover with clear soft...

Read More »
Pushbutton Switches withstand washdowns.
Pushbutton Switches

Pushbutton Switches withstand washdowns.

GB and G3B series of washable, ultra-miniature through-hole and surface mount pushbuttons have Sliding Twin Crossbar (STC) contact mechanism, where gold plated contacts are wiped clean with every actuation. Switches are suitable for use in low voltage, low current, logic level circuits, such as handheld equipment. Both models are sealed for automated processing techniques including flux-cleaning...

Read More »
Pushbutton Switch is rated to IP67 and IP65.
Pushbutton Switches

Pushbutton Switch is rated to IP67 and IP65.

Double-sided, glass-mountable pushbutton switch includes choice of red, green, or yellow halo LED illuminations. LED is rated at 24, 36, 48, 72, or 110 Vdc, and has minimum life of 100,000 hours. Pressel area can be supplied with raised symbols or engraved, and operating surface meets disability and Rail Vehicle Accessibility regulations. Switch is rated at 137Vdc/200mA maximum and 5VdcC/5mA...

Read More »
Pushbutton Switches are sealed for harsh environments.
Pushbutton Switches

Pushbutton Switches are sealed for harsh environments.

Miniature, panel-sealed Series 57 devices carry IP67 immersion rating, are made of velour chrome-plated zinc alloy, and have gold-plated palladium-nickel contacts and gold-plated brass terminals. Momentary-action switches are rated from 400 mA at 32 Vac to 125 mA at 125 Vac. They are available with round buttons and bezels, LED status illumination, and in red and green LED colors. Switches are...

Read More »
Pushbutton Switches

Emergency Stop Pushbutton has large, red actuator.

A01 Series is available with 1.575 or 0.945 in. dia red actuator button with white engraved arrows. If problem occurs, operator pushes button and power shuts down instantly, breaking 2 pairs of switch contacts. Double break opens both sides of power line for safety. To re-establish power to machine, switch button is rotated in direction of engraved arrows, which reconnects switch contacts and...

Read More »
Pushbutton Switches

Off-On Switch offers solder lug or insulated wire lead.

Off-On Latching Pushbutton Switch provides visual indication of switch state with 2-position actuator. It mounts in 13.6 mm hole and projects behind front panel less than 20 mm. It offers shock and vibration resistance, round and square panel bezels, and illumination options. Maximum current/voltage rating is 100 mA at 24 VDC with life of 200,000 cycles, 2A at 125 VAC with life of 10,000 cycles....

Read More »
Pushbuttons, Switches and Indicators have low, neat profile.
Pushbutton Switches

Pushbuttons, Switches and Indicators have low, neat profile.

Modular Series 61 includes round, square, and rectangular flush-mounted pushbuttons and indicators as well as two- and three-position key and selector switches. All protrude only 2 mm from front of panel. Rated at 250 Vac and 5 A, components are oil and water resistant, meet IP 65 front protection standards, and have gold-plated silver contacts with choice of plug-in or soldered terminals....

Read More »
Pushbutton Switches

Pushbutton Switches feature large ergonomic actuator.

AV Series metal pushbuttons, equipped with 30mm dia mushroom head button, can be operated by finger, fist or foot in harsh environmental conditions. They are front panel sealed to IP65 and can resist shocks up to 20 joules. Series consists of many switch configurations and choice of material, shape and marking options. With ratings up to 5A at 250Vac, they provide 50,000 cycles of electrical life.

Read More »
Pushbutton Switches handle tough environments.
Pushbutton Switches

Pushbutton Switches handle tough environments.

Panel-sealed Series 49-59 pushbuttons carry IP67 immersion rating and exceed NEMA 4X. Momentary action switches are offered with round or square bezels, in red, green or black. Snap-in switch elements are UL listed and CSA certified and have silver or gold contacts with current-carrying capacities up to 10A. Switch element snaps in behind button so designers can specify single-pole or double-pole...

Read More »
Tough Pushbuttons resist vandals and the environment.
Pushbutton Switches

Tough Pushbuttons resist vandals and the environment.

Series 76-95 sealed pushbutton switches are made of stainless steel with vandal-resistant chrome button and bezel. Button only protrudes 0.10 in. from front panel, making it difficult for vandals to pry switch from its mounting. Switches can also withstand impacts of significant force. Snap-in switch elements are UL listed and CSA certified, have silver or gold contacts with current-carrying...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics