New Printing & Duplicating Equipment Products

Spring Cylinders have threaded body style.

Universal Spring Cylinders have thread sizes that conform to standard devices, such as miniature shock absorbers or hydraulic clamp cylinders. Hardened steel plunger has tapped hole and pilot bore on compression end and threaded extension on tension end. Optional retracting lock can be used on threaded and non-threaded styles. When partially or fully extended, lock aids in preventing rotation of...

Bar Code Printer Drivers work with Windows.

Drivers for DCP case printers work with Windows NT 4.0, Windows 2000, and Windows XP operating systems. Drivers allow varying width of bars and spaces in bar codes to ensure readable codes on printed corrugated surface. Once formatted, print messages are then thermally imaged onto 12 x 38 or 24 x 38 in. length of high-resolution printing film, through which ink is transferred from print cylinder...

Hydraulic Cylinders for use in workholding applications.

Threaded body hydraulic cylinders can be used in clamping, positioning, punching, and pressing applications. Cylinders are available in capacities from 380 to 8800 lb of clamping force with stroke lengths from 1/4 to 2 in. Cylinder bodies are fully threaded and standard rod end threads enable use of standard contact bolts and accessories. Manifold mount cylinders mount directly into standard SAE...

Cable Block is self-adjusting.

Multi-angle, aerial cable block reduces friction when pulling cable around tight corners by adjusting itself from maximum 12 in. bending radius down to straight line. Pole-mounted corner block can be used in stringing applications that place cables up to 5 in. in diameter, such as 3 bundled 750 MCM cables. All-aluminum, heavy-duty block attaches to pole with inclusive steel chain binder.

The Ultimate Guide To Hydra Pneumatic and Servo Cylinders

This white paper provides a guide to hydra pneumatic and servo cylinders.

Print/Apply Systems have 64-bit microprocessor.

ALX 924/926 Print-and-Apply Systems offer maximum print speed of 16 ips. They produce 1D and 2D bar codes, graphics, and human-readable copy on range of label materials at 300 dpi print resolutions. The system's 1000-meter ribbon supply permits extended operation without ribbon changes. ALX 924 and 925 have print widths of 4.2 and 5 in., respectively. Both handle label widths up to 5.2 in. ALX...

Tie-Rod Cylinder provides continuous position sensing.

PFLF position feedback tie-rod cylinder includes linear resistive transducer. Eight bore sizes range from 1 1/2 to 8 in., in stroke lengths up to 24 in. PFLF is controlled by Pneumatic Control System (PCS). Closed-loop electronic controller with pneumatic valves accurately positions cylinder rod and holds it in position with various degrees of accuracy and force.

Analog I/O connects via network.

Additions to CompactBlock(TM) LDX I/O include analog and temperature blocks, plus networking. Analog blocks bring in current and voltage data from valves, pressure sensors, and related field devices. Temperature blocks accept signals from T/Cs and RTDs, and provide scaling for different device types allowing module to convert signal from any standard T/C or RTD into Fahrenheit or Celsius grade...

Wax-Resin Ribbons brighten up labels and tags.

Sirius(R) C3 color wax-resin ribbons provide consistently clear print quality and high degree of scratch, smear, heat, and chemical resistance. They can print at speeds up to 10 ips and print on variety of substrates. Ribbons are available in red, blue, navy, green, forest green, brown, yellow, orange, maroon, purple, white, bronze, silver, and gold.

Convertible Labeler offers versatility.

Convertible Labeler changes from label applicator to print and apply labeler in less than 15 minutes. Mini size accommodates 10 in. OD roll of labels and Standard size utilizes 16 in. rolls. Units include centralized keypad, screened label paths, and cantilevered printhead. Label sizes from .75 x .25 in. up to 4.1 x 14 in. can be applied.

Rodless Cylinders are short, thin, and light.

HORV Series are shorter, thinner, and lighter than company's conventional rodless cylinders of equal bore and stroke. Block type end cap eliminates need for mounting brackets and zero stroke dimension results in dead stroke that is 35% shorter than band-type rodless cylinders. Lightweight body places no loads on actuator axis or stand, even when using Y-Z axis. Cylinders are available with NPT...

SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents

Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.