New Power Supplies Products

Desktop Power Supplies deliver up to 150 W.

With universal input range of 90 264 Vac, Series DTPW150A provides single outputs of 12, 15, 17, 18, 19, 20, 24, 36, or 48 Vdc to power laptops, mini PCs, printers, camera display units, and flat panel monitors. Housed in 7.4 x 4.1 x 2.4 in. package, units include power factor correction, on/off switch, over voltage protection, and short circuit protection with auto recovery, Hold up times are...

Power Supply meets Energy Star-® and CEC requirements.

Suited for low-power electronic products, PSA15R wall plug adapter carries 15 W rating and meets ENERGY STAR and California Energy Commission (CEC) requirements. Universal input and interchangeable clip adapter plugs enable power supply to be connected to any power outlet, worldwide. Along with max leakage current of 0.25 mA, product provides no-load power consumption of less than 0.5 W and...

Switching Power Supplies come in 3.2 x 5 in. package.

Offered in U-frame or metal-enclosed version w/fan, Series VF-S150 features max output of 150 W with 16 cfm forced air cooling, and provides 600 W of peak power for up to 500 ms. Voltage outputs range from 3.3-48.0 Vdc on 6 single-output models. Power supplies produce full output power from 0-50Ã-

DC/DC Controller features spread spectrum modulation.

With input voltage of 2.75-9.8 V, synchronous step-down controller, Model LTC3809, features constant frequency operation and current mode architecture with MOSFET VDS sensing, eliminating need for current sense resistor, and delivering efficiencies as high as 95%. Housed in 3 x 3 mm DFN-10 or MSOP-10 package, unit can be configured with Burst ModeÃ-® operation to operate with 100 Ã-µA of...

The Economic and Strategic Benefits of Cloud Computing

Cloud computing and software-as-a-service (SaaS) vs. on-premise systems and proprietary software, which one should you choose? Check out this report, and find out which solution is best for your IT needs.

Boost Regulator delivers more than 34 V and 90% efficiency.

DC/DC Boost Converter, Model MIC2296 allows for more than 1.2 A of switch current and can step up input voltages from 2.5-10 V to generate output voltage up to 34 V. It offers output over-voltage protection, less than 1% line and load regulation, and 1 Ã-µA shutdown current. Housed in 2 x 2 mm leadless package, chip is suited for driving OLEDs, TFT-LCD displays, and WLED camera flashes.

Single-Port Injector for PoE works with Gigabit systems.

Model PSA20U power injector works on 10/100/1000baseT systems with speeds to 1,000 Mbps. It connects power onto data lines without corrupting signal or causing any attenuation loss through injector. Output gives 19.6 W while complying with IEEE 802.3af detection and fault protection requirements, and LEDs indicate status of power, connection, and fault diagnostic code. Max output load current is...

Welding Power Source can be used in multiple applications.

Multi-process, inverter-based InvertecÃ-® V450-PRO is suited for shops welding with 1/16 in. or larger diameter welding wire electrodes that also require power for arc gouging repair with 3/8 in. carbon. Capable of stick, Touch-Start(TM) TIG, MIG, cored wire welding, and arc gouging, product features controls that include selectable Hot Start(TM) and variable Arc Force functions. Unit...

DC/DC Converter has integrated short circuit protection.

Supplied in encapsulated, UL 94V-0-compliant SIP package measuring 26.95 x 9.25 x 12.45 mm, board-mounted NDH series has 2:1 input voltage range and outputs regulated to 0.5%. Nominal input voltage options are 24 and 48 V, with respective input ranges of 18-36 and 36-72 V, and dual output voltage options are 12 and 15 V for each nominal input voltage. Featuring power density of 1.05 W/cmÃ-³,...

CCFL Inverters resist moisture, shock, and vibration.

Used for powering CCFL-backlit LCDs, E200II and SE/SE2 Series DC-AC inverters feature fully vacuum-encapsulated design that ensures CCF lamp ignition, even in harsh environments. Products, operating at efficiencies from 80-85%, incorporate customized magnetics that are self-shielding to minimize EMI and RFI. Series E200II can power one or 2 CCFLs with up to 8 W of output power, while SE/SE2...

DC/DC Converter consumes 100 -µA quiescent current.

Step-down switching regulator Model LT3437 operates within VIN range of 3.3-60 V, making it suited for load dump or cold-crank conditions found in automotive applications. Rated at 500 mA, internal switch can deliver up to 400 mA of continuous output current at voltages as low as 1.25 V. Housed in 3 x 3 mm DFN package, unit features 200 kHz switching frequency, Burst Mode operation, external...

Industry Leading OEM with over 65 Years of Experience

Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.