AC/DC and DC/DC Power Supply mounts in VME or VXI system.
Generating up to 500 W at full load over operating temperature of -55 to +85Â-
Read More »AC/DC Switching Power Supplies feature active PFC.
Providing output power of 320 W, enclosed Series SP-320 accepts universal input from 85-265 Vac with active Power Factor Correction to 0.98. Eight models are available with single outputs from 5-48 Vdc. All include soft-start circuitry, integral EMI filtering, integral power-good LED indicator, and output adjustment potentiometer. Equipped with automatically controlled integral cooling fan, units...
Read More »POL Converters feature footprints down to 0.9 x 0.33 in.
Designed for applications with limited board space, PTV series is comprised of 8 vertical-mount, non-isolated point-of-load (POL) dc/dc converters with efficiencies up to 94%. Units feature power conversion and control technology with Auto-Track(TM) power sequencing and pre-bias start-up capability. Taking up as little as 0.3 in.Â-² PCB real estate, series offers current outputs of 8, 16, and...
Read More »Quarter Brick Bus Converter addresses telecom applications.
With 5:1 fixed-ratio, CBQ5 isolated intermediate bus converter delivers 9.6 V @ 33 A with max power density up to 245 W/in.Â-³ and accounts for unregulated energy or battery systems. It functions with POL and discrete circuit designs that power microprocessors, other chipsets, and converters. Operating over 38-55 V input, dc/dc converter provides full power, up to 350 W, with efficiencies to...
Read More »Everything You Need to Know About E-Textiles
This ebook provides an in-depth overview into everything you need to know about E-Textiles.
Read More »Converters enable low-noise transport of logic signals.
Electrical-to-Optical Converter, Model J720 and Optical-to-Electrical Converter, Model J730 convert logic levels to fiberoptic media for low-noise transport up to kilometers, with link jitter below 10 ps rms. Model J720 is powered by logic-level input, and Model J730 requires +12 V supply, user-furnished or from wall-plug power adapter. Model J730 provides digital logic output with risetime below...
Read More »DC/DC Brick Converters feature I2C communication.
With power density up to 108 W/inÂ-³, Astec AIF-300Vin Series can deliver up to 600 W of output power from input range of 250-420 Vdc. Series includes 6 models with single-output DC voltages of 1.8, 3.3, 5, 12, 15, 24, and 48 V. Operating at baseplate temperature range from -40 to 100Â-
Read More »Rack provides POE and network RPS compatibility.
With quick disconnect for 3 individual loads, 1,500 W, 1U Model PSM1554 accepts three PSM500 500 W power supplies. Unit is available with 48 V main and up to 30 A, and 12 V standby up to 4.5 A. Operating from input voltage of 90-264 Vac with active power factor correction, rack is hotplug and n+1 configurable for scalable and redundant applications. Each output is individually protected against...
Read More »Power Supply withstand harsh environments.
With immunity to vibrations and electrical disturbances, DIN Rail Mount Series TSP complies with EMC standards. Models are available with 12 or 24 Vdc outputs and 70-600 W output power with Power Good and Remote On/Off control functions. Units include dual-color LED status indicators, hot-swap/redundant operation, battery back-up, and voltage dip/brownout protection, as well as infinite short...
Read More »DC/DC Converters feature trimmable output.
With input of 6.0-14.0 Vdc, point-of-load Series VPOLXXX-12W is available in 10, 16, and 20 A models with output voltage from 0.75-5.0 V, which is trimmable via external resistor. Converters include remote on/off and output voltage sequencing, as well as protection against continuous short circuit, output over-current, and over-temperature. Operating from -40 to +85Â-
Read More »Power Supply features 24-port PoE injection.
Suited for switch and PBX applications, 275 W Model PSM275-909 provides 12 Vdc output for switch, 50 Vdc per port in PoE, and can implement 8-24 ports in PoE system, making it suited for 10/100 BaseT Ethernet switches, security systems, VoIP systems, and blade servers. Powered from 90-265 Vac or 44-57 Vdc input, unit can be operated in redundant ac or dc configuration with external isolation...
Read More »Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »