Position Sensors / Detectors / Transducers

Position Sensor offers loop-powered 4-20 mA operation.
Position Sensors / Detectors / Transducers

Position Sensor offers loop-powered 4-20 mA operation.

Operating over wide range of loop supply voltages and with loop resistances up to 800 W, GHSI 750 Series spring loaded position sensors can be installed in hazardous locations. Sensors consist of spring-loaded shaft running in precision sleeve bearing and connected to core of LVDT. Available in ranges of +.100 to +4.00 in., dc-operated, 2-wire units offer 0.000025 in. measurement repeatability...

Read More »
Position Sensors / Detectors / Transducers

Fiber Optic Array Sensor detects small components.

With beam spread of 28 mm that detects objects in any position across area of light transmission, LFP-1011-020 solves problem of capturing, counting, and controlling small components produced by high-speed manufacturing machinery. Use with 5 kHz amplifier optimizes small component detection, while use of blue-light emitting amplifier enables detection of small black rubber components. Each...

Read More »
Position Sensors / Detectors / Transducers

Low-Noise Linear Hall-Effect Sensors are fully programmable.

Suited for high-frequency current sensing applications, models A1360/1/2 are specified over -40 to 150°C range and exhibit noise down to 8 mVpp, flat temperature coefficient of 0%/°C, and bandwidth capability up to 50 kHz typ. Each is supplied in 1 mm thin, 4-lead SIP (KT package), which minmizes gaps in concentrator and C-core systems. Respectively, models A1360, A1361, and A1362...

Read More »
Position Sensors / Detectors / Transducers

Presence Sensor resists wind, rain, and extreme temperatures.

Offering close and long-range presence detection in broad range of weather conditions, R-GAGE(TM) QT50R uses Frequency Modulated Continuous Wave (FMCW) radar to detect moving or stationary cars, trains, trucks, and cargo. It detects target objects up to 15 m away and ignores anything beyond setpoint. With -40 to 65°C working temperature range, IP67-rated sensor operates at 24 GHz in ISM...

Read More »
MTS Sensors' Provide High-Speed Position Feedback in New Sawmill Construction
Position Sensors / Detectors / Transducers

MTS Sensors' Provide High-Speed Position Feedback in New Sawmill Construction

CARY, N.C. (March 13, 2008) - MTS Systems Corp., Sensors Division's Temposonics® R-Series sensors play a key role in a number of motion control applications throughout the Centralia Sawmill (Centralia, Wash.), a greenfield sawmill operating since 2006. The mill, which was built exclusively to process logs averaging 9 inches and to produce 2x4, 2x6, 4x4, 4x6 and 1x4 studs, maintains a...

Read More »
MTS Sensors' High-Speed Position Feedback for Industrial Ethernet
Position Sensors / Detectors / Transducers

MTS Sensors' High-Speed Position Feedback for Industrial Ethernet

CARY, N.C. (March 11, 2008) - MTS Systems Corp., Sensors Division's Temposonics® R-Series EtherCAT® sensor, a high-speed networking solution based on industrial Ethernet technology, is providing the fastest rates of data transmission and communication in industrial settings where high-speeds are necessary for complete factory automation. The sensor is being used in environments as...

Read More »
Position Sensors / Detectors / Transducers

Hall-Effect Sensor offers 125 Hz PWM output.

Targeting automotive and industrial markets in current and position sensing applications, Model A1351 converts analog signal from its internal Hall sensor element to digitally encoded PWM output signal. Integrated BiCMOS monolithic circuit includes Hall element, precision temperature-compensating circuitry to reduce intrinsic sensitivity and offset drift of Hall element, small-signal high-gain...

Read More »
Position Sensor requires one connector for two cylinders.
Position Sensors / Detectors / Transducers

Position Sensor requires one connector for two cylinders.

Twin-set sensor is comprised of 2 BIM-UNT sensing heads connected by overmolded cable; power and signal wires are then combined into integral M12 connector on sensor. BIM-UNT sensors measure 28 mm and active sensing faces are located at end of sensor to detect piston rod end position. Accessories range from precision mounting to wire-strain relief products allowing for installation of sensors in...

Read More »
Magnetostrictive Position Sensor comes with 48 mm dia.
Position Sensors / Detectors / Transducers

Magnetostrictive Position Sensor comes with 48 mm dia.

Temposonics® MT sensor is designed to be embedded in welded and tie-rod style cylinders or any space-limited cylinder application. Sensor provides measuring range of 50-1,500 mm with less than 0.04% FS linearity and less than 0.005% FS repeatability. Suited for mobile hydraulics applications, it operates over -40 to +105°C temperature range, and comes standard with cable connection...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers