Position Sensors / Detectors / Transducers

New Non-Contacting LVDT Position Sensors Offer Pressures Up to 20,000 psi
Position Sensors / Detectors / Transducers

New Non-Contacting LVDT Position Sensors Offer Pressures Up to 20,000 psi

The Non-Contacting LVDT Position Sensors from NewTek are designed for high temperature downhole drilling, wellbore case profiling and wire and cable line tension measurement applications. The hermetically-sealed units can withstand sulfides, acids, drilling mud and corrosive chemicals. They are constructed with special materials to provide reliable operations in temperatures up to 400°F. The...

Read More »
New Vert-X 2800 Series Sensors Feature J1939 CANBus, SPI and PWM Interface Options
Position Sensors / Detectors / Transducers

New Vert-X 2800 Series Sensors Feature J1939 CANBus, SPI and PWM Interface Options

The Vert-X 2800 Series Sensors are available in single and fully redundant versions with measurement ranging from 0 to 360° and a repeatability of 0.1°. The units are suitable for industrial, medical and off-highway vehicle applications and can be operated in -40 to +85°C temperature range. The sensors are offered in housing with base diameter of 28 mm and are sealed to IP 65. They provide up...

Read More »
NewTek Sensor Introduces M-375 Series Miniature AC LVDTs with Corrosion-Resistant Nickel-Iron Alloy Housing
Position Sensors / Detectors / Transducers

NewTek Sensor Introduces M-375 Series Miniature AC LVDTs with Corrosion-Resistant Nickel-Iron Alloy Housing

M-375 Series Miniature AC LVDTs are offered in measurement ranging from ± 0.025 to ± 1 in. with linearity of less than ± 0.25% over the full range. Units can be operated in -55°C to +135°C temperature range and the vented design equalizes pressure inside and outside the LVDT for an improved endurance to high pressure and temperature. The 3/8 in. diameter LVDTs are suitable for use in...

Read More »
New MTLT305D Sensor Module Offers 0.5 Degree Tilt and
Position Sensors / Detectors / Transducers

New MTLT305D Sensor Module Offers 0.5 Degree Tilt and

ACEINNA’s MEMS-based MTLT305D comes with accelerometers, gyroscopes and a temperature sensor providing accurate 3D acceleration, 3D rate as well as pitch and roll measurement. The MTLT305D comprises CAN J1939 & RS232 interfaces for network connectivity and an Ampseal 16, 6 position connector to supports 4.9 V to 32 V supply input range. The MTLT305D offers high reliability and has an operating...

Read More »
Novotechnik Launches the RFC4800 Series of Touchless Angle Sensors with CANBus Interface
Position Sensors / Detectors / Transducers

Novotechnik Launches the RFC4800 Series of Touchless Angle Sensors with CANBus Interface

Novotechnik introduces a series of touchless angle sensors with J1939 CANBus and CANopen interface. RFC4800 Series has a resolution of 14-bits across 360°, repeatability of 0.36° and linearity of ±0.5%. They have an operating temperature range from -40 to +125 °C and are sealed up to IP69K. The series is available with single and multi-channel versions with digital and analog output options.

Read More »
New P-Series LVDTs are Suitable for Use in Harsh Ocean Environments
Position Sensors / Detectors / Transducers

New P-Series LVDTs are Suitable for Use in Harsh Ocean Environments

NewTek’s P-Series of High-Pressure and Water Resistant LVDTs are suitable for reliable position measurements in deep subsea environments and high-pressure applications such as pressure test vessels and hydraulic actuators. Constructed of 0.52 in. diameter heavy-duty alloy, units can be operated at temperatures up to -65° to 400°F and pressures up to 20,000 psi. The sensor provide ratiometric...

Read More »
New ILPS-45 Linear Position Sensors Use Proprietary Inductive Technology
Position Sensors / Detectors / Transducers

New ILPS-45 Linear Position Sensors Use Proprietary Inductive Technology

ILPS-45 Linear Position Sensors are designed for measuring position of steam turbine valves, outdoors fastened to a building, bridge or structure. Units can be operated in -40C to 85°C temperature with a measuring range from 100 to 450 mm. The sensors come with double shaft seals and with optional mounting flanges, rod eye ends and connector or cable terminations. Units are offered in 44.5 mm...

Read More »
New GEMCO 958A Linear Displacement Transducer is Resistant to a Shock of 1,000 Gs
Position Sensors / Detectors / Transducers

New GEMCO 958A Linear Displacement Transducer is Resistant to a Shock of 1,000 Gs

GEMCO® 958A Linear Displacement Transducer is offered in stainless steel housing with a depth of less than 3.05 cm. Unit is suitable for applications such as steel making, agricultural equipment, transportation and automation industry. The transducer uses magenetostrictive technology for an analog position feedback that provides an accuracy of 0.04% of the sensing distance. Unit features a...

Read More »
New HT-1000 Series Linear Position Sensors Deliver Improved Mechanical and Electrical Life
Position Sensors / Detectors / Transducers

New HT-1000 Series Linear Position Sensors Deliver Improved Mechanical and Electrical Life

HT-1000 Series Extreme High-Temperature Linear Position Sensors are available in ± 12.7 mm to ±25.4 mm. Units are used in industrial equipment such as power plants, engine control systems and autoclaves and are constructed with high-temperature materials to withstand up to 1000°F temperature. The sensors deliver a linearity of ±0.5% of full range and features through-bore design. Unit’s...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics