New LV-45 Linear Position Sensors by Alliance Sensors Group Feature Rugged Design
Alliance Sensors Group’s new LV-45 LVIT linear position sensors can withstand high vibration, severe shocks, and temperature and humidity fluctuations. Designed for measurement applications requiring rugged devices, the contactless inductive sensors are suitable for heavy industrial and extreme environment civil engineering applications. They are able to replace DC-LVDTs and offer mounted...
Read More »
New Rotary Position Sensors from NewTek Offer Accurate Angular Displacement Measurements
NewTek Sensor Solutions has released the RV series of RVDT Rotary Position Sensors. These sensors offer accurate angular displacement measurements of rotating elements such as quarter-turn ball and butterfly valves, actuators, throttles, and dancer arm tensioners. Features inlcude a shaft that rottes 360 degrees with no stops and little friction, shaft angle position measurements over a nominal...
Read More »
New RV Series of LVDT Displacement Sensors from NewTek Are Built for Rugged Conditions
NewTek’s new AC-operated RV series of displacement sensors feature non-contacting design for fewer wear parts, operate between -65 and 220 degrees F, and are shock and vibration tolerant for automation and packaging applications. Offering angular displacement measurement of rotating elements, the sensors have shafts that rotate 360 degrees, and can measure shaft angle position to a nominal...
Read More »
New Non-Contacting LVDT Position Sensors Offer Pressures Up to 20,000 psi
The Non-Contacting LVDT Position Sensors from NewTek are designed for high temperature downhole drilling, wellbore case profiling and wire and cable line tension measurement applications. The hermetically-sealed units can withstand sulfides, acids, drilling mud and corrosive chemicals. They are constructed with special materials to provide reliable operations in temperatures up to 400°F. The...
Read More »
An Operations Manager's Guide To The Mobile Connected Factory of Tomorrow
This white paper provides an overview of mobile technology for managing your manufacturing facility, while also discussing the advantages of being an early adopter.
Read More »
New Vert-X 2800 Series Sensors Feature J1939 CANBus, SPI and PWM Interface Options
The Vert-X 2800 Series Sensors are available in single and fully redundant versions with measurement ranging from 0 to 360° and a repeatability of 0.1°. The units are suitable for industrial, medical and off-highway vehicle applications and can be operated in -40 to +85°C temperature range. The sensors are offered in housing with base diameter of 28 mm and are sealed to IP 65. They provide up...
Read More »
New optoNCDT 1750LL Laser Triangulation Sensor Provides an Oval-Shaped Light Spot
The optoNCDT 1750LL Laser Triangulation Sensor is designed for high precision measurements on structured surfaces like sandpaper, grinding wheels, rubber and shiny metals. The unit compensates for interferences caused due to structures, depressions and surface defects with its evaluation algorithms.
Read More »
NewTek Sensor Introduces M-375 Series Miniature AC LVDTs with Corrosion-Resistant Nickel-Iron Alloy Housing
M-375 Series Miniature AC LVDTs are offered in measurement ranging from ± 0.025 to ± 1 in. with linearity of less than ± 0.25% over the full range. Units can be operated in -55°C to +135°C temperature range and the vented design equalizes pressure inside and outside the LVDT for an improved endurance to high pressure and temperature. The 3/8 in. diameter LVDTs are suitable for use in...
Read More »
New MTLT305D Sensor Module Offers 0.5 Degree Tilt and
ACEINNA’s MEMS-based MTLT305D comes with accelerometers, gyroscopes and a temperature sensor providing accurate 3D acceleration, 3D rate as well as pitch and roll measurement. The MTLT305D comprises CAN J1939 & RS232 interfaces for network connectivity and an Ampseal 16, 6 position connector to supports 4.9 V to 32 V supply input range. The MTLT305D offers high reliability and has an operating...
Read More »
Novotechnik Launches the RFC4800 Series of Touchless Angle Sensors with CANBus Interface
Novotechnik introduces a series of touchless angle sensors with J1939 CANBus and CANopen interface. RFC4800 Series has a resolution of 14-bits across 360°, repeatability of 0.36° and linearity of ±0.5%. They have an operating temperature range from -40 to +125 °C and are sealed up to IP69K. The series is available with single and multi-channel versions with digital and analog output options.
Read More »
New P-Series LVDTs are Suitable for Use in Harsh Ocean Environments
NewTek’s P-Series of High-Pressure and Water Resistant LVDTs are suitable for reliable position measurements in deep subsea environments and high-pressure applications such as pressure test vessels and hydraulic actuators. Constructed of 0.52 in. diameter heavy-duty alloy, units can be operated at temperatures up to -65° to 400°F and pressures up to 20,000 psi. The sensor provide ratiometric...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
