Position Sensors / Detectors / Transducers

Linear Position Sensor PG Series Designed for Steam Turbine Valve Control Systems
Position Sensors / Detectors / Transducers

Linear Position Sensor PG Series Designed for Steam Turbine Valve Control Systems

MOORESTOWN, N.J. -Â- The Alliance Sensors Group PG Series LVDT linear position sensors are designed and engineered specifically for valve position sensing applications for steam turbine control systems in electric power generation plants. Previously, the LVDTs used in the power generation industry were either designed by OEMs over 40 years ago, or are catalog LVDTs slightly modified for...

Read More »
Linear Position Sensors offer four analog outputs and SenSet(TM) field recalibration.
Position Sensors / Detectors / Transducers

Linear Position Sensors offer four analog outputs and SenSet(TM) field recalibration.

Designed for factory automation and other commercial applications, LR-19 Series Inductive Linear Position Sensors uses LVIT Technology. Presented in sizes 25 to 200 mm (1 to 8 inches), sensor’s contactless operation prevents wear out. Placed in a 19 mm (0.75 inch) diameter anodized aluminum housing sealed to IP-67, LR-19 series is available with axial cable or connector terminations, or with...

Read More »
Magnetostrictive Position Sensor offers field serviceability.
Position Sensors / Detectors / Transducers

Magnetostrictive Position Sensor offers field serviceability.

Designed for use with hydraulic cylinders in mobile applications, externally threaded FMH Sensor features 2-part design that allows users to separate flexible sensing element and electronics from housing without opening hydraulic system. Sensor uses proprietary Temposonics® magnetostrictive technology to deliver ±0.2 mm typical resolution, repeatability of ±0.005% FS, and...

Read More »
Magnetic DC Proximity Sensors have cylindrical form factor.
Position Sensors / Detectors / Transducers

Magnetic DC Proximity Sensors have cylindrical form factor.

Featuring stainless steel shielded housings, M-series includes 10 modelsÂ- covering 8, 12, and 18 mm sizes. NPN or PNP models with normally-open (NO) or normally-closed (NC) outputs are available, and standard sensing distances range from 0–70 mm. Along with IP65/IP67 or IP68/IP69K ratings, features include built-in overload protection and attached 2 m axial cable or M8 or M12 connector....

Read More »
Laser Distance Sensor measures glossy and coarse surfaces.
Position Sensors / Detectors / Transducers

Laser Distance Sensor measures glossy and coarse surfaces.

Utilizing multi-spot measuring principle, MESAX Sensor provides accurate and repeatable measurement results, without elaborate conversion or external software. Up to 600 measured values of object are recorded and distance is then calculated on basis of intelligent analysis. Taking up to 500 distance measurements/sec at resolution up to 2 Â-µm, sensor is suited for precise measurement...

Read More »
Position Sensors / Detectors / Transducers

ifm Solves the Challenge of Wiring Cylinder Sensors in Close Proximity by Integrating Two Sensor Elements into a Single Connector.

ifm’s MK Series T-slot and C-slot Dual Cylinder Sensors reduce wiring by and hardware by using one connector, drastically lowering total installation and material costs. The dual cylinder sensors provide two sensor elements integrated into standard 4-pin wiring blocks (a single 4-pin M8 connector or a 4-pin M12 connector). In addition, ifm’s mechanically robust housings ensure a highly...

Read More »
Position Sensors / Detectors / Transducers

Compact Ultrasonic Sensors come in metal housings.

UsingÂ- time of flight measurement for position and level sensing applications, ultrasonic sensors come in stainless steel housing. Respective sensing ranges for M18 cube and M18 tubular designs are up to 1.2 and 2.2 m. Along with digital and analog outputs, features include pushbutton sensitivity adjustment and vibrating sound transducer. Detection occurs regardless of target color,...

Read More »
MTS Adds NEC and CEC Approvals to Hazardous Area and Safety Area Sensor Offering
Position Sensors / Detectors / Transducers

MTS Adds NEC and CEC Approvals to Hazardous Area and Safety Area Sensor Offering

Cary, N.C - MTS Sensors, a division of MTS Systems Corporation (NASDAQ:MTSC), announced today that the Temposonics® T-Series product line is now certified to NEC and CEC Standards 500, 505 and 506. NEC and CEC certifications are used in US and Canada to ensure that equipment meets specified standards for operating in potentially hazardous conditions. The T-Series linear positons sensors,...

Read More »
Non-Contact Analog Angle Sensor has hermetically sealed housing.
Position Sensors / Detectors / Transducers

Non-Contact Analog Angle Sensor has hermetically sealed housing.

Supplied in IP69K-rated, laser-welded, stainless steel 1.4404 housing, POSIROT® PRAS6 can be used in humid, wet, dirty, and underwaterÂ- environments. Solid-state Hall Technology, which imparts shock and vibration resistance, enables magnetic, contactless angular displacement and position measurement of rotating objects from 0° to 360°. Outputs are...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics