Position Sensors / Detectors / Transducers

Sputtered Thin Film Transducer has accuracy of 0.25%.
Position Sensors / Detectors / Transducers

Sputtered Thin Film Transducer has accuracy of 0.25%.

Series PX1000 provides stability of ±0.1% FSO for minimum of 24 hr when subjected to any combination of constant temperature and pressure within specified limits. Standard ranges are 15-10,000 psi for absolute and gage models, and for sealed gage models ranges are available at 100 psi and above. Featuring all-welded construction with strain isolation snf stable sensor elements, units are...

Read More »
Position Sensors / Detectors / Transducers

Sensor measures vibration displacement on rotating equipment.

PC420D is IEPE displacement transducer and 4-20 mA vibration transmitter packaged as single sensor. It outputs 4-20 mA signal, based on displacement level of machine vibration, and is able to track balance component of machines. Integrating signal into existing PLC, DCS, or SCADA system simplifies real-time health monitoring. Sensor is suited for condition based monitoring and predictive...

Read More »
Rotary Position Sensors measure over range of 120°.
Position Sensors / Detectors / Transducers

Rotary Position Sensors measure over range of 120°.

Contact-free, DC-operated RSE 1500 Series measures angular displacement of rotating elements up to 120°. Shafts rotate full 360Â-º, but units operate in 0-30, 60, 90, or 120° rotation ranges in temperatures from 0-185ºF. Linearity error is less than 0.10% of full range output. Fractional-turn sensors operate from nominal 24 Vdc power, supply true 0-to-10 Vdc output, and...

Read More »
Position Sensor offers loop-powered 4-20 mA operation.
Position Sensors / Detectors / Transducers

Position Sensor offers loop-powered 4-20 mA operation.

Operating over wide range of loop supply voltages and with loop resistances up to 800 W, GHSI 750 Series spring loaded position sensors can be installed in hazardous locations. Sensors consist of spring-loaded shaft running in precision sleeve bearing and connected to core of LVDT. Available in ranges of +.100 to +4.00 in., dc-operated, 2-wire units offer 0.000025 in. measurement repeatability...

Read More »
Position Sensors / Detectors / Transducers

Fiber Optic Array Sensor detects small components.

With beam spread of 28 mm that detects objects in any position across area of light transmission, LFP-1011-020 solves problem of capturing, counting, and controlling small components produced by high-speed manufacturing machinery. Use with 5 kHz amplifier optimizes small component detection, while use of blue-light emitting amplifier enables detection of small black rubber components. Each...

Read More »
Position Sensors / Detectors / Transducers

Low-Noise Linear Hall-Effect Sensors are fully programmable.

Suited for high-frequency current sensing applications, models A1360/1/2 are specified over -40 to 150°C range and exhibit noise down to 8 mVpp, flat temperature coefficient of 0%/°C, and bandwidth capability up to 50 kHz typ. Each is supplied in 1 mm thin, 4-lead SIP (KT package), which minmizes gaps in concentrator and C-core systems. Respectively, models A1360, A1361, and A1362...

Read More »
Position Sensors / Detectors / Transducers

Presence Sensor resists wind, rain, and extreme temperatures.

Offering close and long-range presence detection in broad range of weather conditions, R-GAGE(TM) QT50R uses Frequency Modulated Continuous Wave (FMCW) radar to detect moving or stationary cars, trains, trucks, and cargo. It detects target objects up to 15 m away and ignores anything beyond setpoint. With -40 to 65°C working temperature range, IP67-rated sensor operates at 24 GHz in ISM...

Read More »
MTS Sensors' Provide High-Speed Position Feedback in New Sawmill Construction
Position Sensors / Detectors / Transducers

MTS Sensors' Provide High-Speed Position Feedback in New Sawmill Construction

CARY, N.C. (March 13, 2008) - MTS Systems Corp., Sensors Division's Temposonics® R-Series sensors play a key role in a number of motion control applications throughout the Centralia Sawmill (Centralia, Wash.), a greenfield sawmill operating since 2006. The mill, which was built exclusively to process logs averaging 9 inches and to produce 2x4, 2x6, 4x4, 4x6 and 1x4 studs, maintains a...

Read More »
MTS Sensors' High-Speed Position Feedback for Industrial Ethernet
Position Sensors / Detectors / Transducers

MTS Sensors' High-Speed Position Feedback for Industrial Ethernet

CARY, N.C. (March 11, 2008) - MTS Systems Corp., Sensors Division's Temposonics® R-Series EtherCAT® sensor, a high-speed networking solution based on industrial Ethernet technology, is providing the fastest rates of data transmission and communication in industrial settings where high-speeds are necessary for complete factory automation. The sensor is being used in environments as...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers