Position Sensors / Detectors / Transducers

Position Sensors / Detectors / Transducers

Linear Displacement Transducer uses magnetostrictive technology.

With no moving parts to wear out, AMETEK/Gemco 955 eBrik provides continuous position feedback when installed on automated factory machinery. Unit is available in stroke lengths from 1-72 in. with analog output of 0-10 Vdc or 4-20 mA. Sensor offers field programmable zero and span settings, electronic diagnostic feedback, and accuracy to ±0.03% of stroke. With IP67-rated aluminum enclosure,...

Read More »
Submersible Transducers monitor bridge movement and strain.
Position Sensors / Detectors / Transducers

Submersible Transducers monitor bridge movement and strain.

LVDTs feature stainless steel construction that resists corrosive effects of winter road treatments and also allows operation in marine environments. Utilizing 4-20 mA, 2 wire loop minimizes wiring installation and meet needs of applications requiring long cable runs. Used to measure movements and strain in structures caused by weight and volume of traffic, environmental conditions, and other...

Read More »
Hall-Effect Rotary Position Sensor suits diverse applications.
Position Sensors / Detectors / Transducers

Hall-Effect Rotary Position Sensor suits diverse applications.

Supplied in IP67-sealed housing, Model 9960 comes in configurations with various termination options, single or dual outputs, and 24 active electrical angles. Versatile applicability is due to 360° turn capability. Solution serves as rotary motion control sensor for applications in harsh environments, including steering and pedal positioning in vehicles; marine steering and speed control;...

Read More »
Displacement Transducers withstand challenging environments.
Position Sensors / Detectors / Transducers

Displacement Transducers withstand challenging environments.

Featuring modular construction with stainless steel body and core carrier, SR Series is suited for challenging laboratory, test, and process control applications. Transducers, pressure tested to 100 bar, are available IP68-rated or hermetically sealed with extra screening against electrical interference. Submersible version comes with 3 m of FEP cable standard. Screw mount options are available,...

Read More »
Linear Hall-Effect Sensor ICs feature subminiature footprint.
Position Sensors / Detectors / Transducers

Linear Hall-Effect Sensor ICs feature subminiature footprint.

Housed in subminiature SOT-23 surface mount package, SS39ET Series monitors magnetic fields from permanent magnet or electromagnet. Devices respond to both North and South poles, and can be powered with voltages as low as 2.7 V with low current consumption of 6 mA at 5 Vdc. Operating from -40 to 212°F, ICs are suited for pump control, current sensing for motor load monitoring,...

Read More »
Magnetic Bearing Controller controls up to 5 axes.
Position Sensors / Detectors / Transducers

Magnetic Bearing Controller controls up to 5 axes.

Featuring power amplifiers rated at 3,600 VA/channel, Insight(TM) 3600 provides control of advanced permanent magnet, bias magnet bearings in up to 5 axes. Sensor interface drives and demodulates up to 5 sensor coils, providing position of rotor in real-time, while DSP regulates power amplifier current to drive bearing actuators based on position sensor data. Graphical user interface enables...

Read More »
Position Sensors / Detectors / Transducers

Hall-Effect Position Sensor IC suits tight-space applications.

Promoting flexibility for designs with tight space requirements, SS39ET Series comes in SOT-23 SMT package with subminiature footprint. IC responds to North and South poles and monitors magnetic fields from permanent magnet or electromagnet. Operating from 2.7-6.5 Vdc supply while consuming 6 mA at 5 Vdc, IC has thermally balanced design that provides stable operation over full -40 to...

Read More »
Balluff's Explosion Proof Linear Transducer Now has Worldwide Hazardous Approval Ratings
Position Sensors / Detectors / Transducers

Balluff's Explosion Proof Linear Transducer Now has Worldwide Hazardous Approval Ratings

Florence, KY: Balluff's Micropulse TA12 explosion-proof linear position transducer now has IECEx hazardous area approval rating, in addition to existing ATEX and North American approvals, expanding the acceptability for the Balluff TA12 transducer for worldwide use in applications where hazardous gases and/or dusts are present. The Micropulse TA12 is a non-contact linear position sensor with a...

Read More »
Hall Effect Sensors suit harsh transportation applications.
Position Sensors / Detectors / Transducers

Hall Effect Sensors suit harsh transportation applications.

Housed in IP67-sealed package with integral connector, RTY Series Rotary Position Sensors provide 12 million cycle product life and 8 operating ranges up to 360°, which are tolerant to over-travel. Low and high voltage versions cover input voltage range of 4.5-30 Vdc. Providing non-contact operation, sensors use magnetically biased, Hall-effect IC to sense rotary movement of actuator shaft...

Read More »
Position Sensors / Detectors / Transducers

Hall-Effect Rotary Position Sensor has 12 million cycle life.

Offered with operating ranges up to 360° and input ratings from 4.5-30 Vdc, RTY Series comes in IP67 package with integral connector, reverse polarity protection, and EMI resistance. Solid-state Hall-effect technology provides non-contact operation and low torque actuation, while industry-standard AMP termination, 32 mm mounting pitch, North American and European pinout styles, and compact...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers