Position Sensors / Detectors / Transducers

Position Sensors / Detectors / Transducers

Hall-Effect Position Sensor IC suits tight-space applications.

Promoting flexibility for designs with tight space requirements, SS39ET Series comes in SOT-23 SMT package with subminiature footprint. IC responds to North and South poles and monitors magnetic fields from permanent magnet or electromagnet. Operating from 2.7-6.5 Vdc supply while consuming 6 mA at 5 Vdc, IC has thermally balanced design that provides stable operation over full -40 to...

Read More »
Balluff's Explosion Proof Linear Transducer Now has Worldwide Hazardous Approval Ratings
Position Sensors / Detectors / Transducers

Balluff's Explosion Proof Linear Transducer Now has Worldwide Hazardous Approval Ratings

Florence, KY: Balluff's Micropulse TA12 explosion-proof linear position transducer now has IECEx hazardous area approval rating, in addition to existing ATEX and North American approvals, expanding the acceptability for the Balluff TA12 transducer for worldwide use in applications where hazardous gases and/or dusts are present. The Micropulse TA12 is a non-contact linear position sensor with a...

Read More »
Hall Effect Sensors suit harsh transportation applications.
Position Sensors / Detectors / Transducers

Hall Effect Sensors suit harsh transportation applications.

Housed in IP67-sealed package with integral connector, RTY Series Rotary Position Sensors provide 12 million cycle product life and 8 operating ranges up to 360°, which are tolerant to over-travel. Low and high voltage versions cover input voltage range of 4.5-30 Vdc. Providing non-contact operation, sensors use magnetically biased, Hall-effect IC to sense rotary movement of actuator shaft...

Read More »
Position Sensors / Detectors / Transducers

Hall-Effect Rotary Position Sensor has 12 million cycle life.

Offered with operating ranges up to 360° and input ratings from 4.5-30 Vdc, RTY Series comes in IP67 package with integral connector, reverse polarity protection, and EMI resistance. Solid-state Hall-effect technology provides non-contact operation and low torque actuation, while industry-standard AMP termination, 32 mm mounting pitch, North American and European pinout styles, and compact...

Read More »
Rotary Position Sensor features external magnet .
Position Sensors / Detectors / Transducers

Rotary Position Sensor features external magnet .

Non-contact position sensors PRAS20/PRAS21 use an external position magnet to provide output signal over max 360° measurement range, with smaller measurement ranges available in 15° increments. Sensor output is 0.5-4.5 V, and for PRAS20 series, 0.5-10 V and 4-20 mA outputs are also available. PRAS21 series housing has height of less than Â-¼ in. and is rated IP60. It is designed...

Read More »
Linear Position Sensor covers electrical strokes to 10 mm.
Position Sensors / Detectors / Transducers

Linear Position Sensor covers electrical strokes to 10 mm.

Featuring non-contact Hall effect technology, Model 20 LHE is available with spring return system and is suited for applications in harsh environments. Unit features linearity down to ±1 and performs up to 10 million cycles. With analog ratiometric or digital PWM output, sensor provides continuous performance with no drift of linearity. Operating with supply voltage of 5 V ±10% and...

Read More »
Customizable SG1 Provides 80-inch Stroke Range, IP67 Protection and Spectacular Value for OEMs
Position Sensors / Detectors / Transducers

Customizable SG1 Provides 80-inch Stroke Range, IP67 Protection and Spectacular Value for OEMs

Celesco Transducer Products is now selling the SG1 - a slim, compact and low-cost stringpot that is now in stock, available for immediate delivery and can be completely customized to meet the specific needs an OEM has. The SG1 ships with a 10K-ohm potentiometer that provides a voltage divider output signal proportional to the position of the spring loaded measuring cable. The SG1 is designed to...

Read More »
LVDT Position Sensors ensure quality control in steel mills.
Position Sensors / Detectors / Transducers

LVDT Position Sensors ensure quality control in steel mills.

Environmentally sealed to IP68 standard, rated to 185°F, and protected against dust ingress, Steel Mill Position Sensors monitor position of milling frames that support rollers during hot rolling process, ensuring frames do not deform or shift. Radial configuration with rod ends facilitates installation, while pre-calibrated on-board electronics eliminate need to configure signal...

Read More »
Position Sensors / Detectors / Transducers

Linear Magnetic Field Sensors offer ±70 Oe dynamic range.

Based on Tunneling Magnetoresistance technology, Models MMLD47F, MMLP57F, and MMLP57H feature ultra-low hysteresis below 0.1% of full-scale range, magnetic field sensitivity from 3-6 mV/V/Oe, and typical current consumption between 5-12.5 Â-µA with 1 V voltage supply. Units are available in 6 x 5 x 1.7 mm SOP8 and 3 x 3 x 0.75 mm DFN8 packages, suited for industrial and consumer applications...

Read More »
Hall-Effect Position Sensors offer 4-20 mA output option.
Position Sensors / Detectors / Transducers

Hall-Effect Position Sensors offer 4-20 mA output option.

Measuring .875 in. dia with .750 in. max length, H009 Series converts relative changes in magnetic field into electrical signal to provide position change information. Units with 4-20 mA output join existing Analog, PWR, and Serial output options. Providing 12-bit resolution with rotational life of over 100 million revolutions, sensors feature absolute linearity of ±0.1% at ambient and...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics