Position Sensors / Detectors / Transducers

Position Sensors / Detectors / Transducers

Linear Position Sensors offer field calibration.

With SenSet™ Field Programmability technology, installers of LV, MR-7, and ME-7 Linear Position Sensors can exactly match full scale electrical output (4–20 mA or 0–10 Vdc) of sensor to actual mechanical movement range of device in which sensor is installed. After installing sensor, user moves device to its zero position, presses SenSet button,Â- then moves device to...

Read More »
GE Works with Georgia Tech Research Institute to Understand Neurological Injuries of Wounded Soldiers
Position Sensors / Detectors / Transducers

GE Works with Georgia Tech Research Institute to Understand Neurological Injuries of Wounded Soldiers

I-BESS program is designed to help victims of IEDs by recording information at the site of the blast that can be fed back for analysis by medical professionals GE COTS Rugged Systems reduce time, cost, risk for critical program with time-sensitive needs HUNTSVILLE, AL — GE Intelligent Platforms (NYSE: GE) today announced that it has been working closely with the Georgia Tech Research Institute...

Read More »
OPS+ Collision and Overload Sensor
Position Sensors / Detectors / Transducers

OPS+ Collision and Overload Sensor

The OPS+ effectively protects the robot and end effector from being damaged during a crash.Â- The OPS+ will allow the EOAT to deflect and comply in the event of a crash.  At the same time, a mechanical switch will detect the deflection and send a signal to the robot controller, and then an E-stop can be issued. This protects the system from the damage that would have...

Read More »
Surface Mount Audio Alert offers tape and reel packaging.
Position Sensors / Detectors / Transducers

Surface Mount Audio Alert offers tape and reel packaging.

Measuring 12 x 12 x 6 mm, Model TRSIE-11XX provides sound output of 90 dBA minimum at frequency of 2,400 ±500 Hz. Internal drive, electro-mechanical alert unit is available in two voltage specifications of 5 or 12 Vdc at 15 or 20 mA, respectively. Operating from -30 to +70°C, device comes in flow solder-compatible plastic sealed housing. Tape and reel packaging is available on request.

Read More »
Position Sensors / Detectors / Transducers

Triaxis® Position Sensors feature SAE J2716 SENT protocol.

For safety-critical applications, MLX90366/MLX90367 feature SAE J2716 SENT (Single Edge Nibble Transmission) protocol, 12-bit resolution, and 10-bit accuracy.Â- Products fully support position sensing implementations in challenging environments and are ASIL B SEooC (Safety Elements out of Context)-ready. Future product progression is supported via ROM/firmware changes. Packaging...

Read More »
LVDT Signal Conditioner - S1A
Position Sensors / Detectors / Transducers

LVDT Signal Conditioner - S1A

Alliance Sensors Group Offers The World's Most Advanced AC-LVDT Signal Conditioner Attempts have been made to imitate it, but the S1A has never been duplicated Moorestown, New JerseyÂ- – Alliance Sensors Group offers the model S1A" - the World's finest DIN rail mountable, push button calibrated AC-LVDT Signal Conditioner. With thousands of units in the field and scores of satisfied...

Read More »
Inductive Linear Position Sensors act as drop-in replacements.
Position Sensors / Detectors / Transducers

Inductive Linear Position Sensors act as drop-in replacements.

DesignedÂ- as drop-in form, fit, and function replacement for magnetostrictive sensors, MR Series is used in measuring ram position of hydraulic and pneumatic cylinders. Products are based on contactless inductive sensing technology that employs solid probe construction style, and coil design enables sensors to withstand shock and vibration as well as temperatures to 85°C...

Read More »
LVDT Position Sensors withstand pressures to 5,000 psi.
Position Sensors / Detectors / Transducers

LVDT Position Sensors withstand pressures to 5,000 psi.

Designed for use in subsea measurement systems, SSIR 937 Series Submersible LVDT Position Sensors feature Inconel construction and high pressure Seacon-Brantner subsea connector. Also included is 4–20 mA 2-wire, loop-powered I/O to minimize noise and number of pressure-sealed connections. Rugged sensors have 0.94 in. dia. and are designed for continuous monitoring in pressure-balanced,...

Read More »
Non-Contact Angle Sensors operate in harsh environments.
Position Sensors / Detectors / Transducers

Non-Contact Angle Sensors operate in harsh environments.

Encased in aluminum housing, Vert-X 28HD Series non-contact angle sensors are sealed against ingress of liquids and solids to IP 69K, withstand shock of 50 G and vibration of 20 G, and operate over -40 to +85°C temperature range. Units feature 0-360° measurement range, 12-bit repeatability of 0.1° or better, and maximum hysteresis of 0.1°. Minimum life is 360 million...

Read More »
Rotary Feed-Through supports up to 26 electrical signals.
Position Sensors / Detectors / Transducers

Rotary Feed-Through supports up to 26 electrical signals.

With DDF-I rotary feed-through, 13 of 26 electrical signals are used for valve actuation, while air and vacuum are supplied to actuators via fluid feed-through and slip ring contacts. Center bore enables feed-through of cables, liquids, workpieces, or use of camera. Product's ISO flange pattern connects device to different robots without adapter. Enabling rotation of last robot axis by over...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers