New Paints & Coatings Products

Molding Compounds are suited for hearing aid fabrication.

Available in 14 low-viscosity and 8 high-viscosity verisons, LoctiteÃ-® ResinAid molding compounds are offered in various colors to closely match natural skin tones. Compounds comply with ISO-10993 standards for skin surface medical devices. Line also includes 9 adhesive formulations for bonding shell components. Batch curing chamber, LoctiteÃ-® ResinAid Shell Curing System, light cures...

Epoxy Coating is moisture tolerant.

Dura-PlateÃ-® MT Epoxy, low-VOC, 2-component, bisphenol A, epoxy-amine coating, adheres directly to damp or dry metal surfaces. Low-odor coating can be applied without regard to dew point. It provides performance comparable to MIL-P-23236C, Type VII, Class 15b and 17. Epoxy is suitable for ships, including bilge areas, and other offshore and marine structures as well as oil and fuel storage...

Finishing Chemicals are suited for nonwovens.

Synthebond line of polymers, resins, finishes, and fluorochemical extenders are engineered to deliver hand and color fastness, abrasion resistance, oil and water repellency, and increased strength and rigidity for nonwoven applications. Finishing chemicals feature range of binders, performance finishes, softeners, and soil release agents that optimize performance of products such as window...

Pre-Processed Polyethylene protects steel structures.

Designed to protect industrial steel pipes, Raprex(TM) 400 thermoplastic powder coatings consist of modified, linear low-density polyethylene or high-density polyethylene powders. They can be applied to steel, aluminum, copper, and other metals employing standard powder coating techniques. Coatings adhere to base polyethylene material, through oxidation, without addition of chemical additives or...

Everything You Need to Know About Cold Chain/Temperature Controlled Packaging

This ebook provides an overview of everything you need to know about cold chain and temperature-controlled packaging.

Safety-Color Paints are OSHA approved.

KrylonÃ-® OSHA Paints consist of special-purpose, 16 oz aerosols that visibly mark physical hazards and designate caution, promoting employee safety in workplace. Paints dry in 12 min or less and are available in safety yellow, purple, green, red, orange, blue, white, and black. Each can becomes spray gun when used with Krylon Industrial Snap and Spray(TM) accessory; heavy-duty plastic...

Primer facilitates ink lay down on press prior to printing.

Water-based HR-97 permits adhesion of PVDC to LDPE and PVC films, as well as many other substrates. Typically, only light application weights are needed, and primer can be applied using conventional processing equipment. It is suited for range of industries that include converting, printing, ink, and packaging.

Heat Resistant Coating resists thermal gradients.

EnvirolineÃ-® 405HT withstands high temperature water, oil, and gas in addition to produced water or seawater. It resists combination of water with high-temperature oil or gas. It features high-solids, single-coat, fast cure technology. Applied at 30-35 mil DFT and exposed to internal temperature of 194Ã-

Coating protects surfaces from staining.

Applied by spraying, brushing, or rolling, Liquitite SF protects concrete paves, bricks, stone, marble, metal, wood, and similar surfaces from staining caused by spills of non-corrosive household liquids and harsh materials. It seeps and sinks into surface, providing inside out protection. Crystal clear, water-based, non-flammable coating has built-in fungicides and UV protectors. Full cure takes...

Epoxy Floor Coating offers chemical-resistance.

Designed for floors that experience extreme chemical conditions, Epoxy Novolac is chemical- and acid-resistant. It contains no flammable solvents, meets national V.O.C. emission standards, and emits no unpleasant odor. Providing years of protection against tough abuse, high-gloss epoxy finish is suited for use in high-traffic areas, chemical troughs, storage tanks, splash zones, and warehouses.

Antiquing Concentrate works on various metal surfaces.

Suited for producing brown and black finishes, M25 Antique BlackÃ-® may be used on copper, brass, and bronze alloys as well as zinc die castings and zinc plated surfaces. Product, mixed with water at 10-20%, is suited for blackening or browning copper and brass alloys. Mixed at 5-10%, product is suited for blackening zinc. It works at room temperature, forming tightly adherent conversion...

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.