Michem-® Wood Coating 44 Additive Slows Down Mold and Fungal Growth
Michem® Low-VOC Wood Coating 44 Additive is used in exterior wood stains and sealants to improve weatherability characteristics to the wood coatings. This coating is resistant to water for waterborne deck stains and sealants. Michem® increases surface aesthetics and natural appearance.
Read More »
NANOMYTE® Protective Coatings are resistant to scratch and corrosion.
NEI’s NANOMYTE® Protective Coating Line includes MEND Self-Healing (MEND 1000-, 2000- and 3000-UVP), Top Coats (TC 4001- and 5001-UVP), Easy-to-clean (SR-500EC-UVP) and Anti-ice Coatings (SuperAi-UVP). SR-500EC-UVP and SuperAi-UVP coatings offer a static contact angle of 100 – 105°. This anti-ice coating provides ice adhesion value of less than 1 psi after more than 1,000 hrs of exposure....
Read More »
NANOMYTE-® Protective Coatings are resistant to scratch and corrosion.
NEI’s NANOMYTE® Protective Coating Line includes MEND Self-Healing (MEND 1000-, 2000- and 3000-UVP), Top Coats (TC 4001- and 5001-UVP), Easy-to-clean (SR-500EC-UVP) and Anti-ice Coatings (SuperAi-UVP). SR-500EC-UVP and SuperAi-UVP coatings offer a static contact angle of 100 – 105°. This anti-ice coating provides ice adhesion value of less than 1 psi after more than 1,000 hrs of exposure....
Read More »
Creative Materials' Conductive Inks/Coatings are stretchable and breathable.
Creative Materials’ Conductive Inks/Coatings are offered in 127-48 (silver), 127-48E (silver/silver chloride) and 127-48LR (carbon) variants. These inks can withstand minimum of 50 machine wash and heated dryer cycles. These series coatings can be printed onto synthetic fabrics such as polyester, spandex and nylon. Coatings/Inks are suitable for electrodes, biosensors, heart rate monitoring,...
Read More »
A Quick Guide to MASKING SOLUTIONS
This guide will provide an overview of the different masking options, and provide insight on which to use for your product.
Read More »
Creative Materialsâ™ Conductive Inks/Coatings are stretchable and breathable.
Creative Materials’ Conductive Inks/Coatings are offered in 127-48 (silver), 127-48E (silver/silver chloride) and 127-48LR (carbon) variants. These inks can withstand minimum of 50 machine wash and heated dryer cycles. These series coatings can be printed onto synthetic fabrics such as polyester, spandex and nylon. Coatings/Inks are suitable for electrodes, biosensors, heart rate monitoring,...
Read More »
Birchwood Technologies Gel Products are offered in 1 gal and 5 gal containers.
Birchwood Technologies Gel Products are available in Presto Black® Gel, Antique Brown® Gel, and Antique Black® Gel formulations. Presto Black® Gel is designed for use on non-stainless iron and steel surfaces whereas Antique Brown® and Black® Gel formulations are used on brass, bronze, and copper substrates. These gels takes 2 to 10 minutes for removing oil, oxides and welding flux and are...
Read More »
Birchwood Technologies Gel Products are offered in 1 gal and 5 gal containers.
Birchwood Technologies Gel Products are available in Presto Black® Gel, Antique Brown® Gel, and Antique Black® Gel formulations. Presto Black® Gel is designed for use on non-stainless iron and steel surfaces whereas Antique Brown® and Black® Gel formulations are used on brass, bronze, and copper substrates. These gels takes 2 to 10 minutes for removing oil, oxides and welding flux and are...
Read More »
2K850 UV Cure Coating offers thickness of 200-400 μm.
2K850 UV Cure Coating is suitable for LED, automotive, aerospace and other tough electronic applications. Product is enhanced with edge coverage, adhesion, hardness and scratch resistance capabilities and offers protection against water, moisture and condensation. 2K850 coating meets UL94V-0, IPC-CC-830C, MIL-I-46058C and IEC 61086 standards and features an operating temperature range from -65 to...
Read More »
2K850 UV Cure Coating offers thickness of 200-400 μm.
2K850 UV Cure Coating is suitable for LED, automotive, aerospace and other tough electronic applications. Product is enhanced with edge coverage, adhesion, hardness and scratch resistance capabilities and offers protection against water, moisture and condensation. 2K850 coating meets UL94V-0, IPC-CC-830C, MIL-I-46058C and IEC 61086 standards and features an operating temperature range from -65 to...
Read More »
Electrolube's Silicone Coatings include 2K750, MCS and HCS.
Electrolubes’ 2K750 Conformal coating is compliant to UL94V-0 standards and offers operating range of -40 to +220°C and a cure time of 10 mins at 80°C. Moisture Cure Silicone conformal coating (MCS) and Heat Cure Silicone coating (HCS) are low stress coatings that offer -40 to +200°C operating temperature range. MCS provides touch-dry time of 10 mins at 25°C at ambient conditions whereas...
Read More »
Industry Leading OEM with over 65 Years of Experience
Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.
Read More »
