Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion
Epoxies

Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion

Master Bond EP42HT-2LTE is often chosen for a variety of bonding, sealing, coating and select casting applications in the electronic, aerospace, optical and specialty OEM industries. This two component epoxy has a flowable paste consistency that enables precise alignment with minimal fixturing. It cures at room temperature or more quickly with the addition of heat. This system is notable for...

Read More »
Dry-Film Negative Photoresist suits MEMS, wafer applications.
Photoresists

Dry-Film Negative Photoresist suits MEMS, wafer applications.

Optimized for hot roll lamination and processing on micro electro mechanical systems (MEMS) and IC wafers, DF-3020 comes in thickness formats from 5–50 Â-µm, ±5%. Cured chemistry can withstand harsh environments, including extreme moisture and corrosive chemicals; glass transition temperature is 158°C; and moderate modulus is 3.5 GPa at 25°C. Suited for MEMS and...

Read More »
Coatings

Europlasma Showcases Nanofics® Technology for Corrosion Protection of Wearable Electronics at CES 2015 in Las Vegas

OUDENAARDE, BelgiumÂ- – Belgium based Europlasma, a global leader in low pressure plasma technology, is pleased to present at CES 2015 its nanocoating technology for the electronics industry under the Nanofics® brand name. Europlasma's Nanofics® technology is used worldwide by a renowned customer base for the coating of filtration products, functional textiles, medical...

Read More »
Coatings

The Power of Surface Area

Coral is a vital part of the underwater ecosystem but the temperature of the sea has been affecting coral, killing (an estimated) 25% of it, bleaching large swaths of it, and making it difficult for new natural coral to grow. Humans have been working on ways to spur on new growth of coral to replace what has already died. This New York Times article tells the story of how some scientists believe...

Read More »
Masking Agent protects components during conformal coating.
Masks and Masking

Masking Agent protects components during conformal coating.

Added to latex, No. 8691 Mighty Mask provides short-term, high-temperature protection up to 510°F, safeguarding components during conformal coating processes and component-free areas on PCBs during soldering. Heat-resistant compound will be tack-free in 20 minutes and completely cured in 1 hour. Applied with spatula or supplied squeeze bottle, plastic-safe, peelable solder mask removes by...

Read More »
Chemical-Resistant Coating protects concrete surfaces.
Coatings

Chemical-Resistant Coating protects concrete surfaces.

Protexior® Chemical Resistant Epoxy Top Coat & Primer Kit, combining Novolac epoxy protection integrated with silicone resin technology, protects insulated and un-insulated steel and concrete surfaces. Resistant toÂ- wet-dry thermal cycling, boiling water, and steam, this corrosion- and heat-resistant (up to 450°F), low-VOC coating meets ISO 20340 and ASTM B-117. Indoor/outdoor...

Read More »
Coatings

Vitrabond/3D is a Coil Coated Finish to offer Exceptional Quality and Durability with its Highly Durable Polymer (HDP) Coating

What makes Vitrabond/3D stand out? The pattern is created by orientation of the metallic flecks, creating the unique 3D effect. Believe it or not, this look is achieved with a single color. The benefits? There are multiple benefits of using 3D effects, rather than traditional metal forming techniques such as punching and laser cutting: • No panel deforming • Superior dirt repellence • More...

Read More »
Coatings

Hybrid Coating Technologies to Undergo Pilot with Municipality in California

SAN FRANCISCOÂ- – Hybrid Coating Technologies Inc. (OTCBB:HCTI) is pleased to announce that it is planning to do a pilot application of its Green Polyurethane™ floor coating at a municipal facility in California next month. Upon successful completion of the pilot, as per discussions with the municipality, Hybrid's Green Polyurethane™ would be selected as the official coating...

Read More »
All-New Street-Legal Abarth Finds Its Racing Spirit with Help from Sabic's Lexan Resin and Exatec Coating
Resins

All-New Street-Legal Abarth Finds Its Racing Spirit with Help from Sabic's Lexan Resin and Exatec Coating

SABIC's polycarbonate (PC) glazing solutions were highlighted today during Abarth's official launch of the production model of its Abarth 695 Biposto. The vehicle's front fixed windows, which include built-in sliding panels, are made from SABIC's LEXAN™ resin, a PC material, and EXATEC™ coating technology. The fixed front windows with sliding panels are features straight from...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics