New Motor Controllers and Drives Products

H Bridge integrates 3 dice in surface-mount package.

Suited for automotive applications, Model VNH3SP30 full-bridge driver features output current of 30 A, maximum operating voltage of 40 V, and maximum RDS(on) of 45 mohm per leg. It will support pulse width-modulated operation at up to 10 kHz. Control inputs are compatible with 5 V logic levels. Built around dual monolithic high-side driver and 2 low-side switches, driver is protected against...

Motor Controller is suited for mobile robots.

Microcomputer-based, dual-channel, DC motor controller AX2850 directly drives up to 120 A on each channel at up to 40 V. Both channels can be operated independently or combined. Unit accepts commands from R/C radio or serial port interface and includes inputs for 2 Quadrature Encoders, up to 250 kHz, and 4 limit switches for speed and odometer measurement. Unit also features intelligent current...

Variable Torque Drives offer 98% operating efficiency.

Models VLT 4152 and VLT 4352 are modular, 110-250 kW/150-350 hp units with NEMA12/IP54 rating. They include built-in RFI performance to EN 55011 class B. Power termination design facilitates installation, accepting single box lug or dual cable legs. Logic routing includes tie-down provisions to protect against noise disturbance. Ambient temperature ratings are 40-45Ã-

DC Digital Drives deliver 3 kW of continuous power.

Cello Servo Drives can operate in current, velocity, or position modes and function with variety of feedback options. They feature sinusoidal vector control, trapezoidal vector control, trapezoidal 6-step, and DC commutation methods. Two CANopen ports are installed along with one RS-232 serial port for communications. Models range from 2.25-15 A, at 3 nominal input voltage levels of 48, 85, and...

Wire Harness: A Complete Guide

All you need to know about wire harnesses!

Motor Controllers incorporate sensorless vector drive.

Suited for On-Machine(TM) solutions, ArmorStart(TM) Distributed Motor Controllers feature modular, plug-and-play design. They include 4 inputs and 2 outputs, plus optional keypad for local start/stop control. Devices accept control voltages of 24 Vdc, 120 Vac, or 240 Vac. They control motors ranging from .5-5 hp at 50/60 Hz for non-reversing and reversing applications with voltage range of...

Electrical Drive suits any automation task.

Series DGE-RF features electrical toothed belt axis with internal roller guide. It has sufficient grease reserves that can be replenished without reaching into housing. System includes axes, motors, gearing, coupling, and controller. Coupling concept supports attachment of non-Festo drives. Mounting options on 3 sides of main profile allows DGE-RF to adapt to multi-axis modular system.

Variable Speed Drive maintains precise speed control.

PumpSmart PF 700 incorporates Vector Control with Allen-Bradley Force Technology for low-speed power and performance, previously available from DC drives. Drive regulates motor speed to accuracy of 0.001% and holds full torque at zero speed. Available ratings are from 0.37-110 kW and voltage ratings from 230-600 V. Zero Stacking saves panel space by mounting drives side-by-side. Built-in brake...

Nano Driver reaches 200,000 steps/revolution.

Two-phase NanoDrive(TM) SND100 allows engineers to deploy nano positioning steps with resolution selection dip-switch that provides up to 16 different resolution modes from 1/1 to 1/1000. Plug-and-play driver includes power LED, auto current down function, and auto current adjusting volume function for enabling different output currents to meet stepper motor requirements. Pulse Input switch...

Digital Servo Drive offers power ranges of 1-11 and 2-22 kW.

Kinetix 6000 is available with Line Interface Modules that allow machine builder to handle generation, protection, and control of power. Modules support up to 16 servo drives and provide 65,000 AIC of branch protection without external fusing. Power rail backplane replaces wiring needed by multi-axis servo systems. User can mount 1-8 axes of servos per power rail. Resistive Brake Module supplies...

AC Digital Servo Drive controls brush/brushless motors.

With 32 kbytes on-board, programmable user memory, Bassoon off-line drive delivers up to 1 KW of continuous power (2 KW peak) from 4 x 3 x 2 in. package. Weighing 12.3 oz, it has integrated power supply that controls 5 A @ input voltage range of 30-255 Vac, 50/60 Hz. Product controls DC Brush as well as DC and AC brushless motors and features 2 CANopen ports and one RS-232 serial port. Drives are...

Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics

Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.