New Motor Controllers and Drives Products

AC Adjustable-Speed Drive has compact package.

Flux-vector SECO(TM) SV3000 provides precise control of speed and torque of ac induction motor. Available from 1-350 hp in open-loop and closed-loop models, it features NEMA 4/12 enclosures, line fuses, and application-specific firmware. Unit starts with press of a button, and security codes limit access to authorized persons only. Programmable I/O and multiple communication formats facilitate...

Linear Drive Assemblies offer remote stroke adjustment.

Drive head stroke length on Amacoil/Uhing Model RG linear drive assemblies adjusts via optional remote control knobs located outside of pillow block end supports at end of stop rods. Turning knobs causes end stops to move apart or together, determining drive head reversal points and setting stroke length. Systems provide up to 800 lb of axial thrust and travel speeds to 13 ft/sec at constant RPMs...

Variable Frequency Drives have electronic bypass option.

Offered with Electronic Bypass option, SED2 variable frequency drives (VFDs) are used in HVAC variable torque applications for fans, motors, blowers, and pumps. Electronic Bypass option streamlines installation, simplifies control devices, and reduces wiring. It includes 6 relay outputs, multiple inputs, 2 safety inputs, remote start, and interlock. Touch-sensitive electronic keypad is provided...

Digital Drive is available with SIN/COS feedback.

HARmonica intelligent servo drive provides max current output of 750 W in 82 x 25.4 x 75 mm package and features sinusoidal vector control, trapezoidal vector control, trapezoidal six-step, and DC commutation methods. Unit integrates power switching technology aligned with implementation of CANopen DS-301 and DSP-402 protocols. SIN/COS feedback with integrated interpolation provides interpolation...

The Industrial Vacuum Hoses Buying Guide

Having the right industrial vacuum hose and tools is important for completing tasks properly and efficiently. The right materials should be able to withstand demanding conditions as well as maintain their durability and flexibility.

Brushless DC Speed Controls offer 200 and 400 W models.

Series BX high output power models are available with quiet GFH gearheads or in round shaft version. Standard speed control system provides speed ratio of 100:1 without reduction in torque over speed range of 30-3,000 rpm. Speed regulation relative to load and voltage variations is 0.05%. With up to 8 individual speed settings available, use of OPX-1A control module increases speed range to...

Servo Drives feature velocity loop bandwidth to 800 Hz.

Series S200 Brushless Digital Servo Drives offer 24-bit feedback and 3-5 kHz current loop bandwidth for smooth motion and rapid start and stop. Units are available for AC or DC operation with current ratings from 1 A rms continuous to 18 A rms peak. Keep Alive power input allows rapid recovery from emergency stop conditions. Optically isolated inputs/outputs, positive locking connectors, and full...

PWM Driver controls electromechanical and thermal devices.

DMOS 1.5 A driver Model DRV104 operates from single 8-32 V supply range. It can provide strong initial solenoid closure and automatically switch to soft hold mode for power savings. Duty cycle can be controlled by resistor, analog voltage, or digital-to-analog converter. Status flag pin indicates thermal shutdown or over-current conditions. Separate supply pins for control circuitry and driver...

Step Motor Drive is network compatible.

StepNet(TM) Drives enable steppers to be included in CANopen multi-axis servo networks and operate under DSP402 CANopen protocol for motion control devices. Embedded intelligence enables each drive to execute point-to-point moves with S-curve profiling. Complex profiles, defined by position/velocity/time points, are executed using polynomial interpolation. StepNet drives deliver 5 A continuous...

Low-Voltage AC Drive Series is offered in 1-550 hp range.

Available in NEMA 1 or NEMA 12 enclosures with supply voltages from 208-480 V, ACS550 DriveIT family provides multiple modes of motor control and monitors energy consumption, running hours, or motor revolutions. Control panel features 2 soft keys, HELP button, and real-time clock. Features include Start-up Assistant software; ability to copy, download, and back-up parameters; and EMI/RFI...

Adjustable Frequency Drives offer DeviceNet communications.

Generation 7 AC Drives, suited for industrial applications, are available with DeviceNet communication interface. Drive models available include F7 drive for conventional applications, P7 drive for fans and pumps, and V7 microdrive family for operation in V/Hz or open loop vector modes. DeviceNet-equipped drives provide access to all of drive's monitors and I/O, including digital and analog...

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.