New Motor Controllers and Drives Products

Servo Controller integrates 3 components in one package.

Soloist(TM) single-axis servo controller combines power supply, amplifier, and position controller into one package. Able to control up to 4 tasks simultaneously, it can also handle variables and manage I/O. Incorporated HMI software provides platform for controlling entire process, while WindowsÃ-®-based interface provides diagnostic, development, and analysis tools. Product uses digital...

AC Drive features keypad with cell phone-like familiarity.

DriveIT ACS550 Low Voltage AC Drive features intuitive keypad with start and stop keys, parameter set keys, HELP button, and 2 soft keys. Built-in Start-up Assistant software facilitates start up and tuning of drives. PID Assistant prompts user through 12 questions and uses answers to set 26 parameters inside drive's program. Real-time clock logs date and time of faults, and Parameter Copy...

Motor Controllers are engineered in brushless dc frames.

On-Motor(TM) controllers can be custom-designed completely within PITTMANÃ-® brushless dc motor frames to eliminate external boxes, wires, and bulk. They enable multi-wire brushless dc motors to be converted into 2-wire motors with open loop speed control in voltages from 12-48 V, currents to 8 A, and shaft speeds from 100-15,000 rpm. Products govern shaft direction, speed, and braking, and...

Stepper Motor Driver IC suits automotive applications.

Model A3980 features fault diagnostics and reporting and has integrated DMOS outputs, which are protected against short-to-battery and short-to-ground. STEP and DIRECTION interface allows for up to 1/16th microstepping without complex system controller. Output drivers operate between 7-35 V and will typically run up to 1 A of output current. Offered over junction temperature range of -40 to...

FRP Advantages for Utility Infrastructure

Our eBook, FRP Advantages for Utility Infrastructure, outlines the advantages and applications of FRP for utility structures.

AC Vector Drive suits no-load brake style hoists.

Micro-speedÃ-® Multi-Vector(TM) AC Drive features Gang-SetÃ-® instant programming and internal braking electronics. Resistors are external, so there are no extra modules required and no interface cards to fail. Drive is available for new and retrofit hoists.

Servo Drives let brushed servos outperform brushless servos.

Compact servo drives in MB2 AC Series, available in 8, 16, and 24 A continuous models, can be configured for low- or high-inductance servomotors. Models rated 8 and 16 A operate from 40-220 Vac and have switch selectable peak currents of 2 or 3 times continuous current. Model rated 24 A operates from 40-120 Vac. All drives incorporate LED indicators and digital and analog circuitry and can...

Adjustable Frequency Drive ranges from 1/2-500 hp.

Available in 240 and 480 V ratings, Model G7 incorporates 3-level inverter architecture capable of minimizing or eliminating problems associated with IGBT switching. In open loop vector mode, flux observer algorithms extend speed range, and in closed loop vector mode, 0.01% speed regulation and 1000:1 control range can be achieved. Drive includes auto tuning methods, LCD display, intuitive...

Stepper Motor Controller has USB interface.

Multifunctional micro-step driver operates bipolar stepping motor by local/remote means. Local control and indication are implemented by 2 knobs and 3 LEDs, while remote control and monitoring are implemented via USB interface from PC. Controller incorporates PWM chopper-type sinusoidal driver, fully integrated mixed-signal System-on-a-Chip MCU, and USB controller on one board. Commands are...

Brushless AC Servo Drives offer configurable filtering.

With configuration software, users of MicroFlex single-axis drives can set up application-specific notch or low-pass filtering, which facilitate stiffer control. Available in power ratings of 3, 6, and 9 A, with 200% peak current capability, drives offer space vector modulation, synchronous serial interface, and incremental encoder feedback interfaces. They run from single- or 3-phase supplies...

DC Motor Speed Controls suit power winch applications.

Models and MMP25A-24V deliver 25 A/600 W at 12 and 24 Vdc, respectively. Outer casing is brushed aluminum, and two 6.35 mm dia thru-holes are provided for mounting to any flat surface. Fully-encapsulated design allows units to meet IP-65 standard rating for resistance to elements and harsh environments. Solid-state, unidirectional controls are suited for battery-powered applications that...

Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor

As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.