Turning/Milling Center handles 2 parts simultaneously.

Turning/Milling Center handles 2 parts simultaneously.

Featuring vertical cast machine bed with heavily ribbed, enclosed modular design, Model R200 utilizes two 18,000 rpm motorized milling spindles and 2 movable 5,000 rpm work spindles that perform machining operations in 2 independent subsystems, each capable of full 5-axis machining of bar stock to 65 mm. System offers B-axis swivel ranges of 270° and 230° and rapid traverse rate of 45 m/min. It...

Read More »
End Mills finish steel and exotic materials.

End Mills finish steel and exotic materials.

Useful for demanding aerospace industry, 7-flute center-cutting HSF-7 End Mills are crafted of certified premium sub-micron grain carbide. Tools are available with AlTiN coating for oxidation resistance and extreme hardness for peripheral milling in steels, stainless steel, cast irons, and titanium alloys, as well as cobalt-, nickel- and iron-based high-temperature alloys. Offered in -¼ to 1-¼...

Read More »
Multitasking Turn/Mill System has two 24-tool ATC magazines.

Multitasking Turn/Mill System has two 24-tool ATC magazines.

Occupying 102 ft-² footprint, Super NTMX offers full 5-axis milling capability via Fanuc 31iA5 Control for manufacturing complex contoured components. Front location of ATC Magazines facilitates setup, and inserts can be changed without stopping machine. Machining center employs left and right spindle with speeds up to 5,000 rpm at 15/10 hp. Distance between spindles is 38.58 in., with max...

Read More »
Cutter Head extends tool life and promotes productivity.

Cutter Head extends tool life and promotes productivity.

Along with cutters using multiple face blade geometry, PENTAC PLUS bevel gear cutting system has blade clamp block design that facilitates height/radial adjustments. This promotes precise axial blade movement during cutter building and truing. Design, which enhances chip flow and prevents chip packing, allows gears to be cut with more efficient cycles without premature degradation of cutting...

Read More »
End Mills allow roughing/finishing of steel/exotic materials.

End Mills allow roughing/finishing of steel/exotic materials.

Manufactured with submicron grain carbide, HEVR-5 and HEVR-RN-5 5-flute, variable-pitch end mills are designed to cut ferrous material. Speeds/feeds range from 80-250 sfm and 9-27 ipm for SS, 60-125 sfm and 2-10 ipm for high-temperature alloys, 500-600 sfm and 23-76 ipm for steels, 400-600 sfm and 24-73 ipm for cast irons, and 160-190 sfm and 7-15 ipm for titanium. They are coated for oxidation...

Read More »

Solids Processing Solutions Available at Process Expo 2009 in Las Vegas

QUADRO ENGINEERING CORP. - BOOTH NO.: 7407, will be showcasing a range of their solids processing equipment at Process Expo 2009, in the Las Vegas Convention Center (October 5 - 7, 2009). For laboratory, research and development work, Quadro will be featuring the Quadro® Comil® U5 lab model. Quadro's versatile laboratory lines allow scalable repeatability, emit low heat and dust, achieve an...

Read More »
Bed-Type Milling Machine is suited for large part machining.

Bed-Type Milling Machine is suited for large part machining.

Featuring rigid, heavy-duty cast-iron frame with wide, solid, rectangular guideways, KB 1400 provides consistent milling accuracy on variety of materials. KB Series is equipped with standard 3-axis position indicator and features maximum height adjustment up to 65 ipm and travel area up to 59, 28, and 28 in. in X, Y, and Z axis, respectively, and cutter head which swivels up to 30°. Machine also...

Read More »
Singular Device lets users shakeout and reclaim sand.

Singular Device lets users shakeout and reclaim sand.

Designed to remove and reprocess sand, VIBRA-CLAIM(TM) combines proprietary shakeout design with processing capabilities of VIBRA-MILL® sand reclaimer. This functionality enables sand separation and reclamation, all in one step, and can eliminate need for larger equipment. In addition to increasing production rates and reducing material handling/sand expenses, shakeout and attrition mill...

Read More »
Vertical Milling Machines handle load capacities to 770 lb.

Vertical Milling Machines handle load capacities to 770 lb.

Available with table sizes from 9 x 42 to 10 x 54 in., DX Series is made from treated high-grade cast iron, with hardened and ground X and Y guideways that are coated with Turcite-B. Machines feature X and Y axis ballscrews, heavy-duty alloy spindle, precision angular spindle bearings, and phosphor bronze nut for wear resistance. One-shot lubrication system lubricates all guideways and...

Read More »

SPX Process Equipment Introduces the NEW Premier Mill SuperFLX Horizontal Media Mill

Delavan, WI - April 27, 2009 - The New Premier Mill SuperFLX Horizontal Media Mill offers the features and flexibility that a demanding process requires. This single machine with patented technology can be transformed to process single-pass, multi-pass, high flow recirculation, low to high viscosity materials, fine to large particles and agglomerates with a few simple changes in a compact design....

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics