End Mills remove chips in aluminum applications.

End Mills remove chips in aluminum applications.

Blizzard(TM) series end mills feature 2-flute design and are available in regular and stub lengths. Square and various corner radii are also available. End cut gash and offset teeth permit large depths of cut and maximum feed per tooth. With 1 in. dia, end mills deliver clean cuts at feed rates of 450 ipm and speeds of 9,000 rpm. Slotting operations on stub length tools can be performed at axial...

Read More »
High Feed Milling Cutter suits die and mold industry.

High Feed Milling Cutter suits die and mold industry.

TWINCUT Feed features 3-edge insert that maximizes chip thinning, resulting in feed rates up to 400 ipm. Unit runs at chip loads up to .125 in., and since it cuts at bottom of tool, as opposed to diameter, cutter can work at overhangs of 10 in. or more. TWINCUT Feed performs face milling, pocketing, and 3-D contouring in all steel up to 45Rc, 300, and 400 series stainless steels, and grey and...

Read More »
Face/End Mills generate 90

Face/End Mills generate 90

ValMILL(TM) V590 Cutters accommodate ramping and helical interpolation. They eliminate secondary machining operations that are required when producing 90-

Read More »
Miniature Rib Milling Cutters handle difficult material.

Miniature Rib Milling Cutters handle difficult material.

Hanita square- and ball-nosed end mills, designed for mold and die machining, cut materials such as graphite and steels hardened to 60 Rockwell C at speeds to 150 m/min. Offered in 4 series, Diamond Like Coating or TiAIN coatings are available. Hanita Vision end mills, designed for machining hardened steels up to 67 Rockwell C, operate at speeds to 200 m/min. They give surface finish of 63Ra and...

Read More »
Sponsored

6 Challenges Faced by Supply Chain Leaders in Discrete Manufacturing and How Analytics Solves Them

This eBook describes the challenges faced by Supply Chain Leaders in Discrete Manufacturing. From consumer electronics to automotive manufacturing, most of the global economy's largest industries rely on discrete manufacturing. Manufacturers in these industries face several unique challenges. The COVID-19 pandemic, followed by war, created major disruptions in supply chains worldwide, stressing the need for more integrated, transparent systems that would facilitate proactive management and faster decision-making. With supply chain issues expected to continue in 2022 and beyond, this ebook will help describe to supply chain leaders ways to prepare for certain global challenges.

Read More »
Face Mills increase productivity.

Face Mills increase productivity.

Series KSOM Octagonal Insert Face Mills are -¼ in. thick with -¾ in. inscribed circle. Tool-steel insert pockets are machined in hardened state so they won't deflect. Face mills can be fed at up to 0.030 in. feed per tooth. Screw and finger-clamps keep inserts from moving under extreme cutting forces. Ranging in diameter from 2.5-6 in., units provide 8 cutting edges per insert, 22-

Read More »
Cage Mill offers 2-4 or 6-row design.

Cage Mill offers 2-4 or 6-row design.

Series H Multi-Cage Mill comes in 4 sizes up to 250 tph. Air cannons are mounted at intake and discharge to help prevent build-up of wet sticky material, while heaters are installed on grinder housing to retard buildup of wet material. Hydraulic ram eliminates gear head motor and rack and pinion used on other cage mills. Selective-crushing, controlled-impact mill sizes minerals, agglomerates,...

Read More »
Knife Mill grinds coated tablets for analysis.

Knife Mill grinds coated tablets for analysis.

Grindomix GM 200 is able to grind 20 gelatin-coated tablets in a few seconds, providing homogenous sample for analysis. It features feed size of 10-40 mm and produces final fineness down to approximately 0.3 mm. Parameters can be set for reproducible results. Grindomix GM 200 is particularly suitable for grinding larger tablets and plants with high fat or moisture content.

Read More »
Keyway Cutter machines parts and keyways in one operation.

Keyway Cutter machines parts and keyways in one operation.

New Axis(TM) Keyway Cutter machines keyways and splines without spindle rotation in bores down to -½ in. dia. Harnessing pressure of machining center's coolant system, product combines keyway cutting with turning/boring operations. Unit is available 5 shank sizes and 4 head sizes, each matched with one of 3 cutter diameters. Positive displacement ball piston motor achieves speeds and torque...

Read More »
Aggressive Cutting Tools have smooth cutting action.

Aggressive Cutting Tools have smooth cutting action.

Available in ball nose, taper, flame, sphere, cylinder, dish wheel, and sanding disc styles, Kutzall-® cutting tools include rotary tools, files, hole saws, auger bits, files, hole saws, sanding sleeves and mandrels. Shank sizes for rotary hand tools are -¼ in., and wheel and disc have 5/8 in. bores. Carbide coating and tooth pattern make tools effective for rapid stock removal. They will not...

Read More »
Indexable Insert End Mills handle extreme chip loads.

Indexable Insert End Mills handle extreme chip loads.

Capable of aggressive material removal, Time-S inserts feature stable, precision-manufactured cutter bodies and inserts with blended double-radius cutting edge. Design provides optimum distribution of cutting forces along entire cutting edge, minimizing vibration and ensuring smooth free-cutting at chip loads of up to .100 in. per tooth. Steel removal rates exceed 150 in.-³/min using 80 mm tool,...

Read More »

All Topics