New Turbo Square Shoulder Mills and Inserts Minimize Vibrations for Extended Tool Life
End Mills

New Turbo Square Shoulder Mills and Inserts Minimize Vibrations for Extended Tool Life

Available in 19 metric variants ranging from diameter 40 mm. to 125 mm. and 16 in. variants ranging from 1.50 in. to 5 in. Feature highly accurate geometry with most positive helix angle possible to reduce the likelihood of surface mismatches and enable 90-degree angle accuracy. Improve roughing operations and reduce power consumption in steel, stainless steels, cast iron and high-temperature...

Read More »
New Shoulder Milling Cutter Available in Diameters of 0.5 to 6.0 in.
Mills

New Shoulder Milling Cutter Available in Diameters of 0.5 to 6.0 in.

Xtra·tec® XT M5130 is designed for high productivity and optimum stability, resulting in high process reliability. Handles a wide array of machining operations including face milling, shoulder milling, ramping, pocket milling and circular interpolation operations. Features two pitches for different applications and a stable cross section due to the modified installation position of indexable...

Read More »
New 335.18 and 335.19 Cutters Available in Metric Diameters Ranging from 32 to 125 mm
Paper Cutters and Cutting Machinery

New 335.18 and 335.19 Cutters Available in Metric Diameters Ranging from 32 to 125 mm

Inserts for cutters are available with the full range of grades, edge geometries and corner radii (0.2 - 6.0 mm, 0.008" - 0.236"). Utilizes modular Combimaster™ connections for flexibility as well as good radial and axial reach. Corrosion-resistant cutter body and indexable inserts with four cutting edges allow it to outperform high-speed steel alternatives .

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Kemutec KEK® Cone Mills Process Difficult-to-Grind Materials in Food, Chemical and Pharmaceutical Applications
Material Processing Mills

Kemutec KEK® Cone Mills Process Difficult-to-Grind Materials in Food, Chemical and Pharmaceutical Applications

KEK® Cone Mills by Kemutec, part of the Schenck Process Group, are ideal for fatty, heat sensitive, sticky, moist and other difficult-to-grind applications in the chemical, food and pharmaceutical industries. The energy-efficient mills minimize noise, dust and heat problems typically associated with traditional mills. The KEK® Cone Mills feature a gentle, grinding action, which helps maintain a...

Read More »
New USC-2M and USC-3M Milling Drilling Machines Can Run Oil and Watersoluble Coolant
Milling Machines

New USC-2M and USC-3M Milling Drilling Machines Can Run Oil and Watersoluble Coolant

Feature rigid, robust frames along with their universal spindles for the toughest applications that help mold makers minimize machining time and maximize throughput. Offer CAT 50 spindles up to 40 horsepower and deliver high-torque milling capabilities for aggressive metal removal and shorter cycle times. Come with 60-position automatic tool changer that helps minimize nonproductive time.

Read More »
New OptiMill-SPM Milling Cutters for HighiInfeed Depths
Mills

New OptiMill-SPM Milling Cutters for HighiInfeed Depths

Exploit their strengths during the machining of structural parts made of aluminium. Operates without problems even with large wrapping also in the corners with enormous tool contact and a high load, the tool remains stable. Provides knurled roughing geometry that ensures power consumption during machining is significantly lower compared to tools with a straight cutting edge.

Read More »
New Cone Mills from Gericke are Ideal for Fine Particle Size Reduction
Mills

New Cone Mills from Gericke are Ideal for Fine Particle Size Reduction

Available in three standard models that includes quick release, rotor assembly and a choice of screen sizes, hole shapes and patterns. Developed for milling materials from 150 μm to 12 mm. that allows the gap between the rotor and screen to be quickly adjusted based on the targeted particle size and shape. Offer built-in gap adjustment indicator verifying the particle size selected, efficiency,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers