Panel Meter suits applications that only require display.

Panel Meter suits applications that only require display.

Suited for applications that require basic display only, PAX Lite meter offers NEMA 4X front panel, 0.56 in. LED display, field set-up capabilities, and terminal connections. Series has models for digital inputs, such as count, rate, and process time, as well as analog signals, such as volt, current, process, strain gage, and temperature.

Read More »
Power Meters spot check laser power.

Power Meters spot check laser power.

LaserGage LG100 and LG500 are portable, microprocessor-controlled meters that exhibit ±3% accuracy and ±5% repeatability. Model LG100 features 10-100 W power range with 0.1 W resolution, while Model LG500 features 50-500 W range with 0.5 W resolution. Two line x 12 character display provides measurements. Meters can be set to automatically trigger to laser beam and self-time 5 sec power...

Read More »
Laser Energy Probes feature proprietary coating.

Laser Energy Probes feature proprietary coating.

MaxBlack laser energy probes, J25LP-MB and J45LP-MB, measure laser pulse energy from 200 -µJ to 2J at rep rates to 1,000 pps from 0.19 to 11 -µm. Probes perform at fluency levels up to 265 mJ/cm2 at 1064 nm. Proprietary coating offers significant improvements over large-area, black-painted probes. Probes are more resistant to scratches and laser damage yet maintain features such as flat...

Read More »
Power Probe offers high repeatability.

Power Probe offers high repeatability.

LaserPoint Fit 10 mW automatic, handheld power probe calculates laser power by microprocessor-based measurement of temperature dynamics and provides ±1% repeatability and ±3% accuracy. Two models are offered, covering multiple wavelengths with powers from 500 mW to 200 W. Multifunction LCD simultaneously displays power and wavelength of calibration. Two AA batteries provide enough power for...

Read More »
Turbidimeter takes measurements in lab or field.

Turbidimeter takes measurements in lab or field.

AQUAfast® AQ4500 offers dual light sources that allow reading to comply with EPA 180.1 and ISO 7027. Measurements range from 0-1000 NTU with choice of units including NTU, FTU, FNU, ASBC, and EBC. Datalog capacity is 100 points, which can later be downloaded to printer or computer. Typical battery life is over 1000 hrs. AQ4500 is IP67 waterproof and is correlated with on-line turbidity...

Read More »
Probe provides BOD analysis.

Probe provides BOD analysis.

Dissolved Oxygen AUTO-STIR Probe works with Model 862A DO/BOD/Temperature Meter. Built-in stirrer provides vigorous sample agitation preventing oxygen stratification. Free standing probe stand functions as air calibration beaker and can store probe when not in use. Probe includes one-touch control, dual automatic temperature compensation, and low maintenance polarographic design.

Read More »
Energy Sub-Meters track in-plant energy expenditures.

Energy Sub-Meters track in-plant energy expenditures.

With digital sampling architecture, SBM100 and SBM300 are suited for sub-metering and cost allocation applications. Standard Modbus Protocol via RS485 (up to 32 units daisy chained) or KYZ energy pulses simplify data acquisition and control. Housed in NEMA 4 outdoor rated enclosure, units interface with Energy Management Systems and Building Automation Systems. They mount to any surface and wire...

Read More »
Digital Panel Meter suits process control industry.

Digital Panel Meter suits process control industry.

Model 3830 SMART Rate/Totalizer panel meter includes up to one Form-A, 5 A and three Form-C, 5 A output relays. Microprocesser-based process controller offers 4 analog outputs or RS 232 serial communication. Active in background or foreground, 6-digit totalizer delivers scaled pulsed output to PLCs or other controllers. Unit is available in various DC voltage or current inputs: 0-5 Vdc, 0-10 Vdc,...

Read More »
Frequency Input Rate/Totalizer suits process control industry.

Frequency Input Rate/Totalizer suits process control industry.

Model 3870 SMART digital panel meter series, with 6-digit totalizer mode, can incorporate 1 Form-A, 5 A relay output and 3 Form-C, 5 A relay outputs. With 4 analog outputs or RS 232 serial communications, microprocesser-based process controller provides rate measurements with pulse rate inputs as low as 1 pulse per 100 sec. Setup entries include time base scale, offset, and K factor. Offerings...

Read More »
Thermal Absorber Head measures power of q-switched YAG lasers.

Thermal Absorber Head measures power of q-switched YAG lasers.

Volume Absorbing Head, Model 30(150)A-HE-DIF offers average power measurements up to 30 W, continuous or 150 W, intermittent. Energy density rating is 5 J/cm-² for 1064 nm, and max average power density is 500 W/cm-². Unit provides 3 digital power scales of 3, 30, and 150 W and response time of 4 sec. Information is stored in EEPROM of absorber head and downloaded when display is attached and...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics