
Rapid, Thorough and Dust-Free Blending of Powders
Hauppauge, NY – Ross manufactures Ribbon Blenders used in the process industries for rapid, thorough and dust-free blending of powders, granules, pellets and other bulk solids. Available in many standard sizes from 1/2 to 1,000 cu. ft. working capacity, Ross Ribbon Blenders are built for a wide range of bulk densities and applications with many customizable features to meet any special,...
Read More »
Large Capacity Dual-Shaft Mixers
Hauppauge, NY – Ross Dual-Shaft Mixers deliver an ideal balance of bulk flow agitation and high speed dispersion required in the processing of viscous pastes, gels, suspensions, slurries and emulsions. These machines feature two independently-driven agitators than run at different speeds, imparting varying levels of shear and ensuring adequate turnover over a wide viscosity range. Production...
Read More »
Screw-On IBC Tote Tank Mixer
TT SERIES (1.8 & 3 HP Air Driven) For Plastic Totes with 6-inch Screw-On-Lids •- - - - - - Speed Range: 0-2500 RPM •- - - - - - Light weight: Less than 15 lbs •- - - - - - Easy to Assemble or Move •- - - - - - Includes Speed Control Valve and Muffler •- - - - - - All Wetted parts are 304 Stainless Steel •- - - - - - One of Two Blade...
Read More »
Ross SLIM Powder Injection Mixers with New Hopper Design
Hauppauge, NY – Ross announces new developments to its line of High Shear Mixers with Solids/Liquid Injection Manifold (SLIM) Technology. Designed for high-speed and high-volume mixing requirements, the SLIM is a unique rotor/stator device capable of injecting powders directly into a fast-moving liquid stream without the need for an eductor or pump. One of the key innovations now being offered...
Read More »
PCB Fabrication Notes Guide
The overall purpose of your fabrication notes is to enhance Design for Manufacturability for optimal PCB fabrication and assembly while maintaining applicable industry standards and regulations.
Read More »Positive Displacement Proportioner cuts solvent use.
Equipped with 2 or 4 dosing pumps, ProMix PD2K can manage up to 30 colors and 4 catalysts, and produces mix ratios within 1% accuracy. Since-Â system mixes materials physically closer to gun, flush zone is smaller than traditional systems, allowing end-users to use less paint while accelerating color changes. ProMix PD2K works well for short pot life materials, is compatible with acid-based...
Read More »
Turnkey Systems for Accelerated High-Viscosity Mixing and Discharge
Hauppauge, NY – Ross manufactures a range of turnkey mixing and discharge stations for batching paste-like materials and high-viscosity formulations. The company's Multi-Shaft Mixers, Planetary Dispersers and Double Planetary Mixers are all offered with an optional platen-style Discharge System designed for non-flowable, sticky or heavy mixtures. With push-button simplicity, the system...
Read More »
Ross Inline High Shear Mixers
Hauppauge, NY – Ross Inline High Shear Mixers are a versatile choice for general purpose mixing, powder wet-out, particle size reduction, solubilization, emulsification and homogenization. This type of device features a four-blade rotor running within a close tolerance fixed stator at tip speeds in the range of 3,000-4,000 ft/min, with ultra-high shear designs running at tip speeds over 11,000...
Read More »Agilent Technologies' 3-D EM Simulation Software Selected by Millitech for Mixer, Multiplier and Passive Device Development
SANTA CLARA, Calif. – Agilent Technologies Inc. (NYSE: A) today announced that Millitech Inc., a leading provider in millimeter-wave components, assemblies and subsystems for applications in satellite communications, radiometry, radar and remote sensing, has selected Agilent's Electromagnetic Professional (EMPro) and Advanced Design System (ADS) software for use in developing mixers,...
Read More »
Industrial Controls and Automation Packages from Ross SysCon
Savannah, GA – Ross SysCon has announced that it is branching out its process control and automation services to more applications in the pharmaceutical, food, cosmetics, plastics, adhesives, chemicals, coatings, paper, energy and utilities industries. In one of its most recent projects, Ross SysCon supplied seven (7) NEMA 4X stainless steel enclosures with RX3i multi-rack programmable logic...
Read More »
Low Shear Blending and Vacuum Drying in Ross Vertical Blenders
Hauppauge, NY, – Ross Vertical Blenders are ideal for low shear blending of powders, pellets, granules, fibers and other solids. These blenders feature an auger that turns on its own axis and a mechanical arm that rotates the auger around the conical vessel. The mixing action in a Vertical Blender is far gentler than that of ribbon, paddle or other horizontal blenders, making it more suitable...
Read More »
Don’t Let Your Money Drain Down the Hole…Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »