Impeller / Propeller / Turbine - Agitators / Mixers

Impeller / Propeller / Turbine - Agitators / Mixers

Full Range of Solids/Liquids Processing Solutions from Lab to Production Featured at Interphex 2009 Show

IDEX Sanitary (Quadro Engineering Corp./Wright Flow Technologies) - Booth No.: 736, will be showcasing their full range of solids/liquids processing solutions at Interphex 2009, in the Jacob K. Javits Convention Center, NYC (March 17- 19, 2009). The Solids Division of Quadro Engineering Corp. will feature key technologies such as the QuadroÂ-® Underdriven Series, the new QuadroÂ-®...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Dynamic In-Line Mixer Adapts to Changing Product Life Cycles

A dynamic in-line mixer for lean manufacturing environments that features a patented modular design to let users easily adapt to different products and recipes is available from Bematek Systems, Inc. of Salem, MA. Bematek LZ-Series Sanitary Dynamic In-Line Mixer features a modular mixing head that consists of stators and high speed rotors that can create from 1 to 12 shear action zones for...

Read More »
Horizontal Paste Mixer has mixing capacity of 275-550 gal.
Impeller / Propeller / Turbine - Agitators / Mixers

Horizontal Paste Mixer has mixing capacity of 275-550 gal.

With discharge pump driven by 20 hp motor, Model 42HD is equipped with heavy-duty paddle agitator running at speeds up to 38 rpm, driven by 75 hp explosion proof motor drive. Features include variable frequency inverter to vary speed, type 304 stainless steel wetted parts, and 150 psi stainless steel segmented jacket for heating and cooling. Mixer also has 16 in. pneumatically operated discharge...

Read More »
Batch Mixer dries/dehumidifies/cools bulk solid materials.
Impeller / Propeller / Turbine - Agitators / Mixers

Batch Mixer dries/dehumidifies/cools bulk solid materials.

With all-stainless contact surfaces and suitable for 3-A and USDA applications, Rotary Batch Dryer-Dehumidifier-Cooler uses diagonal, vertical tumbling and spilling motion to optimize particle exposure. This, along with lifters inside drum, minimizes material degradation and promotes process efficiency. Lifters also serve to direct material into discharge spout for 100% evacuation. Ingredients...

Read More »
High Shear Mixer targets process industries.
Impeller / Propeller / Turbine - Agitators / Mixers

High Shear Mixer targets process industries.

Incorporating rotor/stator configuration to promote dual flow through Delta rotor/stator, PM Model offers 15-30 minutes typical cycle times. Designed as batch mixer, it is mounted on conventional air/oil hydraulic lift system, and offers rapid incorporation of powders. Several models are available from 5-200 hp. Intended for use in agglomerate reduction and production of fine emulsions, unit...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Planetary Mixer handles high-viscoity paste materials.

Featuring 316 stainless steel construction and polished to 150 grit finish, Single Planetary Mixer is available in wide range of sizes from 1-300 gallon capacity. Unit is equipped with custom helical mixing blade as well as air/oil hydraulic lift to raise and lower agitator from mix vessel. Providing dust tight operation with numerous charge and sight ports, mixer includes NEMA 4 control panel...

Read More »
Single Planetary Mixer handles high-viscosity materials.
Impeller / Propeller / Turbine - Agitators / Mixers

Single Planetary Mixer handles high-viscosity materials.

Featuring stainless steel type 316 construction polished to 150 grit finish, single planetary mixer is equipped with custom helical mixing blade that allows mixing of high-viscosity paste materials. Unit incorporates multiple charge and sight ports and is built for dust-tight operation. In addition to NEMA 4 control panel purged for Cl1 Div 1 hazardous areas, features include air/oil hydraulic...

Read More »
Top-Entering Agitators offer modular design package.
Impeller / Propeller / Turbine - Agitators / Mixers

Top-Entering Agitators offer modular design package.

Model 20 HT/GT agitators include high-efficiency cast gearbox with heavy-duty output shaft and bearings as well as standard cast dry well seal that eliminates lubrication oil leakage from gearbox. Devices are designed to meet AGMA, OSHA, ANSI, IEC, DIN, EU, and ATEX standards and requirements. Also featuring reversible rotation, they are available in right angle and parallel shaft configurations,...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Miniature Rotary Batch Mixer has 5 ft-³/500 lb capacity.

Model MX-5-SS blends ingredients in ratios as extreme as 1 ppm with 100% uniformity in less than 3 min, regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch components. Rotating drum with proprietary mixing flights gently tumbles, turns, and folds material. For complete evacuation with no residual material, rotating vessel and internal flights lift and...

Read More »

All Topics