Impeller / Propeller / Turbine - Agitators / Mixers

High Shear Mixer targets process industries.
Impeller / Propeller / Turbine - Agitators / Mixers

High Shear Mixer targets process industries.

Incorporating rotor/stator configuration to promote dual flow through Delta rotor/stator, PM Model offers 15-30 minutes typical cycle times. Designed as batch mixer, it is mounted on conventional air/oil hydraulic lift system, and offers rapid incorporation of powders. Several models are available from 5-200 hp. Intended for use in agglomerate reduction and production of fine emulsions, unit...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Planetary Mixer handles high-viscoity paste materials.

Featuring 316 stainless steel construction and polished to 150 grit finish, Single Planetary Mixer is available in wide range of sizes from 1-300 gallon capacity. Unit is equipped with custom helical mixing blade as well as air/oil hydraulic lift to raise and lower agitator from mix vessel. Providing dust tight operation with numerous charge and sight ports, mixer includes NEMA 4 control panel...

Read More »
Single Planetary Mixer handles high-viscosity materials.
Impeller / Propeller / Turbine - Agitators / Mixers

Single Planetary Mixer handles high-viscosity materials.

Featuring stainless steel type 316 construction polished to 150 grit finish, single planetary mixer is equipped with custom helical mixing blade that allows mixing of high-viscosity paste materials. Unit incorporates multiple charge and sight ports and is built for dust-tight operation. In addition to NEMA 4 control panel purged for Cl1 Div 1 hazardous areas, features include air/oil hydraulic...

Read More »
Top-Entering Agitators offer modular design package.
Impeller / Propeller / Turbine - Agitators / Mixers

Top-Entering Agitators offer modular design package.

Model 20 HT/GT agitators include high-efficiency cast gearbox with heavy-duty output shaft and bearings as well as standard cast dry well seal that eliminates lubrication oil leakage from gearbox. Devices are designed to meet AGMA, OSHA, ANSI, IEC, DIN, EU, and ATEX standards and requirements. Also featuring reversible rotation, they are available in right angle and parallel shaft configurations,...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Miniature Rotary Batch Mixer has 5 ft³/500 lb capacity.

Model MX-5-SS blends ingredients in ratios as extreme as 1 ppm with 100% uniformity in less than 3 min, regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch components. Rotating drum with proprietary mixing flights gently tumbles, turns, and folds material. For complete evacuation with no residual material, rotating vessel and internal flights lift and...

Read More »
High Shear Mixer features inline design.
Impeller / Propeller / Turbine - Agitators / Mixers

High Shear Mixer features inline design.

Suited for use in laboratory and pilot plant development efforts, Model 400DL consists of 1-3/8 in. dia rotor which is driven by 1 hp motor at speeds up to 10,000 rpm. Mixer is offered with attached 2.5 gal mix vessel and range of stator heads including slotted, round hole, fine screen, and Quad (4-stage) designs. All wetted surfaces are constructed in 316 stainless steel and special seals are...

Read More »
Chemineer GT Turbine Agitator Offers Mounting and Sealing Options
Impeller / Propeller / Turbine - Agitators / Mixers

Chemineer GT Turbine Agitator Offers Mounting and Sealing Options

Dayton, Ohio - The Chemineer GT Turbine Agitator offers mounting and sealing options to suit any application for unmatched customer value. GT agitators provide cost-efficiency in an advanced parallel shaft design specifically engineered for rugged turbine agitator service. Chemineer open tank GT agitators can be mounted two ways: o Drive-mounting to beams using a heavy-duty, cast housing capable...

Read More »
Mixing Unit includes high shear homogenizer.
Impeller / Propeller / Turbine - Agitators / Mixers

Mixing Unit includes high shear homogenizer.

Suited for mixing, dispersion, and homogenizing systems, Quadro Mixing Unit with Serendip HSH features rotor tip speeds up to 197 ft/s under vacuum processing conditions. Unit delivers no cavitation due to processing staging and has gentle pumping discharge using low-shear force. Typical applications include toothpaste, creams/lotions, adhesives, hair gels/mousses, antacids, sauces/syrups, liquid...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Quadro Enters Partnership with Guelph Food Technology Centre

Quadro is proud to announce a new partnership with the Guelph, Ontario-based Guelph Food Technology Centre (GFTC) to put three new pieces of pilot-scale equipment at the disposal of the Centre. Developing a successful new food product is a risky venture, and carrying out experiments at a pilot-level scale can be a great savings in time, ingredients and frustration , explains Allen Mannen, GFTC's...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics