Paddle Mixer mixes and hydrates sticky materials.
Twin Rotor Hydramix operates in continuous flow without clogging. Self-cleaning design features close tolerances between rotor paddles and container walls to reduce material buildup. Unit has adjustable mixing speed and provides production rates up to 10 tons/hr. Rotors operate at 10 rpm, preventing particle damage during residence times of 20-30 min. Applications include hydration of phosphates...
Read More »
Variable Speed Mixer handles high viscosity materials.
Hand-held Model EHR23/1.2R is equipped with galvanized paddle that can mix concrete, mortar, and epoxy in batches up to 176 lb. Variable-speed, 100-275 rpm motor eliminates splash back. Ergonomic handles ensure comfortable operation and protect mixer motor from dirt. Paddle has helical design that mixes batches from bottom up, preventing splash and keeping air from being sucked into material.
Read More »
Mixing/Flushing System cleans retention basins.
Hydroejector acts as mixer when basin water levels are high and automatically becomes flushing device when water levels are low. Unit ensures that all solid materials are resuspended and flushed as basin is emptied, eliminating need for manual cleanup. To avoid clogging problems, pump is equipped with self-cleaning N-impeller. Ejector pipe removes organic matter from basin and features large...
Read More »
Double Planetary Mixer offers sealed gearbox design.
Model DPM is offered in sizes from Ã-½ pint to 750 gal working capacity. Liquid seal arrangement completely isolates planetary gearbox from mixing zone. It is used where complete cleaning is required between batches, and is also useful for isolation and containment of aggressive solvents or vapors. Model DPM can mix high viscosity products up to 6 million cps. It is offered with several...
Read More »
Increasing Workplace Safety with Beryllium Medical Surveillance
To learn more about how you can develop a workplace safety plan that follows OSHA regulations and fits your company's specific needs, download now.
Read More »
Mixers feature leak-proof drywell design.
QÃ-·EÃ-·DPlus(TM) Mixers have cast iron housing and are available for shaft speeds of 44, 70, 88, and 117 rpm. Standard NEMA C-flange motors range from 1-5 hp. Mixers offer minimum 30,000 hr L10 bearing life and tapered shaft engagement system for easy disassembly. Stuffing box and lip seals are included for closed tanks. Shafting is oversided by Ã-¼ to Ã-½ in. over competitive...
Read More »
Mixer suits noxious, corrosive, or toxic substances.
NimixÃ-® Mixing System features completely sealed mixing chamber providing intrinsically safe, emission-free processing environment. IBC-based mixer units transport chemical intermediate from one location to another within same plant. IBCs can be moved by forklift and when re-suspension is required, IBC is placed on frame over drive station. Back stops guide IBC onto docking position, while...
Read More »
Open Tank Mixer suits low-headroom applications.
Model 60DTD top-entering, gear-reduced mixer offers right-angle drive configuration. It is fitted with Ã-¼ to 5 hp NEMA motor and is available in TEFC, explosion-proof, or wash-down enclosure. Chuck coupling with dual set screws or bolted flange coupling design is utilized for positive shaft attachment. Mixer features cast iron housing and operates at speeds up to 1750 rpm.
Read More »
Turbine Agitator handles applications up to 600,000 gal.
GT features hydrofoil or gas dispersion impellers, double reduction gear drive, and cast iron housing coated with abrasion-resistant, catalyzed polyurethane finish for corrosion resistance in indoor or outdoor environments. Shaft diameters range from 1Ã-½ to 3Ã-½ in. and provide speeds of 11 to 155 rpm. Swing-out design offers easy access to mechanical seal. NEMA or IEC C-flange motors...
Read More »
Combination Mixer handles high-viscosity products.
Tri-Mix Turbo-Shear, for bio-pharm and cosmetics industries, combines scraped-surface, counter-rotating, double-motion agitator and independent, bottom-center mounted, homogenizer head. Agitator handles products up to 2,000,000 cp. Head accepts various disperser designs. Unit handles products up to 10,000 cp alone and viscosities to 50,000 cp and beyond with scraper agitator.
Read More »
Top-Entering Mixers offer range of impeller designs.
DT Mixers are available with marine propeller, collapsible propeller, high efficiency impeller, or dispersion blade. They are fitted with industry standard NEMA motors, gearmotors, and commercially available seals on closed tank units. Mixers range from 1/4 to 5 hp and offer speeds up to 1750 rpm. They are available with flanged or chuck shaft couplings, and various shaft lengths and diameters.
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
