Flaw Sensors / Detectors

Resonant Acoustic Method (NDT-RAM(TM)) is Ideal Method for Ductile Iron Nodularity Testing
Flaw Sensors / Detectors

Resonant Acoustic Method (NDT-RAM(TM)) is Ideal Method for Ductile Iron Nodularity Testing

October 19, 2008, Cincinnati, OH - THE MODAL SHOP, INC.'s Resonant Acoustic Method Nondestructive Test (NDT-RAM(TM)) systems are ideal for nodularity testing for manufacturers or users of ductile iron cast parts. NDT-RAM has proven effective as an in-line solution for many ductile iron parts manufacturers. Low nodularity in a ductile iron part can cause catastrophic failure in the field. Low...

Read More »
Ultrasonic Flaw Detectors offer phased array imaging.
Flaw Sensors / Detectors

Ultrasonic Flaw Detectors offer phased array imaging.

Designed with horizontal case and sunlight-readable VGA display, EPOCH 1000 Series features 6 kHz max pulse rate frequency with single-shot measurements, tunable square wave pulser, digital receiver, and digital filter sets for signal-to-noise clarity. Phased array imaging allows simultaneous inspection of multiple focal laws and various angles in single scan. Detectors are suited for inspections...

Read More »
Inspection System finds small defects in powder metal parts.
Flaw Sensors / Detectors

Inspection System finds small defects in powder metal parts.

Weight Compensation software option for resonant acoustic method (NDT-RAM(TM)) can automate system testing criteria modification based on variances in weight for powder metal components. It conserves time by automatically modifying templates based on part weight and allows software to identify real-time small resonant frequency shifts resulting from internal or external flaws due to cracks,...

Read More »
Corrosion Monitoring System provides online operation.
Flaw Sensors / Detectors

Corrosion Monitoring System provides online operation.

Suited for small scale systems or as building block to full ICMS3 Corrosion Management System, Intelligent Interface Unit provides real-time corrosion rates, erosion rates, and pitting tendency in water systems. System integrates RCS digital Microcor, Quicksand, and Corrater corrosion monitoring transmitters to or through SCADA or DCS system. With Symantec PC Anywhere or Microsoft remote desktop,...

Read More »
Tire Pressure Monitoring System targets commercial vehicles.
Flaw Sensors / Detectors

Tire Pressure Monitoring System targets commercial vehicles.

With sensors mounted externally on valve stem, TireStat(TM) allows air input without sensor removal. System is pre-programmed by wheel position, yet can be altered by user. Rechargeable handheld monitor functions as tire gauge, enabling user to monitor tire pressure while adjusting inflation level. In addition to detecting under-inflated, over-inflated, and rapid leaking tires, TireStat(TM) also...

Read More »
Flaw Sensors / Detectors

Monitor determines external pipeline corrosion rates.

Using Soil Corrosion Rate Monitor, pipeline operators can quantitatively determine soil corrosivity for External Corrosion Direct Assessment pre-assessment process at time of pipe excavation or inspection. Unit consists of soil corrosion rate probe with replaceable cone shaped tip, and electrochemical Corrater® Aquamate LPR instrument, which includes Solution Resistance Compensation to...

Read More »
Macro Modules offer wafer edge and backside inspection.
Flaw Sensors / Detectors

Macro Modules offer wafer edge and backside inspection.

Suitable for any production environment, E30(TM) and B30(TM) modules are suited for inspection and in-line monitoring of 32 nm manufacturing processes from front end of line (FEOL) through final manufacturing. Edge defects as small as 2 Â-µm on patterned, production wafers can be detected. Part of all-surface Explorer(TM) Inspection Cluster, modules can also be used with NSX(TM) Series...

Read More »
Flaw Sensors / Detectors

Fiber Optic Temperature Sensor measures up to 1,000°C.

Based on chiral grating, which is fabricated by twisting or microforming fiber, Helica(TM) Temperature Sensor is designed for applications ranging from weld monitoring and control to turbine engine service and design. Sensing element is monolithic glass fiber and features sensitivity of 0.01 nm/°C, nominal. Probe length is 300 mm standard, sensor/grating length is 15 mm, and sensor...

Read More »
Flaw Sensors / Detectors

Ultrasonic Flaw Detectors offer flexibility as needs change.

Available in 3 upgradeable models, Phasor Flaw Detectors are suited for applications ranging from corrosion monitoring to defect detection and sizing. Portable phased array Phasor XS provides highest resolution and probability of inspection, while mid-level Phasor 16/16 Weld combines phased array and conventional capability and produces full color image scans that can be stored as jpg for remote...

Read More »
Flaw Sensors / Detectors

Talisman Adds Enviroline Monitors

FT. LAUDERDALE, FLORIDA, JULY 28, 2008 Talisman Energy installed an additional 10 Enviroline Hydrogen Monitoring units this month to its network of upstream pipelines through Western Canada in a continued effort to proactively manage pipeline corrosion and integrity. The company has installed more than 25 Enviroline units since October 2007 and has been a strong proponent of the technology for...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics