New Drivers Products

Controller/Driver Chipset suits VRM CPUs and processors.

Model FAN5019 multi-phase PWM controller and Model FAN5009 dual MOSFET driver form chipset that is part of VRM/VRD10.x power solution. Temperature-compensated inductor current sensing measures current and accurately sets and maintains loadline. FAN5009/FAN5019 chipset allows regulators to scale from 2, 3, or 4 phases and conveys 12 V main supply into core supply voltage.

Line Driver/Receiver offer data rates up to 60 Mbps.

Model SP26LV431 quad-channel, differential line driver and Model SP26LV432 quad-channel receiver are EIA/TIA-422-B compliant and provide footprint that is pin-out compatible with industry standard 26C31 and 26C32. Operating on 3.0-3.6 V, devices are suited for point-to-point or multi-drop transmission lines with up to 10 receivers/segment over links up to 4,000 ft. Receiver features open-receiver...

Pre-Driver ICs drive external N-Channel MOSFETs.

Pre-Driver IC Family fills need for driving either DC brush or DC brushless motors in systems with motor supply voltages as low as 7 V and as high as 60 V. Wide operating temperature range, fault diagnostics and reporting, and operation over wide supply voltage make family suited for harsh automotive environment. Each is offered in various options of surface mount packages, including low profile...

Laser Driver handles medium reach optical communications.

Suited for Vertical Cavity Surface Emitting Laser Diodes, 3.2 Gbps Model LTC5100 maintains very low noise transmission eye diagrams. Digital controller with on-chip A/D and D/A converters provides continuous closed-loop monitoring and control of critical laser parameters. Driver can be operated in standalone mode or controlled by external microprocessor via built-in I2C(TM) Serial Interface port....

Saving Energy with Efficient Belt Drives

By introducing energy efficient belts on electric motor drives, you can implement a simple, cost-effective solution to achieve energy savings in your facility.

IGBT Gate-Driver Hybrid provides plug-in solution.

Offered in 90 x 36 mm single-in-line package, 3-phase Model GDBD4410 incorporates noise-immune, pulse-transformer technology to transmit galvanic-isolated pulses to drive 6-pack IGBT inverter modules. Turnkey solution provides 7 gate-drive signals up to Ã-

Secondary Side Drivers protect power MOSFETs.

Models LTC3900 and LTC3901 are rectifier drivers that drive two N-channel MOSFETs and accept pulse synchronization from primary side controller via pulse transformer. Both have timer and current sense comparators to protect external MOSFETs during normal and light load operation, power up/down, and when driver supply voltage drops too low. Model LTC3900 is for forward converter topologies, while...

Screwdriver/Nutdriver includes universal connector wrench.

Twist-a-Nut(TM) 7-in-1 tool offers 3/16 in. and Ã-¼ in. slotted head, No. 1 and No. 2 Phillips head, and Ã-¼ and 5/16 in. nutdriver. Connector wrench is formed into bottom of handle and accepts twist-on connectors from major manufacturers. Soft, black SantopreneÃ-® is overmolded on outer surface of grip for comfort, while harder, high-visibility yellow SantopreneÃ-® is used for...

Machine drives fasteners into steel and aluminum sheets.

AutoRiv 100Ã-® connects to any stamping press, installing up to 360 fasteners per minute from any angle to accommodate different part geometries and tolerances. It simultaneously sets up to 6 self-clinching and self-piercing nuts and studs in transfer or progressive die tools during stamping operations. Unit installs pins, rivets, and bushings and includes die protection system that monitors...

MOSFET Driver tolerates 100 V transients.

Model LTC4440 N-channel 80 V MOSFET driver, housed in SOT-23 and 8-lead MSOP packages, offers peak pull-up output current of 2.4 A and 1.5 ohm pull-down output impedance. Unit reduces MOSFET gate drive fall and rise times to 7 ns and 10 ns, respectively, when driving 1,000 pF loads. Input logic signal is internally level-shifted to bootstrapped supply, which may function at up to 115 V above...

Autofeed Screw System features slip-resistant nose piece.

Series P13 long-extension autofeed screw gun handles 1-3 in. screws in #6 to #12 diameters. Total length of gun with extension is 40 in. Polyethylene covering keeps nose in place as screws are fastened at rates of one every 2-3 seconds. Model P13KDE features dedicated extension, while Model P13KUE has universal/removable extension. Series is suited for drywall and roofing and allows sub-floor and...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!