New Drivers Products

MOSFET Driver suits server and DC/DC power systems.

Accepting 3-24 V input signals, 2 MHz Model TPS28225 controls MOSFET gates from 4.5-8.8 V, with highest power efficiency between 7 and 8 V for 40 A per phase. Unit drives N-channel MOSFETs in synchronous buck, boost, or bridge configurations. It features 14 nsec adaptive dead-time control and 14 nsec propagation delays, as well as 2 A source and 4 A sink drive capability. Driver's 0.4 W impedance...

MOSFET Drivers suit power supply applications over 500 kHz.

Consisting of tiny single drivers for inverting and non-inverting solutions, Series MIC44F18/19/20 targets power supplies and synchronous rectification applications operating at frequencies up to 2 MHz. Output voltage levels can swing within 25 mV of positive supply ground. With input voltage of 4.5-13.2 V, chips are capable of symmetrically sinking and sourcing current up to 6 A with propagation...

National Semiconductor Introduces Industry's Lowest Power Serial Digital Interface Products

Six new high-definition and standard-definition SDI products for the professional broadcast video market NATIONAL ASSOCIATION OF BROADCASTERS CONVENTION, LAS VEGAS, Nevada - April 19, 2006 - National Semiconductor Corporation (NYSE:NSM) today introduced six serial digital interface (SDI) products for professional broadcast video applications. The new products each represent unique industry...

High-Speed MOSFET Drivers offer 12 A peak output current.

Available in 4 package options, TC4451 and TC4452 offer latch-up immunity to provide resistance to ground bounce and negative input transients that cause false triggering in noisy environments. Drive speed of 15 nF in 27 nS enables charge and discharge of transistor gates in switching power supplies. Both models, suited for industrial applications that utilize power supplies, contain...

Tips for Managing Dangerous Dust in Manufacturing Facilities

This eBook covers important considerations when creating a dust management plan for your facility. For more information, download now.

Driver suits MOSFET and SCR gate drive applications.

Solid state relay, dual photovoltaic MOSFET driver Model VO1263AB features open circuit voltage up to 14.6 V typ and short-circuit current up to 42 A typ. Housed in DIP-8 package with lead-free terminations, driver consists of 2 LEDs optically coupled to 2 photodiode arrays to provide isolation voltage of 5,300 V. Applications for device include high-side switches, power solid state relays,...

LED Driver suits medium power portable applications.

Offered in 3 x 3 x 0.9 mm, DFN-10 package, Model NCP5603 supplies constant voltage to load from battery voltage ranges of 2.7-5.5 V. It provides power conversion by means of charge pump structure using 2 external ceramic capacitors. With operating modes of 1, 1.5, and 2 X, unit operates at up to 90% efficiency. Because device allows output current pulse up to 350 mA, it is suitable to drive high...

Collated Screw Systems feature tool-free depth adjustment.

Equipped with 6.6 A motors and 750 W of input power, SuperDrive Models W6V4SD and W6VB3SD can fasten screws measuring Ã-¾-3 in. With no-load speeds of 0-4,500 and 0-2,600 rpm, they provide max torque of 81.5 and 139.6 lb-in., respectively. Suitable for jobs ranging from sub floors to fastening decks, systems are available with screwdriver, 20 in. extension, SuperDrive module, LOX and Phillips...

Zero Delay Buffers operate at speeds to 175 MHz.

Designed for use with SDRAM modules, clock driver Models XRK32510 and XRK39910 accurately align feedback output to clock input signal ensuring zero delay through IC. Each device distributes 1 clock input to bank of 10 outputs, resulting in low-skew, low-jitter copies of each clock. Model XRK39910 offers 8 zero delay outputs with less than 250 ps of output-to-output skew, selectable positive or...

MOSFET Drivers provide high-resolution imaging.

Quad MOSFET Driver ICs, Models MD1810 and MD1811, drive N- and P-channel MOSFETs in applications that require high output current for capacitive load. Both feature 6 ns rise and fall time with 1,000 pF load for use in high frequency ultrasound imaging applications. Low jitter design ensures accurate Doppler measurement and clear imaging. Housed in 16-lead QFN package, drivers are Green and RoHS...

Synthesizer enables clean data converter clocking.

Model CDCM7005 synchronizes VCXO frequency up to 2.2 GHz (LVPECL) to 1 of 2 reference clocks to deliver high-frequency, clean clock outputs. It offers phase noise of -219 dBc/Hz, phase jitter of 162 fs (LVPECL) and 232 fs (LVCMOS), and max output skew of 20 ps. Serial peripheral interface logic facilitates programming and individual support control. Unit provides stable frequencies for...

SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents

Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.